Some machining properties of 4 wood species grown in Turkey

Sait Dündar SOFUOĞLU; Ahmet KURTOĞLU

Makale detayları

Some machining properties of 4 wood species grown in Turkey

Yazarlar:

Sait Dündar SOFUOĞLU | Ahmet KURTOĞLU

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Agriculture and Forestry 2014 Vol.38 Issue 3, pp.420-427

Belge Tipi:

Makale

Yayın Tarihi:

5/2014

Belge Dili:

Türkçe

Document ID (Org No.):

2000807411

Sıklık:

İki Aylık

eISSN:

1303-6173

pISSN:

1300-011X

Anahtar kelimeler:

Özet:

 

Determining wood machining properties and defining convenient usage areas for native wood species is important for evaluating surface quality. Wood machining is a performance criterion indicated after planing, shaping, turning, mortising, boring, and sanding. This study selected 2 softwood species (European black pine and cedar of Lebanon) as well as 2 hardwood species (sessile oak and black poplar), which are commonly used and grown in Turkey. Preparation of samples and machining were carried out according to the 2004 ASTM D 1666 standards for determining machining properties. Sessile oak (Quercus petraea) had an excellent performance in all machining processes. Black poplar (Populus nigra L.) yielded the lowest results for the sanding test. A perfect surface quality was obtained with a feed rate of 8.6 m/min for hardwoods at a 25° cutting angle in planing, and at a 15° angle for softwoods.

 

Determining wood machining properties and defining convenient usage areas for native wood species is important for evaluating surface quality. Wood machining is a performance criterion indicated after planing, shaping, turning, mortising, boring, and sanding. This study selected 2 softwood species (European black pine and cedar of Lebanon) as well as 2 hardwood species (sessile oak and black poplar), which are commonly used and grown in Turkey. Preparation of samples and machining were carried out according to the 2004 ASTM D 1666 standards for determining machining properties. Sessile oak (Quercus petraea) had an excellent performance in all machining processes. Black poplar (Populus nigra L.) yielded the lowest results for the sanding test. A perfect surface quality was obtained with a feed rate of 8.6 m/min for hardwoods at a 25° cutting angle in planing, and at a 15° angle for softwoods.

Makale detayları

Some machining properties of 4 wood species grown in Turkey

Yazarlar:

Sait Dündar SOFUOĞLU | Ahmet KURTOĞLU

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Agriculture and Forestry 2014 Vol.38 Issue 3, pp.420-427

Belge Tipi:

Makale

Yayın Tarihi:

5/2014

Belge Dili:

Türkçe

Document ID (Org No.):

2000807411

Sıklık:

İki Aylık

eISSN:

1303-6173

pISSN:

1300-011X

Key words: Wood

machining properties

planing

shaping

boring

sanding

Sayı

Makale detayları

Some machining properties of 4 wood species grown in Turkey

Yazarlar: Sait Dündar SOFUOĞLU | Ahmet KURTOĞLU

Yayıncı: TUBITAK

Dergi: Turkish Journal of Agriculture and Forestry 2014 Vol.38 Issue 3, pp.420-427

Belge Tipi: Makale

Yayın Tarihi: 5/2014

Belge Dili: Türkçe

Document ID (Org No.): 2000807411

Sıklık: İki Aylık

eISSN: 1303-6173

pISSN: 1300-011X

Key words: Wood

machining properties

planing

shaping

boring

sanding

Sayı

Yazarlar:

Sait Dündar SOFUOĞLU | Ahmet KURTOĞLU

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Agriculture and Forestry 2014 Vol.38 Issue 3, pp.420-427

Belge Tipi:

Makale

Yayın Tarihi:

5/2014

Belge Dili:

Türkçe

Document ID (Org No.):

2000807411

Sıklık:

İki Aylık

eISSN:

1303-6173

pISSN:

1300-011X