EXAMINATION OF EFFECT OF AGING PROCEDURE ON SURFACE ROUGHNESS OF DIFFERENT RESTORATIVE MATERIALS

Hakkı Küçükeşmen; Çiğdem Küçükeşmen; Aslıhan Üşümez

Makale detayları

EXAMINATION OF EFFECT OF AGING PROCEDURE ON SURFACE ROUGHNESS OF DIFFERENT RESTORATIVE MATERIALS

Yazarlar:

Hakkı Küçükeşmen | Çiğdem Küçükeşmen | Aslıhan Üşümez

Yayıncı:

Süleyman Demirel University

Dergi:

Suleyman Demirel University The Journal of Health Science 2010 Vol.1 Issue 2, pp.39-48

Belge Tipi:

Makale

Yayın Tarihi:

1/2011

Belge Dili:

İngilizce

Document ID (Org No.):

2000595350

Sıklık:

Üç Yıllık

eISSN:

2146-247X

Özet:

 

EXAMINATION OF EFFECT OF AGING PROCEDURE ON SURFACE ROUGHNESS OF DIFFERENT RESTORATIVE MATERIALS

ABSTRACT

Objective: In this study; the aim was to examine the effect of aging procedure on surface roughness of compomer, composite and ormocer resin restorative material samples after polimerizing with halogen light unit, in vitro.  

Method: In the study, three different compomer resin (Compoglass-F, Glasiosite, Dyract-Extra), two different nanohybrid composite resin (Grandio, Filtek-Supreme) and one ormocer resin (Admira) materials were used. Material samples were placed in “7mm x 1mm” sized cylindirical teflon molds. All samples were polymerized with halogen light unit (n=7, totally 42 samples) (Color:A2). After polimerizing procedure, all samples were subjected to one-year aging procedure with “temperature, moisture and light” loops with an aging device (Atlas Weathering Machine). The surface roughness values were calculated before and after aging procedure. All data were determined with Three-Way-ANOVA and Duncan Multiple-Comparison-Test statistically (p0,05). It was not found any difference between groups due to aging procedure statistically (p >0,05). 

Discussion: Any significant difference on surface roughness was not observed regarding to aging procedure. However, when the types of materials were evaluated, it was observed that the ormocer resin material has shown more surface roughness than all other resin based restorative materials. 


Key words: Dental Restorative Materials, Dental Composites, Light-Cured Composites, Surface Roughness.

 

Özet
Amaç: Bu çalışmada; halojen ışık kaynağıyla polimerize edilen kompomer, kompozit ve ormoser rezin restoratif materyal örnekleri üzerine uygulanan yaşlandırma prosedürünün, materyallerde meydana gelen yüzey pürüzlülüğü üzerine etkisinin in-vitro olarak incelenmesi amaçlanmıştır. 
Yöntem: Çalışmada, 3 farklı kompomer rezin (Compoglass-F, Glasiosite, Dyract-Extra), 2 farklı nanohibrit kompozit rezin (Grandio, Filtek-Supreme) ve 1 ormoser rezin (Admira) materyal kullanıldı. Materyal örnekleri “7mm x 1mm” ebatlarındaki silindirik şekilli teflon kalıplara yerleştirildi ve ardından tüm örnekler halojen ışık kaynağıyla polimerize edildi (n=7, toplam 42 örnek) (Renk: A2). Polimerizasyon işleminin ardından tüm örnekler, “ısı, nem ve ışık döngüleri” ile in-vitro olarak yaşlanma prosedürü uygulayan bir yaşlandırma cihazı (Atlas Weathering Machine) yardımı ile 1-yıllık yaşlanma prosedürüne tabi tutuldu. Yaşlandırma prosedüründen önce ve yaşlandırma prosedürünün ardından örneklerin yüzey pürüzlülük değerleri ölçülerek veriler istatistiksel olarak Üç-Yönlü-ANOVA ve Duncan Çoklu-Karşılaştırma-Testi kullanılarak değerlendirildi (p  0,05). Materyaller arasında istatistiksel olarak en fazla yüzey pürüzlülüğü değerlerini, Admira ormoser rezin restoratif materyalinden oluşan örnekler gösterdi (p  0,05). Tartışma: Çalışmada, yaşlandırma prosedürüne göre, örneklerin yüzey pürüzlülüğü değerleri arasında belirgin bir farklılık bulunmamıştır. Bununla birlikte, çalışmada kullanılan farklı rezin materyaller bakımından, ormoser materyalin diğer materyallere oranla daha fazla yüzey pürüzlülüğü gösterdiği izlenmiştir.

Anahtar Sözcükler: Dental Restorative Materials, Dental Composites, Light-Cured Composites, Surface Roughness.

Abstract
Objective: In this study; the aim was to examine the effect of aging procedure on surface roughness of compomer, composite and ormocer resin restorative material samples after polimerizing with halogen light unit, in vitro.  
Method: In the study, three different compomer resin (Compoglass-F, Glasiosite, Dyract-Extra), two different nanohybrid composite resin (Grandio, Filtek-Supreme) and one ormocer resin (Admira) materials were used. Material samples were placed in “7mm x 1mm” sized cylindirical teflon molds. All samples were polymerized with halogen light unit (n=7, totally 42 samples) (Color:A2). After polimerizing procedure, all samples were subjected to one-year aging procedure with “temperature, moisture and light” loops with an aging device (Atlas Weathering Machine). The surface roughness values were calculated before and after aging procedure. All data were determined with Three-Way-ANOVA and Duncan Multiple-Comparison-Test statistically (p  0,05). It was not found any difference between groups due to aging procedure statistically (p > 0,05). Discussion: Any significant difference on surface roughness was not observed regarding to aging procedure. However, when the types of materials were evaluated, it was observed that the ormocer resin material has shown more surface roughness than all other resin based restorative materials.
 
Key words: Dental Restorative Materials, Dental Composites, Light-Cured Composites, Surface Roughness.

Makale detayları

EXAMINATION OF EFFECT OF AGING PROCEDURE ON SURFACE ROUGHNESS OF DIFFERENT RESTORATIVE MATERIALS

Yazarlar: Hakkı Küçükeşmen | Çiğdem Küçükeşmen | Aslıhan Üşümez

Yayıncı: Süleyman Demirel University

Dergi: Suleyman Demirel University The Journal of Health Science 2010 Vol.1 Issue 2, pp.39-48

Belge Tipi: Makale

Yayın Tarihi: 1/2011

Belge Dili: İngilizce

Document ID (Org No.): 2000595350

Sıklık: Üç Yıllık

eISSN: 2146-247X

Sayı

Yazarlar:

Hakkı Küçükeşmen | Çiğdem Küçükeşmen | Aslıhan Üşümez

Yayıncı:

Süleyman Demirel University

Dergi:

Suleyman Demirel University The Journal of Health Science 2010 Vol.1 Issue 2, pp.39-48

Belge Tipi:

Makale

Yayın Tarihi:

1/2011

Belge Dili:

İngilizce

Document ID (Org No.):

2000595350

Sıklık:

Üç Yıllık

eISSN:

2146-247X