Design and Manufacturing of Shaking Table From Scrap/Used Parts

Ersan Kırar; Muhammed Şerif Yoluk; Cihan Ayhancı

Makale detayları

Design and Manufacturing of Shaking Table From Scrap/Used Parts

Yazarlar:

Ersan Kırar | Muhammed Şerif Yoluk | Cihan Ayhancı

Yayıncı:

Bitlis Eren University

Ana Başlıklar:

Earthquake Engineering | Structural Dynamics | Structural Engineering

Dergi:

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.14 Issue 3, pp.1718-1735

Belge Tipi:

Makale

Yayın Tarihi:

9/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001359261

pISSN:

2147-3129

Anahtar kelimeler:

Özet:

 Structures are exposed to different loadings throughout their lifespan. One of these loadings is the vibration loading caused by earthquakes. Examining the effects of these loading conditions on structures is very important in terms of structural safety. Examining the vibration characteristics of structures using a shaking table is frequently preferred. It has been determined from the literature review that shaking tables can be designed and used as one, two or three axes. However, no study has been found that produces one axes shaking tables using scrapused parts. Therefore, in the study, a low-budget and environmentally friendly shaking table was designed and produced using scrapused parts.

 Structures are exposed to different loadings throughout their lifespan. One of these loadings is the vibration loading caused by earthquakes. Examining the effects of these loading conditions on structures is very important in terms of structural safety. Examining the vibration characteristics of structures using a shaking table is frequently preferred. It has been determined from the literature review that shaking tables can be designed and used as one, two or three axes. However, no study has been found that produces one axes shaking tables using scrapused parts. Therefore, in the study, a low-budget and environmentally friendly shaking table was designed and produced using scrapused parts.

 Structures are exposed to different loadings throughout their lifespan. One of these loadings is the vibration loading caused by earthquakes. Examining the effects of these loading conditions on structures is very important in terms of structural safety. Examining the vibration characteristics of structures using a shaking table is frequently preferred. It has been determined from the literature review that shaking tables can be designed and used as one, two or three axes. However, no study has been found that produces one axes shaking tables using scrapused parts. Therefore, in the study, a low-budget and environmentally friendly shaking table was designed and produced using scrapused parts.

 Structures are exposed to different loadings throughout their lifespan. One of these loadings is the vibration loading caused by earthquakes. Examining the effects of these loading conditions on structures is very important in terms of structural safety. Examining the vibration characteristics of structures using a shaking table is frequently preferred. It has been determined from the literature review that shaking tables can be designed and used as one, two or three axes. However, no study has been found that produces one axes shaking tables using scrapused parts. Therefore, in the study, a low-budget and environmentally friendly shaking table was designed and produced using scrapused parts.

Makale detayları

Design and Manufacturing of Shaking Table From Scrap/Used Parts

Yazarlar:

Ersan Kırar | Muhammed Şerif Yoluk | Cihan Ayhancı

Yayıncı:

Bitlis Eren University

Ana Başlıklar:

Earthquake Engineering | Structural Dynamics | Structural Engineering

Dergi:

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.14 Issue 3, pp.1718-1735

Belge Tipi:

Makale

Yayın Tarihi:

9/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001359261

pISSN:

2147-3129

Earthquake

shaking table

scrap/used parts

Sayı

Makale detayları

Design and Manufacturing of Shaking Table From Scrap/Used Parts

Yazarlar: Ersan Kırar | Muhammed Şerif Yoluk | Cihan Ayhancı

Yayıncı: Bitlis Eren University

Ana Başlıklar: Earthquake Engineering | Structural Dynamics | Structural Engineering

Dergi: Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.14 Issue 3, pp.1718-1735

Belge Tipi: Makale

Yayın Tarihi: 9/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001359261

pISSN: 2147-3129

Earthquake

shaking table

scrap/used parts

Sayı

Yazarlar:

Ersan Kırar | Muhammed Şerif Yoluk | Cihan Ayhancı

Yayıncı:

Bitlis Eren University

Ana Başlıklar:

Earthquake Engineering | Structural Dynamics | Structural Engineering

Dergi:

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.14 Issue 3, pp.1718-1735

Belge Tipi:

Makale

Yayın Tarihi:

9/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001359261

pISSN:

2147-3129