Treatment of cosmetic industry wastewater with boron doped diamond, platinum and metal oxide electrodes in electrooxidation process

Orhan Taner Can; Hilal Gündoğdu; Pınar Sevim Elibol; Ahmet Aygün; Mehmet İşleyen

Makale detayları

Treatment of cosmetic industry wastewater with boron doped diamond, platinum and metal oxide electrodes in electrooxidation process

Yazarlar:

Orhan Taner Can | Hilal Gündoğdu | Pınar Sevim Elibol | Ahmet Aygün | Mehmet İşleyen

Yayıncı:

Pamukkale University

Ana Başlıklar:

Çevre Mühendisliği (Diğer)

Dergi:

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.30 Issue 1, pp.81-86

Belge Tipi:

Makale

Yayın Tarihi:

2/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001312586

pISSN:

2147-5881

Anahtar kelimeler:

Özet:

 In this study, treatability of cosmetic wastewater consist high pollution by electrooxidation process was investigated using three different anodes. For this purpose, BDD Boron Doped Diamond, Pt and RuO2-IrO2 metal-oxide electrodes were used. The total organic carbon TOC removal efficiency of each electrode was determined and results were compared. After 120 min of operating time, the TOC removal efficiencies of BDD anode were obtained as 31.6, 57.8 and 68; Pt anode were obtained as 25, 36.5 and 48; RuO2-IrO2 metal-oxide anode were obtained as 22.6, 29.8 and 42.6 respectively for 0.5, 1 and 1.5 ampere currents. It is observed that TOC removal efficiency increases with time for all electrodes throughout the operation time. The results showed that BDD electrode provided the best removal efficiency and this efficiency increased by the time of progress. After 120 min of operating time, the best TOC removal efficiencies of BDD, Pt and RuO2-IrO2 metal-oxides electrodes were 68, 48 and 42.6 respectively for 1.5 ampere.

 In this study, treatability of cosmetic wastewater consist high pollution by electrooxidation process was investigated using three different anodes. For this purpose, BDD Boron Doped Diamond, Pt and RuO2-IrO2 metal-oxide electrodes were used. The total organic carbon TOC removal efficiency of each electrode was determined and results were compared. After 120 min of operating time, the TOC removal efficiencies of BDD anode were obtained as 31.6, 57.8 and 68; Pt anode were obtained as 25, 36.5 and 48; RuO2-IrO2 metal-oxide anode were obtained as 22.6, 29.8 and 42.6 respectively for 0.5, 1 and 1.5 ampere currents. It is observed that TOC removal efficiency increases with time for all electrodes throughout the operation time. The results showed that BDD electrode provided the best removal efficiency and this efficiency increased by the time of progress. After 120 min of operating time, the best TOC removal efficiencies of BDD, Pt and RuO2-IrO2 metal-oxides electrodes were 68, 48 and 42.6 respectively for 1.5 ampere.

 In this study, treatability of cosmetic wastewater consist high pollution by electrooxidation process was investigated using three different anodes. For this purpose, BDD Boron Doped Diamond, Pt and RuO2-IrO2 metal-oxide electrodes were used. The total organic carbon TOC removal efficiency of each electrode was determined and results were compared. After 120 min of operating time, the TOC removal efficiencies of BDD anode were obtained as 31.6, 57.8 and 68; Pt anode were obtained as 25, 36.5 and 48; RuO2-IrO2 metal-oxide anode were obtained as 22.6, 29.8 and 42.6 respectively for 0.5, 1 and 1.5 ampere currents. It is observed that TOC removal efficiency increases with time for all electrodes throughout the operation time. The results showed that BDD electrode provided the best removal efficiency and this efficiency increased by the time of progress. After 120 min of operating time, the best TOC removal efficiencies of BDD, Pt and RuO2-IrO2 metal-oxides electrodes were 68, 48 and 42.6 respectively for 1.5 ampere.

 Bu çalışmada, yüksek kirlilik içeriğine sahip kozmetik atıksuyunun elektroooksidasyon prosesi ile arıtılabilirliği 3 farklı anot kullanılarak araştırılmıştır. Bu amaçla BDD Boron Doped Diamond, Pt ve RuO2-IrO2 metal-oksit elektrotları kullanılmıştır. Her bir elektrodun toplam organik karbon TOK giderim verimleri tespit edilmiştir ve elde edilen veriler karşılaştırılmıştır. 120 dk.lık deney süresi sonunda TOK giderim verimleri 0.5, 1 ve 1.5 amper akımlar için sırasıyla BDD anot için 31.6, 57.8 ve 68; Pt anot için 25, 36.5 ve 48; RuO2-IrO2 metal-oksit anot için 22.6, 29.8 ve 42.6 olarak elde edilmiştir. Tüm elektrotlar için deney süresi boyunca TOK giderim verimlerinin zamanla arttığı belirlenmiştir. Deney setleri arasında BDD elektrotun en iyi giderim verimini sağladığı ve bu verimin zamanla arttığı görülmüştür. 120 dk.lık deney süresi sonunda 1.5 amper için, BDD, Pt ve RuO2-IrO2 metal-oksit elektrotlarının en iyi TOK giderim verimleri sırasıyla 68, 48 ve 42.6 idi.

Makale detayları

Treatment of cosmetic industry wastewater with boron doped diamond, platinum and metal oxide electrodes in electrooxidation process

Yazarlar:

Orhan Taner Can | Hilal Gündoğdu | Pınar Sevim Elibol | Ahmet Aygün | Mehmet İşleyen

Yayıncı:

Pamukkale University

Ana Başlıklar:

Çevre Mühendisliği (Diğer)

Dergi:

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.30 Issue 1, pp.81-86

Belge Tipi:

Makale

Yayın Tarihi:

2/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001312586

pISSN:

2147-5881

Cosmetic industry wastewater

Advance oxidation process

Electrooxidation

BDD electrodeKozmetik sanayi atıksuyu

İleri oksidasyon prosesi

Elektrooksidasyon

BDD elektrot

Sayı

Makale detayları

Yazarlar: Orhan Taner Can | Hilal Gündoğdu | Pınar Sevim Elibol | Ahmet Aygün | Mehmet İşleyen

Yayıncı: Pamukkale University

Ana Başlıklar: Çevre Mühendisliği (Diğer)

Dergi: Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.30 Issue 1, pp.81-86

Belge Tipi: Makale

Yayın Tarihi: 2/2024

Belge Dili: Türkçe

Document ID (Org No.): 2001312586

pISSN: 2147-5881

Sayı

Yazarlar:

Orhan Taner Can | Hilal Gündoğdu | Pınar Sevim Elibol | Ahmet Aygün | Mehmet İşleyen

Yayıncı:

Pamukkale University

Ana Başlıklar:

Çevre Mühendisliği (Diğer)

Dergi:

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi Vol.30 Issue 1, pp.81-86

Belge Tipi:

Makale

Yayın Tarihi:

2/2024

Belge Dili:

Türkçe

Document ID (Org No.):

2001312586

pISSN:

2147-5881