The Relationship Between Surface Roughness And Colour Stability Of Alkasite , Dual-Cure And Bulk-Filler Composites

Digdem Eren; Pelin Sönmez; Büşra Çınar

Makale detayları

The Relationship Between Surface Roughness And Colour Stability Of Alkasite , Dual-Cure And Bulk-Filler Composites

Yazarlar:

Digdem Eren | Pelin Sönmez | Büşra Çınar

Yayıncı:

Istanbul Aydin University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Aydın Dental Journal Vol.11 Issue 1, pp.17-30

Belge Tipi:

Makale

Yayın Tarihi:

4/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001347240

pISSN:

2149-5572

Anahtar kelimeler:

Özet:

 Objectives: This study aims to investigate the surface roughness of four different restorative materials on polished and non-polished surfaces and assess its impact on color stability. Materials and Methods: For the study, we utilized four distinct restorative materials: an alkasite, a nanohybrid composite resin, a dual-cure bulk-fill composite resin, and a posterior bulk-fill composite resin. For each composite resin, polished and non-polished samples were prepared. Following immersion in a coffee solution for a duration of 28 days, the color changes of all samples were assessed with a portable spectrophotometer at days 1, 7, 14, 21 and 28. Surface roughness Ra was evaluated using a conventional profilometer. Additionally, surface analyses were conducted for one sample from each group utilizing Atomic Force Microscopy AFM and Scanning Electron Microscopy SEM. Statistical analyses were performed using the Kruskal-Wallis test, the Mann-Whitney U test, Bonferroni-corrected ANOVA, and Pearson correlation analysis. Results: Upon examining the ΔE values at the conclusion of the 28-day period, significant differences among the groups were observed. Cention N exhibited the greatest color change, while Fill-Up demonstrated the least. Notably, the surface roughness values differed significantly among the groups p0.05. Within the polished groups, Cention N exhibited the highest Ra value, while Filtek One Bulk Fill presented the lowest Ra value. In the samples finished with Mylar strip, Fill-Up showed the highest Ra value and Z 550 showed the lowest Ra value. No linear correlation was identified between the surface roughness and the discoloration of the composite resins. Conclusion: When using acid neutralising ion-releasing alkasite composite, their disadvantage in terms of colouration and surface roughness should be taken into account.

 Objectives: This study aims to investigate the surface roughness of four different restorative materials on polished and non-polished surfaces and assess its impact on color stability. Materials and Methods: For the study, we utilized four distinct restorative materials: an alkasite, a nanohybrid composite resin, a dual-cure bulk-fill composite resin, and a posterior bulk-fill composite resin. For each composite resin, polished and non-polished samples were prepared. Following immersion in a coffee solution for a duration of 28 days, the color changes of all samples were assessed with a portable spectrophotometer at days 1, 7, 14, 21 and 28. Surface roughness Ra was evaluated using a conventional profilometer. Additionally, surface analyses were conducted for one sample from each group utilizing Atomic Force Microscopy AFM and Scanning Electron Microscopy SEM. Statistical analyses were performed using the Kruskal-Wallis test, the Mann-Whitney U test, Bonferroni-corrected ANOVA, and Pearson correlation analysis. Results: Upon examining the ΔE values at the conclusion of the 28-day period, significant differences among the groups were observed. Cention N exhibited the greatest color change, while Fill-Up demonstrated the least. Notably, the surface roughness values differed significantly among the groups p0.05. Within the polished groups, Cention N exhibited the highest Ra value, while Filtek One Bulk Fill presented the lowest Ra value. In the samples finished with Mylar strip, Fill-Up showed the highest Ra value and Z 550 showed the lowest Ra value. No linear correlation was identified between the surface roughness and the discoloration of the composite resins. Conclusion: When using acid neutralising ion-releasing alkasite composite, their disadvantage in terms of colouration and surface roughness should be taken into account.

