Customized Acetabular Labrum Mold Using a 3D Printing

R. Buğra HÜSEMOĞLU; Belma NALBANT; Mehmet DİLSİZ; Hasan HAVITÇIOĞLU

Makale detayları

Customized Acetabular Labrum Mold Using a 3D Printing

Yazarlar:

R. Buğra HÜSEMOĞLU | Belma NALBANT | Mehmet DİLSİZ | Hasan HAVITÇIOĞLU

Yayıncı:

Eskişehir Osmangazi University

Ana Başlıklar:

Cerrahi ve ilgili tıbbi uzmanlıklar

Dergi:

Journal of Medical Innovation and Technology 2019 Vol.1 Issue 1, pp.16-20

Belge Tipi:

Makale

Yayın Tarihi:

6/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000486817

Sıklık:

Aylık

eISSN:

2687-3834

pISSN:

2667-8977

Özet:

 

Labral disorders usually occur after trauma, tumour resections, infection and congenital defects. The purpose of labral repair is to protect the underlying pelvis, to reduce any localized pain. Acetabular labrum dissection is a frequent in ortopedical procedure. In this study achieved with the aid of labral prosthesis made from materials such as: synthetic cartilage. Prosthesis production is often costly and requires complex intraoperative processes. Implant customized manufacturing for labral constructs allows for a precise and anatomical reconstruction in a shorter operating time compared to other conventional techniques. We present a, patient-specific method for acetabular labrum mold that ensures surgical success. Patients with labral tears are presented to describe the three-dimensional (3D) printing technique for reconstruction. The Labrum model is designed and manufactured with the help of 3D computed tomography. Both the upper and lower labral model sides were transferred to a 3D printer to obtain a physical model of poly-lactic acid; this was then used in a laboratory to pour the final customized prosthesis in silicone. The exact fit of the labral mold with the labral defect was achieved. Customized 3D labral mold; anatomically appropriate, cost-effective, effective results. In this study, we demonstrated that 3D printing is a clinically highly applicable and easy to use technology for treating anatomically complex geometries.

Makale detayları

Customized Acetabular Labrum Mold Using a 3D Printing

Yazarlar: R. Buğra HÜSEMOĞLU | Belma NALBANT | Mehmet DİLSİZ | Hasan HAVITÇIOĞLU

Yayıncı: Eskişehir Osmangazi University

Ana Başlıklar: Cerrahi ve ilgili tıbbi uzmanlıklar

Dergi: Journal of Medical Innovation and Technology 2019 Vol.1 Issue 1, pp.16-20

Belge Tipi: Makale

Yayın Tarihi: 6/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000486817

Sıklık: Aylık

eISSN: 2687-3834

pISSN: 2667-8977

Sayı

Yazarlar:

R. Buğra HÜSEMOĞLU | Belma NALBANT | Mehmet DİLSİZ | Hasan HAVITÇIOĞLU

Yayıncı:

Eskişehir Osmangazi University

Ana Başlıklar:

Cerrahi ve ilgili tıbbi uzmanlıklar

Dergi:

Journal of Medical Innovation and Technology 2019 Vol.1 Issue 1, pp.16-20

Belge Tipi:

Makale

Yayın Tarihi:

6/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000486817

Sıklık:

Aylık

eISSN:

2687-3834

pISSN:

2667-8977