MORPHOMETRIC MEASUREMENTS OF HUMERUS SEGMENTS

Özge Al; Emre Atay; Tolga Ertekin; Mehtap Nisari; Harun Ülger

Makale detayları

MORPHOMETRIC MEASUREMENTS OF HUMERUS SEGMENTS

Yazarlar:

Özge Al | Emre Atay | Tolga Ertekin | Mehtap Nisari | Harun Ülger

Yayıncı:

Erciyes University

Ana Başlıklar:

Ortopedi

Dergi:

Sağlık Bilimleri Dergisi Vol.34 Issue 1, pp.40-44

Belge Tipi:

Makale

Yayın Tarihi:

7/2025

Belge Dili:

Türkçe

Document ID (Org No.):

2001342628

pISSN:

1018-3655

Anahtar kelimeler:

Özet:

 Measurements of the segments of the humerus, the longest and thickest bone of the arm, are a help ful factor for both anatomical and skelet on identification. Knowing the lengths mentioned may also be important for orthopedic surgery. To this end, maximum humeral length and some additional morphometric measurements were made on 30 15 right, 15 left adult dry humers of unknown gender. In the study, the morphometric measurementsdistance between; caput humeri - apex of tuberculum majus, proximal point of caput humeri - collumanatomicum, proximal - distal points of fossa olecrani, distal point of fossa olecrani - distal point of trochlea humeri , the proximal point of the fossa olecrani - the distal point of the trochlea humeri, maximum length of the tuberculum majus, maximum length of the tuberculum minus, distance between the apex of the tuberculum minus and the midpoint of the tuberculum majus, epicondylus on the front face The distance between the medialis and epicondyluslateralis, the distance between the lateral and medial ends of the trochlea humeri on the anterior face, and the maximum thickness in the most concave part of the trochlea humeri were recorded using a digital caliper. Pearson correlation analysis was performed between the parameters after calculating the mean values for the right and left humerus  SD. A statistically significant correlation was detected between various measurement parameters and maximum humeral length in the right and left humerus p0.05. As a result, it is expected that all these measurements will be a useful step for forensic, anthropological, archaeological, and orthopedic research.

 Measurements of the segments of the humerus, the longest and thickest bone of the arm, are a help ful factor for both anatomical and skelet on identification. Knowing the lengths mentioned may also be important for orthopedic surgery. To this end, maximum humeral length and some additional morphometric measurements were made on 30 15 right, 15 left adult dry humers of unknown gender. In the study, the morphometric measurementsdistance between; caput humeri - apex of tuberculum majus, proximal point of caput humeri - collumanatomicum, proximal - distal points of fossa olecrani, distal point of fossa olecrani - distal point of trochlea humeri , the proximal point of the fossa olecrani - the distal point of the trochlea humeri, maximum length of the tuberculum majus, maximum length of the tuberculum minus, distance between the apex of the tuberculum minus and the midpoint of the tuberculum majus, epicondylus on the front face The distance between the medialis and epicondyluslateralis, the distance between the lateral and medial ends of the trochlea humeri on the anterior face, and the maximum thickness in the most concave part of the trochlea humeri were recorded using a digital caliper. Pearson correlation analysis was performed between the parameters after calculating the mean values for the right and left humerus  SD. A statistically significant correlation was detected between various measurement parameters and maximum humeral length in the right and left humerus p0.05. As a result, it is expected that all these measurements will be a useful step for forensic, anthropological, archaeological, and orthopedic research.

 Measurements of the segments of the humerus, the longest and thickest bone of the arm, are a help ful factor for both anatomical and skelet on identification. Knowing the lengths mentioned may also be important for orthopedic surgery. To this end, maximum humeral length and some additional morphometric measurements were made on 30 15 right, 15 left adult dry humers of unknown gender. In the study, the morphometric measurementsdistance between; caput humeri - apex of tuberculum majus, proximal point of caput humeri - collumanatomicum, proximal - distal points of fossa olecrani, distal point of fossa olecrani - distal point of trochlea humeri , the proximal point of the fossa olecrani - the distal point of the trochlea humeri, maximum length of the tuberculum majus, maximum length of the tuberculum minus, distance between the apex of the tuberculum minus and the midpoint of the tuberculum majus, epicondylus on the front face The distance between the medialis and epicondyluslateralis, the distance between the lateral and medial ends of the trochlea humeri on the anterior face, and the maximum thickness in the most concave part of the trochlea humeri were recorded using a digital caliper. Pearson correlation analysis was performed between the parameters after calculating the mean values for the right and left humerus  SD. A statistically significant correlation was detected between various measurement parameters and maximum humeral length in the right and left humerus p0.05. As a result, it is expected that all these measurements will be a useful step for forensic, anthropological, archaeological, and orthopedic research.