 Objectives: This study aims to investigate the surface roughness of four different restorative materials on polished and non-polished surfaces and assess its impact on color stability. Materials and Methods: For the study, we utilized four distinct restorative materials: an alkasite, a nanohybrid composite resin, a dual-cure bulk-fill composite resin, and a posterior bulk-fill composite resin. For each composite resin, polished and non-polished samples were prepared. Following immersion in a coffee solution for a duration of 28 days, the color changes of all samples were assessed with a portable spectrophotometer at days 1, 7, 14, 21 and 28. Surface roughness Ra was evaluated using a conventional profilometer. Additionally, surface analyses were conducted for one sample from each group utilizing Atomic Force Microscopy AFM and Scanning Electron Microscopy SEM. Statistical analyses were performed using the Kruskal-Wallis test, the Mann-Whitney U test, Bonferroni-corrected ANOVA, and Pearson correlation analysis. Results: Upon examining the ΔE values at the conclusion of the 28-day period, significant differences among the groups were observed. Cention N exhibited the greatest color change, while Fill-Up demonstrated the least. Notably, the surface roughness values differed significantly among the groups p0.05. Within the polished groups, Cention N exhibited the highest Ra value, while Filtek One Bulk Fill presented the lowest Ra value. In the samples finished with Mylar strip, Fill-Up showed the highest Ra value and Z 550 showed the lowest Ra value. No linear correlation was identified between the surface roughness and the discoloration of the composite resins. Conclusion: When using acid neutralising ion-releasing alkasite composite, their disadvantage in terms of colouration and surface roughness should be taken into account.

 Objectives: This study aims to investigate the surface roughness of four different restorative materials and assess the impact of this roughness on color stability. Methods and Methods: For the study, we utilized four distinct restorative materials: an alkasite, a nanohybrid composite resin, a dual-cure bulk-fill composite resin, and a posterior bulk-fill composite resin. Following immersion in a coffee solution for a duration of 28 days, the color changes of all samples were assessed at five distinct time intervals. Surface roughness Ra was evaluated using a conventional profilometer. Additionally, surface analyses were conducted for one sample from each group utilizing Atomic Force Microscopy AFM and Scanning Electron Microscopy SEM. Results: Upon examining the ΔE values at the conclusion of the 28-day period, significant differences among the groups were observed. Cention N exhibited the greatest color change, while Fill-Up demonstrated the least. Notably, the surface roughness values differed significantly among the groups p0.05. Within the polished groups, Cention N exhibited the highest Ra value, while Filtek One Bulk Fill presented the lowest Ra value. In the samples finished with Mylar strip, Fill-Up showed the highest Ra value and Z 550 showed the lowest Ra value. Conclusion: No linear correlation was identified between the surface roughness and the discoloration of the composite resins. When using acid neutralising ion-releasing alkasite composites, their disadvantage in terms of colouration should be taken into account.

Makale detayları

The Relationship Between Surface Roughness And Colour Stability Of Alkasite , Dual-Cure And Bulk-Filler Composites

Yazarlar:

Digdem Eren | Pelin Sönmez | Büşra Çınar

Yayıncı:

Istanbul Aydin University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Aydın Dental Journal Vol.11 Issue 1, pp.17-30

Belge Tipi:

Makale

Yayın Tarihi:

4/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001347240

pISSN:

2149-5572

Composite Resin

Discoloration

Surface PropertiesAlkasite

composite discoloration

surface roughness

Sayı

Makale detayları

The Relationship Between Surface Roughness And Colour Stability Of Alkasite , Dual-Cure And Bulk-Filler Composites

Yazarlar: Digdem Eren | Pelin Sönmez | Büşra Çınar

Yayıncı: Istanbul Aydin University

Ana Başlıklar: Restoratif Diş Tedavisi

Dergi: Aydın Dental Journal Vol.11 Issue 1, pp.17-30

Belge Tipi: Makale

Yayın Tarihi: 4/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001347240

pISSN: 2149-5572

Composite Resin

Discoloration

Surface PropertiesAlkasite

composite discoloration

surface roughness

Sayı

Yazarlar:

Digdem Eren | Pelin Sönmez | Büşra Çınar

Yayıncı:

Istanbul Aydin University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Aydın Dental Journal Vol.11 Issue 1, pp.17-30

Belge Tipi:

Makale

Yayın Tarihi:

4/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001347240

pISSN:

2149-5572