Effect of parameters determining production time on the dimensional accuracy of additive  manufacturing by material extrusion

Mumin Tutar; Emre Berke Ay; Berat Madenci

Makale detayları

Effect of parameters determining production time on the dimensional accuracy of additive manufacturing by material extrusion

Yazarlar:

Mumin Tutar | Emre Berke Ay | Berat Madenci

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Optimization in Manufacturing

Dergi:

Journal of Advances in Manufacturing Engineering Vol.6 Issue 1, pp.7-13

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001353552

pISSN:

2717-7203

Anahtar kelimeler:

Özet:

 Additive manufacturing via material extrusion has attracted significant attention due to its ability to produce complex geometries with low material consumption. However, in this method, the production time and the dimensional accuracy of the parts produced generally include parameters that have opposite effects on each other. In other words, parameter values that increase dimensional accuracy also increase production time. This study investigated how the most important parameters affecting production time, layer thickness and printing speed, affect dimensional accuracy. An experimental design was created using the Taguchi L9 orthogonal array and the dimensions of the cubes produced according to this design were measured using a CMM in the X, Y and Z directions and their dimensional accuracies were evaluated. In addition, contribution of the parameters on dimensional accuracy was evaluated with ANOVA.

 Additive manufacturing via material extrusion has attracted significant attention due to its ability to produce complex geometries with low material consumption. However, in this method, the production time and the dimensional accuracy of the parts produced generally include parameters that have opposite effects on each other. In other words, parameter values that increase dimensional accuracy also increase production time. This study investigated how the most important parameters affecting production time, layer thickness and printing speed, affect dimensional accuracy. An experimental design was created using the Taguchi L9 orthogonal array and the dimensions of the cubes produced according to this design were measured using a CMM in the X, Y and Z directions and their dimensional accuracies were evaluated. In addition, contribution of the parameters on dimensional accuracy was evaluated with ANOVA.

 Additive manufacturing via material extrusion has attracted significant attention due to its ability to produce complex geometries with low material consumption. However, in this method, the production time and the dimensional accuracy of the parts produced generally include parameters that have opposite effects on each other. In other words, parameter values that increase dimensional accuracy also increase production time. This study investigated how the most important parameters affecting production time, layer thickness and printing speed, affect dimensional accuracy. An experimental design was created using the Taguchi L9 orthogonal array and the dimensions of the cubes produced according to this design were measured using a CMM in the X, Y and Z directions and their dimensional accuracies were evaluated. In addition, contribution of the parameters on dimensional accuracy was evaluated with ANOVA.

 Additive manufacturing via material extrusion has attracted significant attention due to its ability to produce complex geometries with low material consumption. However, in this method, the production time and the dimensional accuracy of the parts produced generally include parameters that have opposite effects on each other. In other words, parameter values that increase dimensional accuracy also increase production time. This study investigated how the most important parameters affecting production time, layer thickness and printing speed, affect dimensional accuracy. An experimental design was created using the Taguchi L9 orthogonal array and the dimensions of the cubes produced according to this design were measured using a CMM in the X, Y and Z directions and their dimensional accuracies were evaluated. In addition, contribution of the parameters on dimensional accuracy was evaluated with ANOVA.

Makale detayları

Effect of parameters determining production time on the dimensional accuracy of additive manufacturing by material extrusion

Yazarlar:

Mumin Tutar | Emre Berke Ay | Berat Madenci

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Optimization in Manufacturing

Dergi:

Journal of Advances in Manufacturing Engineering Vol.6 Issue 1, pp.7-13

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001353552

pISSN:

2717-7203

Additive manufacturing

Fused filament fabrication

Dimensional accuracy

Design of experiment

Sayı

Makale detayları

Effect of parameters determining production time on the dimensional accuracy of additive manufacturing by material extrusion

Yazarlar: Mumin Tutar | Emre Berke Ay | Berat Madenci

Yayıncı: Yildiz Technical University

Ana Başlıklar: Optimization in Manufacturing

Dergi: Journal of Advances in Manufacturing Engineering Vol.6 Issue 1, pp.7-13

Belge Tipi: Makale

Yayın Tarihi: 6/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001353552

pISSN: 2717-7203

Additive manufacturing

Fused filament fabrication

Dimensional accuracy

Design of experiment

Sayı

Yazarlar:

Mumin Tutar | Emre Berke Ay | Berat Madenci

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Optimization in Manufacturing

Dergi:

Journal of Advances in Manufacturing Engineering Vol.6 Issue 1, pp.7-13

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001353552

pISSN:

2717-7203