AN APPROACH OF PRODUCTION SMOOTHING FOR PRODUCTION SCHEDULING AND SEQUENCING IN MIXED-MODEL ASSEMBLY LINES

Havva KARABULUT; Nihal ERGİNEL

doi:https://doi.org/10.18038/btd-a.51034

Makale detayları

AN APPROACH OF PRODUCTION SMOOTHING FOR PRODUCTION SCHEDULING AND SEQUENCING IN MIXED-MODEL ASSEMBLY LINES

Yazarlar:

Havva KARABULUT | Nihal ERGİNEL

Yayıncı:

Eskisehir Technical University

Dergi:

Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering 2015 Vol.16 Issue 1, pp.1-14

Belge Tipi:

Makale

Yayın Tarihi:

8/2015

Belge Dili:

Türkçe

Document ID (Org No.):

2000417307

pISSN:

2667-4211

DOI:

https://doi.org/10.18038/btd-a.51034

Özet:

 


Mixed model assembly line is able to produce more than one product type at the same time. Mixed model assembly line can adapt to the varied small size batch production, not keep the inventory to the work in process through verity of product and can quickly response to the abrupt change of demand. Due to the mentioned attributes of mixed model assembly line, waiting/ accumulations in the work stationary. For solving this problem, the production smoothing model are presented. The smoothing production aims to reduce the size of batch and flow as a unique products/ parts/ raw materials throughout the whole system. 

 In this study, the solution of models that response to demand for certain time at “just in time” according to the JIT approach and “no stock” according to the Lean philosophy in mixed model assemble line in automotive firm. The problem is handled for 50 product with two approach as scheduling and sequencing. In scheduling stage, three solving methods are presented and alternative solutions are obtained for balanced production desired from firm and considering constraints. This solutions are compared with several criteria. In sequencing stage, the work sequence of automobile models in assemble line is determined with modified Goal Chasing method.

.

 

Karma model montaj hatları, aynı anda iki ya da daha fazla ürün tipinin aynı hat üzerindeüretilebildiği, çeşitlendirilmiş küçük parti üretimine yatkın ve modellerin çeşitliliğine rağmen fazla stokbulundurmadan, ani talep değişikliklerine hızlı cevap verebilen montaj hatlarıdır. Bahsedilen buözelliklerinden dolayı, iş istasyonlarında beklemeler/ yığılmalar söz konusu olmaktadır. Bu problemeçözüm olarak, üretim düzgünleştirme modelleri önerilmektedir. Üretim düzgünleştirme, partibüyüklüklerini azaltmayı ve tüm sistem boyunca ürünlerin/ parçaların/ malzemelerin düzeltilmiş tekparça akışını oluşturmasını amaçlar.

Makale detayları

AN APPROACH OF PRODUCTION SMOOTHING FOR PRODUCTION SCHEDULING AND SEQUENCING IN MIXED-MODEL ASSEMBLY LINES

Yazarlar: Havva KARABULUT | Nihal ERGİNEL

Yayıncı: Eskisehir Technical University

Dergi: Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering 2015 Vol.16 Issue 1, pp.1-14

Belge Tipi: Makale

Yayın Tarihi: 8/2015

Belge Dili: Türkçe

Document ID (Org No.): 2000417307

pISSN: 2667-4211

DOI: https://doi.org/10.18038/btd-a.51034

Sayı

Yazarlar:

Havva KARABULUT | Nihal ERGİNEL

Yayıncı:

Eskisehir Technical University

Dergi:

Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering 2015 Vol.16 Issue 1, pp.1-14

Belge Tipi:

Makale

Yayın Tarihi:

8/2015

Belge Dili:

Türkçe

Document ID (Org No.):

2000417307

pISSN:

2667-4211

DOI:

https://doi.org/10.18038/btd-a.51034