THE EFFECT OF THE INFILL TYPE AND DENSITY ON HARDNESS OF 3D PRINTED PARTS

İsmail BOGREKCI; Pinar DEMIRCIOGLU; Hilmi Saygin SUCUOGLU; Ogulcan TURHANLAR

Makale detayları

THE EFFECT OF THE INFILL TYPE AND DENSITY ON HARDNESS OF 3D PRINTED PARTS

Yazarlar:

İsmail BOGREKCI | Pinar DEMIRCIOGLU | Hilmi Saygin SUCUOGLU | Ogulcan TURHANLAR

Yayıncı:

Kerim ÇETİNKAYA

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

International Journal of 3D Printing Technologies and Digital Industry 2019 Vol.3 Issue 3, pp.212-219

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000473288

Sıklık:

Üç Yıllık

eISSN:

2602-3350

pISSN:

2602-3350

Özet:

 


The aim of
this study is to investigate the effects of the infill type and density on
hardness of the manufactured components with rapid prototyping technique.
Computer Aided Design (CAD) models of specimens were prepared using Autodesk
Inventor Software. Then the models were exported as STL file format for rapid
prototyping. Disc shape specimens were produced with the diameter of 20 mm and
thickness of 5 mm using Prusa İ3 desktop type 3D printer with 90-300 microns
layer height manufacturing capacity. The printer settings were adjusted with
Simplified3D software. The infill types were selected as rectilinear (linear),
grid (diamond) and honeycomb (hexagonal). Layer heights were used as 200
microns for all of the samples. For each infill types; the specimens were
produced with the infill density values of 15, 25, 50, 75 and 100%. The heated
bed temperature was selected as 60 0C to increase the bonding and
surface quality. The extruder temperature was set to 195 0C. Then
the hardness of the manufactured specimens were measured with EMCO-TEST DuraScan
micro hardness machine that has ability to perform Vickers and Knoop methods
range between 10 gf and 10 kgf.  In order
to find the effects of the infill type and density on hardness of 3D printed
specimens, the obtained results from Vickers micro hardness measurements were
compared. The hexagonal infill with the density of 100% showed the highest hardness
and also the hardness patterns could be presented from high to low as Hexagonal
> Linear > Diamond.


.

 


The aim of this study is to investigate the effects of the infill type and density on hardness of the manufactured components with rapid prototyping technique. Computer Aided Design (CAD) models of specimens were prepared using Autodesk Inventor Software. Then the models were exported as STL file format for rapid prototyping. Disc shape specimens were produced with the diameter of 20 mm and thickness of 5 mm using Prusa İ3 desktop type 3D printer with 90-300 microns layer height manufacturing capacity. The printer settings were adjusted with Simplified3D software. The infill types were selected as rectilinear (linear), grid (diamond) and honeycomb (hexagonal). Layer heights were used as 200 microns for all of the samples. For each infill types; the specimens were produced with the infill density values of 15, 25, 50, 75 and 100%. The heated bed temperature was selected as 60 0C to increase the bonding and surface quality. The extruder temperature was set to 195 0C. Then the hardness of the manufactured specimens were measured with EMCO-TEST DuraScan micro hardness machine that has ability to perform Vickers and Knoop methods range between 10 gf and 10 kgf.  In order to find the effects of the infill type and density on hardness of 3D printed specimens, the obtained results from Vickers micro hardness measurements were compared. The hexagonal infill with the density of 100% showed the highest hardness and also the hardness patterns could be presented from high to low as Hexagonal > Linear > Diamond.

.

Makale detayları

THE EFFECT OF THE INFILL TYPE AND DENSITY ON HARDNESS OF 3D PRINTED PARTS

Yazarlar: İsmail BOGREKCI | Pinar DEMIRCIOGLU | Hilmi Saygin SUCUOGLU | Ogulcan TURHANLAR

Yayıncı: Kerim ÇETİNKAYA

Ana Başlıklar: Diğer mühendislik dalları

Dergi: International Journal of 3D Printing Technologies and Digital Industry 2019 Vol.3 Issue 3, pp.212-219

Belge Tipi: Makale

Yayın Tarihi: 12/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000473288

Sıklık: Üç Yıllık

eISSN: 2602-3350

pISSN: 2602-3350

Sayı

Yazarlar:

İsmail BOGREKCI | Pinar DEMIRCIOGLU | Hilmi Saygin SUCUOGLU | Ogulcan TURHANLAR

Yayıncı:

Kerim ÇETİNKAYA

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

International Journal of 3D Printing Technologies and Digital Industry 2019 Vol.3 Issue 3, pp.212-219

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000473288

Sıklık:

Üç Yıllık

eISSN:

2602-3350

pISSN:

2602-3350