Temperature-Dependent Debonding Resistance of 316 Stainless Steel, Inconel 625, and Ti-6AL-4V Alloys

Volkan Arıkan

Makale detayları

Temperature-Dependent Debonding Resistance of 316 Stainless Steel, Inconel 625, and Ti-6AL-4V Alloys

Yazarlar:

Volkan Arıkan

Yayıncı:

Karyay Karadeniz Yayımcılık

Ana Başlıklar:

Makine Mühendisliğinde Sayısal Yöntemler

Dergi:

Black Sea Journal of Engineering and Science Vol.6 Issue 3, pp.287-295

Belge Tipi:

Makale

Yayın Tarihi:

1/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291221

pISSN:

2619-8991

Anahtar kelimeler:

Özet:

 This study investigates the temperature-dependent debonding properties of 316 Stainless Steel SS, Inconel 625, and Ti-6Al-4V alloys in additive manufacturing using the finite element method. The analysis reveals notable relations between in mechanical properties and debonding resistance among these materials. Inconel 625 demonstrates superior performance at elevated temperatures, while SS and Ti-6Al-4V alloys show earlier degradation. Regarding debonding resistance, Inconel 625 performs comparably to SS and Ti-6Al-4V alloys, with Ti-6Al-4V exhibiting consistent resistance below 500 C. SS, however, experiences a rapid loss of debonding resistance at lower temperatures. These findings provide valuable insights for material selection and design optimization in additive manufacturing. Further research can expand our understanding of these materials behavior under different temperature regimes using the finite element method, enhancing their application potential.

 This study investigates the temperature-dependent debonding properties of 316 Stainless Steel SS, Inconel 625, and Ti-6Al-4V alloys in additive manufacturing using the finite element method. The analysis reveals notable relations between in mechanical properties and debonding resistance among these materials. Inconel 625 demonstrates superior performance at elevated temperatures, while SS and Ti-6Al-4V alloys show earlier degradation. Regarding debonding resistance, Inconel 625 performs comparably to SS and Ti-6Al-4V alloys, with Ti-6Al-4V exhibiting consistent resistance below 500 C. SS, however, experiences a rapid loss of debonding resistance at lower temperatures. These findings provide valuable insights for material selection and design optimization in additive manufacturing. Further research can expand our understanding of these materials behavior under different temperature regimes using the finite element method, enhancing their application potential.

 This study investigates the temperature-dependent debonding properties of 316 Stainless Steel SS, Inconel 625, and Ti-6Al-4V alloys in additive manufacturing using the finite element method. The analysis reveals notable relations between in mechanical properties and debonding resistance among these materials. Inconel 625 demonstrates superior performance at elevated temperatures, while SS and Ti-6Al-4V alloys show earlier degradation. Regarding debonding resistance, Inconel 625 performs comparably to SS and Ti-6Al-4V alloys, with Ti-6Al-4V exhibiting consistent resistance below 500 C. SS, however, experiences a rapid loss of debonding resistance at lower temperatures. These findings provide valuable insights for material selection and design optimization in additive manufacturing. Further research can expand our understanding of these materials behavior under different temperature regimes using the finite element method, enhancing their application potential.

 This study investigates the temperature-dependent debonding properties of 316 Stainless Steel SS, Inconel 625, and Ti-6Al-4V alloys in additive manufacturing using the finite element method. The analysis reveals notable relations between in mechanical properties and debonding resistance among these materials. Inconel 625 demonstrates superior performance at elevated temperatures, while SS and Ti-6Al-4V alloys show earlier degradation. Regarding debonding resistance, Inconel 625 performs comparably to SS and Ti-6Al-4V alloys, with Ti-6Al-4V exhibiting consistent resistance below 500 C. SS, however, experiences a rapid loss of debonding resistance at lower temperatures. These findings provide valuable insights for material selection and design optimization in additive manufacturing. Further research can expand our understanding of these materials behavior under different temperature regimes using the finite element method, enhancing their application potential.

Makale detayları

Temperature-Dependent Debonding Resistance of 316 Stainless Steel, Inconel 625, and Ti-6AL-4V Alloys

Yazarlar:

Volkan Arıkan

Yayıncı:

Karyay Karadeniz Yayımcılık

Ana Başlıklar:

Makine Mühendisliğinde Sayısal Yöntemler

Dergi:

Black Sea Journal of Engineering and Science Vol.6 Issue 3, pp.287-295

Belge Tipi:

Makale

Yayın Tarihi:

1/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291221

pISSN:

2619-8991

Debonding resistance

Finite element

Additive manufacturingDebonding resistance

Finite element

Additive manufacturing

Sayı

Makale detayları

Temperature-Dependent Debonding Resistance of 316 Stainless Steel, Inconel 625, and Ti-6AL-4V Alloys

Yazarlar: Volkan Arıkan

Yayıncı: Karyay Karadeniz Yayımcılık

Ana Başlıklar: Makine Mühendisliğinde Sayısal Yöntemler

Dergi: Black Sea Journal of Engineering and Science Vol.6 Issue 3, pp.287-295

Belge Tipi: Makale

Yayın Tarihi: 1/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001291221

pISSN: 2619-8991

Debonding resistance

Finite element

Additive manufacturingDebonding resistance

Finite element

Additive manufacturing

Sayı

Yazarlar:

Volkan Arıkan

Yayıncı:

Karyay Karadeniz Yayımcılık

Ana Başlıklar:

Makine Mühendisliğinde Sayısal Yöntemler

Dergi:

Black Sea Journal of Engineering and Science Vol.6 Issue 3, pp.287-295

Belge Tipi:

Makale

Yayın Tarihi:

1/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001291221

pISSN:

2619-8991