The use of FPGA in field-oriented control of an induction machine

Özkan AKIN; İrfan ALAN

Makale detayları

The use of FPGA in field-oriented control of an induction machine

Yazarlar:

Özkan AKIN | İrfan ALAN

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2010 Vol.18 Issue 6, pp.943-962

Belge Tipi:

Makale

Yayın Tarihi:

5/2010

Belge Dili:

Türkçe

Document ID (Org No.):

2000743837

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632

Özet:

 

In this study, the feasibility of embedding the field  oriented control (FOC) of an induction machine into field programmable  gate arrays (FPGA) is investigated.  An indirect FOC of an induction  machine is simulated in a Matlab Simulink environment using a Xilinx  System Generator implemented in a Xilinx Spartan-3 XC3S200 FPGA board.  Design of the developed controller for the induction machine is  simulated via a Simulink full digital platform.  The resulting design  has a flexible and modular structure where the designer can customize  the hardware blocks by changing the number of inputs, outputs, and  algorithm when it is compared to the designs implemented using  classical microcontrollers and digital signal processors.  With its  flexibility, other control algorithms can easily be programmed and  embedded into the FPGA.    The controller developed can be imbedded and implemented on the Digilab S3   Spartan-3 XC3S200 FPGA development board produced by the Digilent Company.   Performance of the developed system has been tested at different load   torques and various induction machine speeds.

 

In this study, the feasibility of embedding the field  oriented control (FOC) of an induction machine into field programmable  gate arrays (FPGA) is investigated.  An indirect FOC of an induction  machine is simulated in a Matlab Simulink environment using a Xilinx  System Generator implemented in a Xilinx Spartan-3 XC3S200 FPGA board.  Design of the developed controller for the induction machine is  simulated via a Simulink full digital platform.  The resulting design  has a flexible and modular structure where the designer can customize  the hardware blocks by changing the number of inputs, outputs, and  algorithm when it is compared to the designs implemented using  classical microcontrollers and digital signal processors.  With its  flexibility, other control algorithms can easily be programmed and  embedded into the FPGA.    The controller developed can be imbedded and implemented on the Digilab S3   Spartan-3 XC3S200 FPGA development board produced by the Digilent Company.   Performance of the developed system has been tested at different load   torques and various induction machine speeds.

Makale detayları

The use of FPGA in field-oriented control of an induction machine

Yazarlar: Özkan AKIN | İrfan ALAN

Yayıncı: TUBITAK

Dergi: Turkish Journal of Electrical Engineering and Computer Science 2010 Vol.18 Issue 6, pp.943-962

Belge Tipi: Makale

Yayın Tarihi: 5/2010

Belge Dili: Türkçe

Document ID (Org No.): 2000743837

Sıklık: İki Aylık

eISSN: 1303-6203

pISSN: 1300-0632

Sayı

Yazarlar:

Özkan AKIN | İrfan ALAN

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2010 Vol.18 Issue 6, pp.943-962

Belge Tipi:

Makale

Yayın Tarihi:

5/2010

Belge Dili:

Türkçe

Document ID (Org No.):

2000743837

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632