Investigation of The Effect of Cr2O3 Particles on Al-Si Matrix Composites Produced by Powder Metallurgy

Serkan Özel; Kübra Aslan

Makale detayları

Investigation of The Effect of Cr2O3 Particles on Al-Si Matrix Composites Produced by Powder Metallurgy

Yazarlar:

Serkan Özel | Kübra Aslan

Yayıncı:

Bitlis Eren University

Ana Başlıklar:

Engineering

Dergi:

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.12 Issue 2, pp.387-395

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292726

pISSN:

2147-3129

Anahtar kelimeler:

Özet:

 Metal matrix composite materials can be produced by powder metallurgy method. In this study, composite material with Al12wtSi matrix was produced by powder metallurgy PM method. Al12wtSi powder was mixed by adding 5wt, 10wt and 15wt Cr2O3 powder. Al12wtSi  Cr2O3 mixture powders were pressed unidirectional with 500MPa pressure in a cylindrical mold and sintered at 500 ºC. After sintering, optical microstructure, Scanning Electron Microscope SEM, Energy Dispersive Spectrometer EDS and microhardness analyzes of the samples were made. When the results were examined, it was observed that a porous structure was formed in all of the samples. Moreover, the lowest amount of microhardness was measured in the sample added 15wt Cr2O3 powder sintered at 500 ºC.

 Metal matrix composite materials can be produced by powder metallurgy method. In this study, composite material with Al12wtSi matrix was produced by powder metallurgy PM method. Al12wtSi powder was mixed by adding 5wt, 10wt and 15wt Cr2O3 powder. Al12wtSi  Cr2O3 mixture powders were pressed unidirectional with 500MPa pressure in a cylindrical mold and sintered at 500 ºC. After sintering, optical microstructure, Scanning Electron Microscope SEM, Energy Dispersive Spectrometer EDS and microhardness analyzes of the samples were made. When the results were examined, it was observed that a porous structure was formed in all of the samples. Moreover, the lowest amount of microhardness was measured in the sample added 15wt Cr2O3 powder sintered at 500 ºC.

 Metal matrix composite materials can be produced by powder metallurgy method. In this study, composite material with Al12wtSi matrix was produced by powder metallurgy PM method. Al12wtSi powder was mixed by adding 5wt, 10wt and 15wt Cr2O3 powder. Al12wtSi  Cr2O3 mixture powders were pressed unidirectional with 500MPa pressure in a cylindrical mold and sintered at 500 ºC. After sintering, optical microstructure, Scanning Electron Microscope SEM, Energy Dispersive Spectrometer EDS and microhardness analyzes of the samples were made. When the results were examined, it was observed that a porous structure was formed in all of the samples. Moreover, the lowest amount of microhardness was measured in the sample added 15wt Cr2O3 powder sintered at 500 ºC.

 Metal matrix composite materials can be produced by powder metallurgy method. In this study, composite material with Al12wtSi matrix was produced by powder metallurgy PM method. Al12wtSi powder was mixed by adding 5wt, 10wt and 15wt Cr2O3 powder. Al12wtSi  Cr2O3 mixture powders were pressed unidirectional with 500MPa pressure in a cylindrical mold and sintered at 500 ºC. After sintering, optical microstructure, Scanning Electron Microscope SEM, Energy Dispersive Spectrometer EDS and microhardness analyzes of the samples were made. When the results were examined, it was observed that a porous structure was formed in all of the samples. Moreover, the lowest amount of microhardness was measured in the sample added 15wt Cr2O3 powder sintered at 500 ºC.

Makale detayları

Investigation of The Effect of Cr2O3 Particles on Al-Si Matrix Composites Produced by Powder Metallurgy

Yazarlar:

Serkan Özel | Kübra Aslan

Yayıncı:

Bitlis Eren University

Ana Başlıklar:

Engineering

Dergi:

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.12 Issue 2, pp.387-395

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292726

pISSN:

2147-3129

Powder Metallurgy

Composite materials

Al

Cr2O3

Microstructure.Powder Metallurgy

Composite materials

Al

Cr2O3

Microstructure.

Sayı

Makale detayları

Yazarlar: Serkan Özel | Kübra Aslan

Yayıncı: Bitlis Eren University

Ana Başlıklar: Engineering

Dergi: Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.12 Issue 2, pp.387-395

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001292726

pISSN: 2147-3129

Sayı

Yazarlar:

Serkan Özel | Kübra Aslan

Yayıncı:

Bitlis Eren University

Ana Başlıklar:

Engineering

Dergi:

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi Vol.12 Issue 2, pp.387-395

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292726

pISSN:

2147-3129