The Bond Strength of Universal Adhesives with Different Acidities to Calcium Silicate-Based Materials

Elif KALYONCUOĞLU; Cangül KESKİN; Duygu ACAR; Nihan GONULOL

doi:https://doi.org/10.33808/clinexphealthsci.740487

Makale detayları

The Bond Strength of Universal Adhesives with Different Acidities to Calcium Silicate-Based Materials

Yazarlar:

Elif KALYONCUOĞLU | Cangül KESKİN | Duygu ACAR | Nihan GONULOL

Yayıncı:

Marmara University

Ana Başlıklar:

Sağlık teşvikleri

Dergi:

Clinical and Experimental Health Sciences 2021 Vol.11 Issue 1, pp.170-174

Belge Tipi:

Makale

Yayın Tarihi:

3/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000906897

Sıklık:

Aylık

eISSN:

2459-1459

DOI:

https://doi.org/10.33808/clinexphealthsci.740487

Özet:

 


Objective: To compare the micro-shear bond strengths of 3 different universal adhesives to 2 different calcium silicate-based materials. 

Methods: A hole was prepared in the center of the top surfaces of 60 cylindrical acrylic blocks, and the blocks were randomly divided into 2 groups (n=30) according to biomaterial filling; NeoMTA Plus (Avalon Biomed Inc. Bradenton, FL, USA) and ProRoot MTA (Dentsply Tulsa, Tulsa, OK, USA). Biomaterials were prepared according to the manufacturers’ instructions. The sample surfaces were flattened after the initial setting, and the samples were incubated for 24h at 37°C. After placing the biomaterials in the prepared holes, the specimens were randomly divided into 3 subgroups (n=10) according to adhesive; G-Premio Bond (GC Corp., Tokyo, Japan), All-Bond Universal (Bisco, Inc., Schaumburg, IL, USA) and Single Bond Universal (3M ESPE, St Paul, MN, USA). Adhesives were applied to the specimens and polymerized. A micro-hybrid composite resin (Filtek Z250, 3M ESPE, MN, USA) was then placed on the specimen surfaces and polymerized. Micro-shear bond strengths were tested using a universal testing device (LRX, Lloyd Instruments, Farnham, UK). A Shapiro-Wilk test confirmed normal distribution, and 2-way ANOVA was used for statistical analysis. 

Result: No significant differences were found in the shear bond strengths of any of the tested adhesives to either of the calcium silicate-based materials (p>0.05). 

Conclusion: The results indicate that the acidity of a universal adhesive does not affect the bond strength of composite resin to calcium silicate-based materials.

.

Makale detayları

The Bond Strength of Universal Adhesives with Different Acidities to Calcium Silicate-Based Materials

Yazarlar: Elif KALYONCUOĞLU | Cangül KESKİN | Duygu ACAR | Nihan GONULOL

Yayıncı: Marmara University

Ana Başlıklar: Sağlık teşvikleri

Dergi: Clinical and Experimental Health Sciences 2021 Vol.11 Issue 1, pp.170-174

Belge Tipi: Makale

Yayın Tarihi: 3/2021

Belge Dili: İngilizce

Document ID (Org No.): 2000906897

Sıklık: Aylık

eISSN: 2459-1459

DOI: https://doi.org/10.33808/clinexphealthsci.740487

Sayı

Yazarlar:

Elif KALYONCUOĞLU | Cangül KESKİN | Duygu ACAR | Nihan GONULOL

Yayıncı:

Marmara University

Ana Başlıklar:

Sağlık teşvikleri

Dergi:

Clinical and Experimental Health Sciences 2021 Vol.11 Issue 1, pp.170-174

Belge Tipi:

Makale

Yayın Tarihi:

3/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000906897

Sıklık:

Aylık

eISSN:

2459-1459

DOI:

https://doi.org/10.33808/clinexphealthsci.740487