Characterization of Olive Seed Powder Incorporated Low Density Polyethylene Composites

Sibel Tuna; İbrahim Şen

Makale detayları

Characterization of Olive Seed Powder Incorporated Low Density Polyethylene Composites

Yazarlar:

Sibel Tuna | İbrahim Şen

Yayıncı:

Sakarya University

Ana Başlıklar:

Materials Engineering (Other)

Dergi:

Sakarya University Journal of Science Vol.29 Issue 1, pp.71-82

Belge Tipi:

Makale

Yayın Tarihi:

2/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001341034

pISSN:

2147-835X

Anahtar kelimeler:

Özet:

 Global warming, increasing production and consumption rates, environmental concerns have revealed the need for some innovative material studies, and studies on the use of polymeric composites prepared with natural based fillers have become widespread in order to increase environmental awareness and ensure sustainable production. Composite materials prepared by using easily accessible, affordable, lightweight, high-strength plant based fillers can be used in many areas. In this study, composites of low density polyethylene LDPE, which is one of the most widely used thermoplastics, were prepared by injection moulding process using the waste seeds of olives OS, which have an important place in Turkeys agriculture and economy, and the density, hardness Shore D, spectroscopic Fourier transform infrared FTIR spectroscopy, morphological Scanning electron microscopy SEM, mechanical, thermal Differential Scanning Calorimetry DSC, Heat Deflection Temperature HDT and Vicat softening temperature analyses of OS filled LDPE composites were performed. As a result of the study, an increase in hardness and elastic modulus values of OS filled LDPE composites was observed, while no noticeable decrease in thermal properties was seen.

 Global warming, increasing production and consumption rates, environmental concerns have revealed the need for some innovative material studies, and studies on the use of polymeric composites prepared with natural based fillers have become widespread in order to increase environmental awareness and ensure sustainable production. Composite materials prepared by using easily accessible, affordable, lightweight, high-strength plant based fillers can be used in many areas. In this study, composites of low density polyethylene LDPE, which is one of the most widely used thermoplastics, were prepared by injection moulding process using the waste seeds of olives OS, which have an important place in Turkeys agriculture and economy, and the density, hardness Shore D, spectroscopic Fourier transform infrared FTIR spectroscopy, morphological Scanning electron microscopy SEM, mechanical, thermal Differential Scanning Calorimetry DSC, Heat Deflection Temperature HDT and Vicat softening temperature analyses of OS filled LDPE composites were performed. As a result of the study, an increase in hardness and elastic modulus values of OS filled LDPE composites was observed, while no noticeable decrease in thermal properties was seen.

 Global warming, increasing production and consumption rates, environmental concerns have revealed the need for some innovative material studies, and studies on the use of polymeric composites prepared with natural based fillers have become widespread in order to increase environmental awareness and ensure sustainable production. Composite materials prepared by using easily accessible, affordable, lightweight, high-strength plant based fillers can be used in many areas. In this study, composites of low density polyethylene LDPE, which is one of the most widely used thermoplastics, were prepared by injection moulding process using the waste seeds of olives OS, which have an important place in Turkeys agriculture and economy, and the density, hardness Shore D, spectroscopic Fourier transform infrared FTIR spectroscopy, morphological Scanning electron microscopy SEM, mechanical, thermal Differential Scanning Calorimetry DSC, Heat Deflection Temperature HDT and Vicat softening temperature analyses of OS filled LDPE composites were performed. As a result of the study, an increase in hardness and elastic modulus values of OS filled LDPE composites was observed, while no noticeable decrease in thermal properties was seen.

 Global warming, increasing production and consumption rates, environmental concerns have revealed the need for some innovative material studies, and studies on the use of polymeric composites prepared with natural based fillers have become widespread to increase environmental awareness and ensure sustainable production. Composite materials prepared by using easily accessible, affordable, lightweight, high-strength plant based fillers can be used in many areas. In this study, composites of low density polyethylene LDPE, which is one of the most widely used thermoplastics, were prepared by injection moulding process using the waste seeds of olives OS, which have an important place in Turkeys agriculture and economy, and the density, hardness Shore D, spectroscopic Fourier transform infrared FTIR spectroscopy, morphological Scanning electron microscopy SEM, mechanical, thermal Differential Scanning Calorimetry DSC, Heat Deflection Temperature HDT and Vicat softening temperature analyses of OS filled LDPE composites were performed. As a result of the study, an increase in hardness and elastic modulus values of OS filled LDPE composites was observed, while no noticeable decrease in thermal properties was seen.

Makale detayları

Characterization of Olive Seed Powder Incorporated Low Density Polyethylene Composites

Yazarlar:

Sibel Tuna | İbrahim Şen

Yayıncı:

Sakarya University

Ana Başlıklar:

Materials Engineering (Other)

Dergi:

Sakarya University Journal of Science Vol.29 Issue 1, pp.71-82

Belge Tipi:

Makale

Yayın Tarihi:

2/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001341034

pISSN:

2147-835X

Olive seeds

Natural fillers

Plant based fillers

Green composites

LDPE composites with Natural based fillersOlive Seeds

natural fillers

plant based fillers

green composites

LDPE composites with natural based fillers.

Sayı

Makale detayları

Yazarlar: Sibel Tuna | İbrahim Şen

Yayıncı: Sakarya University

Ana Başlıklar: Materials Engineering (Other)

Dergi: Sakarya University Journal of Science Vol.29 Issue 1, pp.71-82

Belge Tipi: Makale

Yayın Tarihi: 2/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001341034

pISSN: 2147-835X

Sayı

Yazarlar:

Sibel Tuna | İbrahim Şen

Yayıncı:

Sakarya University

Ana Başlıklar:

Materials Engineering (Other)

Dergi:

Sakarya University Journal of Science Vol.29 Issue 1, pp.71-82

Belge Tipi:

Makale

Yayın Tarihi:

2/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001341034

pISSN:

2147-835X