Effects of water-soluble varnishes on red color tone in wood material colored with water-soluble wood stains

Ahmet Yalınkılıç; Abdullah Sönmez

Makale detayları

Effects of water-soluble varnishes on red color tone in wood material colored with water-soluble wood stains

Yazarlar:

Ahmet Yalınkılıç | Abdullah Sönmez

Yayıncı:

Isparta University of Applied Sciences

Dergi:

Turkish Journal of Forestry 2015 Vol.16 Issue 2, pp.152-158

Belge Tipi:

Makale

Yayın Tarihi:

11/2015

Belge Dili:

İngilizce

Document ID (Org No.):

2000712423

Sıklık:

Üç Aylık

eISSN:

2149-3898

Özet:

 

In this study, changing effect of water-soluble varnishes on red color tone in different wood materials which were colored with water-soluble wood stains in brown tone has been researched. For this purpose, samples which were prepared from the Oriental beech (Fagus orientalis L.), Sessile oak (Quercus petreae L.) and Scots pine (Pinus sylvestris L.) woods in accordance with TS 53 and TS 2470, after being colored with aniline, ready-mix and chemical stains according to ASTM-E 1347-97, were coated with one-component and two-component waterborne varnishes according to ASTM-D 3023. Color changes were determined in accordance with ASTM 2244. According to research results, the highest color change in red color tone was obtained on oak wood colored with ready-mix stain and after coated with one-component waterborne varnishes; and the lowest change was obtained on Scots pine wood colored with chemical stain and after coated with two-component varnishes. 
Keywords: Red color tone, Waterborne varnishes, Water-soluble stains, Wood material.

 

In this study, changing effect of water-soluble varnishes on red color tone in different wood materials which were colored with water-soluble wood stains in brown tone has been researched. For this purpose, samples which were prepared from the Oriental beech (Fagus orientalis L.), Sessile oak (Quercus petreae L.) and Scots pine (Pinus sylvestris L.) woods in accordance with TS 53 and TS 2470, after being colored with aniline, ready-mix and chemical stains according to ASTM-E 1347-97, were coated with one-component and two-component waterborne varnishes according to ASTM-D 3023. Color changes were determined in accordance with ASTM 2244. According to research results, the highest color change in red color tone was obtained on oak wood colored with ready-mix stain and after coated with one-component waterborne varnishes; and the lowest change was obtained on Scots pine wood colored with chemical stain and after coated with two-component varnishes. 
Keywords: Red color tone, Waterborne varnishes, Water-soluble stains, Wood material.

Makale detayları

Effects of water-soluble varnishes on red color tone in wood material colored with water-soluble wood stains

Yazarlar: Ahmet Yalınkılıç | Abdullah Sönmez

Yayıncı: Isparta University of Applied Sciences

Dergi: Turkish Journal of Forestry 2015 Vol.16 Issue 2, pp.152-158

Belge Tipi: Makale

Yayın Tarihi: 11/2015

Belge Dili: İngilizce

Document ID (Org No.): 2000712423

Sıklık: Üç Aylık

eISSN: 2149-3898

Sayı

Yazarlar:

Ahmet Yalınkılıç | Abdullah Sönmez

Yayıncı:

Isparta University of Applied Sciences

Dergi:

Turkish Journal of Forestry 2015 Vol.16 Issue 2, pp.152-158

Belge Tipi:

Makale

Yayın Tarihi:

11/2015

Belge Dili:

İngilizce

Document ID (Org No.):

2000712423

Sıklık:

Üç Aylık

eISSN:

2149-3898