Numerical Investigation of Furniture Arrangement, Airflow Velocity, and Blowing Angle with a Wall-Mounted Air Conditioner

Alparslan Şanlı; Hüsamettin Tan; Tolga Demircan

Makale detayları

Numerical Investigation of Furniture Arrangement, Airflow Velocity, and Blowing Angle with a Wall-Mounted Air Conditioner

Yazarlar:

Alparslan Şanlı | Hüsamettin Tan | Tolga Demircan

Yayıncı:

Afyon Kocatepe University

Ana Başlıklar:

Makine Mühendisliği (Diğer)

Dergi:

Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi Vol.25 Issue 5, pp.1216-1229

Belge Tipi:

Makale

Yayın Tarihi:

1/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001358485

pISSN:

2149-3367

Anahtar kelimeler:

Özet:

 In this study, the cooling of a room using a wall-mounted air conditioner and keeping it under thermal comfort conditions are discussed. Within this scope, a standard office room model cooled by air conditioning was created and numerical analyses were conducted. In the study, four different blowing velocities, three different blowing angles and two different placements of the furniture in the room were investigated. The effects of these parameters on the velocity and temperature distribution of the air in the room, which influences thermal comfort conditions, were examined. As a result of the analysis, it was observed that the change in the blowing velocity of the air conditioner does not have much effect on the overall structure of the flow. However, it was determined that changes in the air conditioners blowing angle and the rooms layout significantly affected the velocity and temperature distribution of the air in the room. Within the range of parameters examined, it was observed that the optimum thermal comfort conditions were achieved with furniture Location-I, a blowing velocity of 0.5 ms, and a blowing angle of 80.

 In this study, the cooling of a room using a wall-mounted air conditioner and keeping it under thermal comfort conditions are discussed. Within this scope, a standard office room model cooled by air conditioning was created and numerical analyses were conducted. In the study, four different blowing velocities, three different blowing angles and two different placements of the furniture in the room were investigated. The effects of these parameters on the velocity and temperature distribution of the air in the room, which influences thermal comfort conditions, were examined. As a result of the analysis, it was observed that the change in the blowing velocity of the air conditioner does not have much effect on the overall structure of the flow. However, it was determined that changes in the air conditioners blowing angle and the rooms layout significantly affected the velocity and temperature distribution of the air in the room. Within the range of parameters examined, it was observed that the optimum thermal comfort conditions were achieved with furniture Location-I, a blowing velocity of 0.5 ms, and a blowing angle of 80.

 In this study, the cooling of a room using a wall-mounted air conditioner and keeping it under thermal comfort conditions are discussed. Within this scope, a standard office room model cooled by air conditioning was created and numerical analyses were conducted. In the study, four different blowing velocities, three different blowing angles and two different placements of the furniture in the room were investigated. The effects of these parameters on the velocity and temperature distribution of the air in the room, which influences thermal comfort conditions, were examined. As a result of the analysis, it was observed that the change in the blowing velocity of the air conditioner does not have much effect on the overall structure of the flow. However, it was determined that changes in the air conditioners blowing angle and the rooms layout significantly affected the velocity and temperature distribution of the air in the room. Within the range of parameters examined, it was observed that the optimum thermal comfort conditions were achieved with furniture Location-I, a blowing velocity of 0.5 ms, and a blowing angle of 80.

 Bu çalışmada, duvar tipi bir klima kullanılan bir odanın soğutulması ve ısıl konfor şartlarında tutulması ele alınmıştır. Bu kapsamda klima ile soğutulan standart bir ofis odası modeli oluşturulmuş ve sayısal analizler yapılmıştır. Çalışmada dört farklı üfleme hızı, üç farklı üfleme açısı ve oda içerisindeki mobilyaların iki farklı yerleşimi için incelemeler yapılmıştır. Bu parametrelerin ısıl konfor şartlarına etki eden oda içerisindeki havanın hız ve sıcaklık dağılımına etkileri incelenmiştir. Yapılan analizlerin sonucunda, klimanın üfleme hızının değişiminin akışın genel yapısı üzerinde fazla etkili olmadığı gözlemlenmiştir. Ancak klimanın üfleme açısının ve odanın yerleşim düzeninin değişiminin akış yapısını değiştirdiği, oda içerisindeki havanın hız ve sıcaklık dağılımını önemli ölçüde etkilediği belirlenmiştir. İncelenen parametre aralığında, 1 numaralı mobilya yerleşimi, 0.5 ms üfleme hızı ve 80o üfleme açısı için optimum ısıl konfor şartlarının gerçekleştiği gözlemlenmiştir.

Makale detayları

Numerical Investigation of Furniture Arrangement, Airflow Velocity, and Blowing Angle with a Wall-Mounted Air Conditioner

Yazarlar:

Alparslan Şanlı | Hüsamettin Tan | Tolga Demircan

Yayıncı:

Afyon Kocatepe University

Ana Başlıklar:

Makine Mühendisliği (Diğer)

Dergi:

Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi Vol.25 Issue 5, pp.1216-1229

Belge Tipi:

Makale

Yayın Tarihi:

1/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001358485

pISSN:

2149-3367

Air Condition

Cfd

Thermal Comfort

Room DesignKlima

Had

Isıl Konfor

Oda Tasarımı

Sayı

Makale detayları

Yazarlar: Alparslan Şanlı | Hüsamettin Tan | Tolga Demircan

Yayıncı: Afyon Kocatepe University

Ana Başlıklar: Makine Mühendisliği (Diğer)

Dergi: Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi Vol.25 Issue 5, pp.1216-1229

Belge Tipi: Makale

Yayın Tarihi: 1/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001358485

pISSN: 2149-3367

Sayı

Yazarlar:

Alparslan Şanlı | Hüsamettin Tan | Tolga Demircan

Yayıncı:

Afyon Kocatepe University

Ana Başlıklar:

Makine Mühendisliği (Diğer)

Dergi:

Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi Vol.25 Issue 5, pp.1216-1229

Belge Tipi:

Makale

Yayın Tarihi:

1/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001358485

pISSN:

2149-3367