NUMERICAL INVESTIGATION OF THE EFFECTS OF CONE TIP DIAMETERS ON THE EFFICIENCY OF A CYCLONE SEPARATOR

Alaattin Metin KAYA; Musa ÖZKAN

doi:https://doi.org/10.36222/ejt.732223

Makale detayları

NUMERICAL INVESTIGATION OF THE EFFECTS OF CONE TIP DIAMETERS ON THE EFFICIENCY OF A CYCLONE SEPARATOR

Yazarlar:

Alaattin Metin KAYA | Musa ÖZKAN

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2020 Vol.10 Issue 2, pp.395-401

Belge Tipi:

Makale

Yayın Tarihi:

12/2020

Belge Dili:

İngilizce

Document ID (Org No.):

2000425533

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.732223

Özet:

 

Cyclone separators, which are widely used in the cement industry, are very important in terms of preventing air pollution. Many studies on cyclone separators have been done for a long time by means of different models and with considering various parameters. Although much work has been done on the separators, there is no general agreement about the effect of the cone tip diameter on cyclone collection efficiency and / or a pressure drop. In this study, the effect of the cone tip diameter on the cyclone efficiency and the pressure drop was investigated in order to contribute to the literature in this regard. Geometries with four different cone tip diameters (60, 90, 120 and 150 mm) designed for this purpose were examined in three different flow rates and three different particle sizes (2, 4 and 6 µm). In Computational Fluid Dynamics (CFD) analysis, the turbulence was modeled using the Reynolds Stress Model (RSM). As a result of the study, it has been observed that the effect of the cone tip diameter has a non-ignorable importance at varying fluid inlet velocities and particle sizes.

Makale detayları

NUMERICAL INVESTIGATION OF THE EFFECTS OF CONE TIP DIAMETERS ON THE EFFICIENCY OF A CYCLONE SEPARATOR

Yazarlar: Alaattin Metin KAYA | Musa ÖZKAN

Yayıncı: Hibetullah KILIÇ

Ana Başlıklar: Diğer mühendislik dalları

Dergi: European Journal of Technique (EJT) 2020 Vol.10 Issue 2, pp.395-401

Belge Tipi: Makale

Yayın Tarihi: 12/2020

Belge Dili: İngilizce

Document ID (Org No.): 2000425533

eISSN: 2536-5134

pISSN: 2536-5010

DOI: https://doi.org/10.36222/ejt.732223

Sayı

Yazarlar:

Alaattin Metin KAYA | Musa ÖZKAN

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2020 Vol.10 Issue 2, pp.395-401

Belge Tipi:

Makale

Yayın Tarihi:

12/2020

Belge Dili:

İngilizce

Document ID (Org No.):

2000425533

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.732223