 Kolun en uzun ve en kalın kemiği olan humerusun segment ölçümleri anatomik olarak önem teşkil etmesinin yanında iskeletin tanımlanması bakımından yardımcı bir faktördür. Bahsi geçen uzunlukların bilinmesi ortopedik cerrahi nezdinde de önemli olabilmektedir. Bu çalışmada 30 15 sağ, 15 sol cinsiyet belirsiz kuru yetişkin humerusunda maksimum humerus uzunluğu ve diğer birtakım parametrelerin ölçümleri gerçekleştirildi. Araştırma kapsamında morfometrik ölçümler caput humerituberculum majusun tepesi arasındaki mesafe, caput humeri tepe noktasıyla collum anatomicum arasındaki mesafe, fossa olecraninin proksimal-distal noktaları arasındaki mesafe, fossa olecrani ile trochlea humerinin distal noktaları arasındaki mesafe, fossa olecraninin proksimal noktası ile trochlea humerinin distal noktası arasındaki mesafe, tuberculum majus uzunluğu, tuberculum minus uzunluğu, tuberculum minusun tepe noktası ile tuberculum majusun orta noktası arasındaki mesafe, önde epicondylus medialis-epicondyluslateralis arasındaki mesafe, ön yüzde trochlea humerinin lateral-medial uçları arasındaki mesafe, trochlea humerinin en çukur kısmının kalınlığı dijital kumpas vasıtasıyla gerçekleştirildi. Her iki ekstremite için ortalama değerlerin hesaplanması sonrası  SD parametreler arası Pearson korelasyon testi gerçekleştirildi. Sağ ve sol humeruslarda çeşitli segment ölçümleriyle maksimum humerus uzunluğuarasında istatistiksel olarak anlamlı bağlantı olduğu tespit edildi p0.05. Sonuç olarak bu ölçümlerin adli, antropolojik, arkeolojik ve ortopedik araştırmalar için faydalı bir basamak olması beklenmektedir.

Makale detayları

MORPHOMETRIC MEASUREMENTS OF HUMERUS SEGMENTS

Yazarlar:

Özge Al | Emre Atay | Tolga Ertekin | Mehtap Nisari | Harun Ülger

Yayıncı:

Erciyes University

Ana Başlıklar:

Ortopedi

Dergi:

Sağlık Bilimleri Dergisi Vol.34 Issue 1, pp.40-44

Belge Tipi:

Makale

Yayın Tarihi:

7/2025

Belge Dili:

Türkçe

Document ID (Org No.):

2001342628

pISSN:

1018-3655

Humerus

humerus segments

morphometric measurementHumerus

humerus segmentleri

morfometrik ölçüm

Sayı

Makale detayları

MORPHOMETRIC MEASUREMENTS OF HUMERUS SEGMENTS

Yazarlar: Özge Al | Emre Atay | Tolga Ertekin | Mehtap Nisari | Harun Ülger

Yayıncı: Erciyes University

Ana Başlıklar: Ortopedi

Dergi: Sağlık Bilimleri Dergisi Vol.34 Issue 1, pp.40-44

Belge Tipi: Makale

Yayın Tarihi: 7/2025

Belge Dili: Türkçe

Document ID (Org No.): 2001342628

pISSN: 1018-3655

Humerus

humerus segments

morphometric measurementHumerus

humerus segmentleri

morfometrik ölçüm

Sayı

Yazarlar:

Özge Al | Emre Atay | Tolga Ertekin | Mehtap Nisari | Harun Ülger

Yayıncı:

Erciyes University

Ana Başlıklar:

Ortopedi

Dergi:

Sağlık Bilimleri Dergisi Vol.34 Issue 1, pp.40-44

Belge Tipi:

Makale

Yayın Tarihi:

7/2025

Belge Dili:

Türkçe

Document ID (Org No.):

2001342628

pISSN:

1018-3655