Effect of the Application Procedure on The Bond Strength of Universal Adhesive in Restoration Repair

N.A.

Makale detayları

Effect of the Application Procedure on The Bond Strength of Universal Adhesive in Restoration Repair

Yazarlar:

N.A.

Yayıncı:

Ataturk University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Current Research in Dental Sciences Vol.34 Issue 3, pp.160-165

Belge Tipi:

Makale

Yayın Tarihi:

7/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001323513

pISSN:

2822-2555

Anahtar kelimeler:

Özet:

 Objective: This study aimed to evaluate the effect of reduced application time on the bond strength of a universal adhesive used for the repair of hybrid ceramic and composite resin restorations. Methods: In the study, a total of 48 rectangular prisms of sizes 762 mm hybrid ceramic Vita Enamic, Zahnfabrik, Germany and composite resin Solare X, GC, Japan specimens were prepared. All samples were aged with 5000 thermal cycles. Then, the upper surfaces of the samples were roughened with a diamond fissure bur 1036µ, 852 FG Meisinger; Hager  Meisinger GmbH, Germany with 5 strokes under water cooling. The samples were divided into 2 subgroups according to the different application times of the adhesive system G-Premio Bond, GC, Japan n12. Then, composite resin Solare X, GC was placed using plastic cylinder molds with 3 mm inner diameter and height and cured with light for 20 seconds. All samples were thermal aged and then a shear bond strength test was conducted. The data were analyzed with Two-way ANOVA and post-hoc Tukey HSD tests p0,05. Results: Two-way ANOVA revealed that the repair bond strength of the 10 seconds of waiting was significantly higher than the quick application for both hybrid ceramic and composite resin p0,05. It was determined that there was no significant difference between hybrid ceramic and composite resin in the both quick application group and 10 seconds waiting group p0,05. Conclusion: Quick application procedure showed lower shear bond strength than 10 seconds waiting group for the repair of both composite resin and hybrid ceramic p0,05. Keywords: Quick application, Application time, Universal adhesive, restoration repair..

 Objective: This study aimed to evaluate the effect of reduced application time on the bond strength of a universal adhesive used for the repair of hybrid ceramic and composite resin restorations. Methods: In the study, a total of 48 rectangular prisms of sizes 762 mm hybrid ceramic Vita Enamic, Zahnfabrik, Germany and composite resin Solare X, GC, Japan specimens were prepared. All samples were aged with 5000 thermal cycles. Then, the upper surfaces of the samples were roughened with a diamond fissure bur 1036µ, 852 FG Meisinger; Hager  Meisinger GmbH, Germany with 5 strokes under water cooling. The samples were divided into 2 subgroups according to the different application times of the adhesive system G-Premio Bond, GC, Japan n12. Then, composite resin Solare X, GC was placed using plastic cylinder molds with 3 mm inner diameter and height and cured with light for 20 seconds. All samples were thermal aged and then a shear bond strength test was conducted. The data were analyzed with Two-way ANOVA and post-hoc Tukey HSD tests p0,05. Results: Two-way ANOVA revealed that the repair bond strength of the 10 seconds of waiting was significantly higher than the quick application for both hybrid ceramic and composite resin p0,05. It was determined that there was no significant difference between hybrid ceramic and composite resin in the both quick application group and 10 seconds waiting group p0,05. Conclusion: Quick application procedure showed lower shear bond strength than 10 seconds waiting group for the repair of both composite resin and hybrid ceramic p0,05. Keywords: Quick application, Application time, Universal adhesive, restoration repair..

 Objective: This study aimed to evaluate the effect of reduced application time on the bond strength of a universal adhesive used for the repair of hybrid ceramic and composite resin restorations. Methods: In the study, a total of 48 rectangular prisms of sizes 762 mm hybrid ceramic Vita Enamic, Zahnfabrik, Germany and composite resin Solare X, GC, Japan specimens were prepared. All samples were aged with 5000 thermal cycles. Then, the upper surfaces of the samples were roughened with a diamond fissure bur 1036µ, 852 FG Meisinger; Hager  Meisinger GmbH, Germany with 5 strokes under water cooling. The samples were divided into 2 subgroups according to the different application times of the adhesive system G-Premio Bond, GC, Japan n12. Then, composite resin Solare X, GC was placed using plastic cylinder molds with 3 mm inner diameter and height and cured with light for 20 seconds. All samples were thermal aged and then a shear bond strength test was conducted. The data were analyzed with Two-way ANOVA and post-hoc Tukey HSD tests p0,05. Results: Two-way ANOVA revealed that the repair bond strength of the 10 seconds of waiting was significantly higher than the quick application for both hybrid ceramic and composite resin p0,05. It was determined that there was no significant difference between hybrid ceramic and composite resin in the both quick application group and 10 seconds waiting group p0,05. Conclusion: Quick application procedure showed lower shear bond strength than 10 seconds waiting group for the repair of both composite resin and hybrid ceramic p0,05. Keywords: Quick application, Application time, Universal adhesive, restoration repair..

 Objective: This study aimed to evaluate the effect of reduced application time on the bond strength of a universal adhesive used for the repair of hybrid ceramic and composite resin restorations. Methods: In the study, a total of 48 rectangular prisms of sizes 762 mm hybrid ceramic Vita Enamic, Zahnfabrik, Germany and composite resin Solare X, GC, Japan specimens were prepared. All samples were aged with 5000 thermal cycles. Then, the upper surfaces of the samples were roughened with a diamond fissure bur 1036µ, 852 FG Meisinger; Hager  Meisinger GmbH, Germany with 5 strokes under water cooling. The samples were divided into 2 subgroups according to the different application times of the adhesive system G-Premio Bond, GC, Japan n12. Then, composite resin Solare X, GC was placed using plastic cylinder molds with 3 mm inner diameter and height and cured with light for 20 seconds. All samples were thermal aged and then a shear bond strength test was conducted. The data were analyzed with Two-way ANOVA and post-hoc Tukey HSD tests p0,05. Results: Two-way ANOVA revealed that the repair bond strength of the 10 seconds of waiting was significantly higher than the quick application for both hybrid ceramic and composite resin p0,05. It was determined that there was no significant difference between hybrid ceramic and composite resin in the both quick application group and 10 seconds waiting group p0,05. Conclusion: Quick application procedure showed lower shear bond strength than 10 seconds waiting group for the repair of both composite resin and hybrid ceramic p0,05. Keywords: Quick application, Application time, Universal adhesive, restoration repair..

Makale detayları

Effect of the Application Procedure on The Bond Strength of Universal Adhesive in Restoration Repair

Yazarlar: N.A.

Yayıncı: Ataturk University

Ana Başlıklar: Restoratif Diş Tedavisi

Dergi: Current Research in Dental Sciences Vol.34 Issue 3, pp.160-165

Belge Tipi: Makale

Yayın Tarihi: 7/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001323513

pISSN: 2822-2555

Quick application

Application time

Universal adhesive

restoration repai

Sayı

Yazarlar:

N.A.

Yayıncı:

Ataturk University

Ana Başlıklar:

Restoratif Diş Tedavisi

Dergi:

Current Research in Dental Sciences Vol.34 Issue 3, pp.160-165

Belge Tipi:

Makale

Yayın Tarihi:

7/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001323513

pISSN:

2822-2555