Geometric Characterization of Three-Dimensional (3D) Woven Jute Fiber Preforms for Composites

Nesrin ŞAHBAZ KARADUMAN

doi:https://doi.org/10.18466/cbayarfbe.826090

Makale detayları

Geometric Characterization of Three-Dimensional (3D) Woven Jute Fiber Preforms for Composites

Yazarlar:

Nesrin ŞAHBAZ KARADUMAN

Yayıncı:

Celal Bayar University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Celal Bayar University Journal of Science 2021 Vol.17 Issue 2, pp.121-128

Belge Tipi:

Makale

Yayın Tarihi:

6/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000705718

Sıklık:

Üç Aylık

eISSN:

1305-1385

pISSN:

1305-130X

DOI:

https://doi.org/10.18466/cbayarfbe.826090

Özet:

 

Fiber-reinforced composite materials have many advantages in various engineering applications when compared to traditional materials such as glass, metals, ceramics and unreinforced plastics. Recently, textile-reinforced composites are increasingly used in various industries including aerospace, construction and automotive. This study aims to investigate the geometric characteristics of three-dimensional (3D) woven preforms which are used as reinforcement materials in composites. To this end, 3D woven preforms with three different weave types were produced namely 3D orthogonal, 3D plain z-orthogonal and 3D satin z-orthogonal. The effect of weave pattern and the number of layers on the geometric characteristics of the produced fabrics was investigated. For this purpose, yarn-yarn distances and density, yarn lengths and yarn angles were measured. The effect of the number of layers on the geometric parameters was limited. Yarn-to-yarn distances in plain-weave fabrics were found to be greater when compared to other types of fabrics whereas the yarn density decreased in plain woven fabrics due to a large number of interlacements. This shows that in composite form, the fiber volume fraction in the filling and z-directions will be lower in the semi-interlaced fabrics when compared to the non-interlaced orthogonal structures. It was also shown that filling and warp angles are a function of weave type while z yarn angle is associated with the weaving operations such as beat-up, multi-layer filling insertion and warp yarn let off.

Makale detayları

Geometric Characterization of Three-Dimensional (3D) Woven Jute Fiber Preforms for Composites

Yazarlar: Nesrin ŞAHBAZ KARADUMAN

Yayıncı: Celal Bayar University

Ana Başlıklar: Uygulamalı fizik

Dergi: Celal Bayar University Journal of Science 2021 Vol.17 Issue 2, pp.121-128

Belge Tipi: Makale

Yayın Tarihi: 6/2021

Belge Dili: İngilizce

Document ID (Org No.): 2000705718

Sıklık: Üç Aylık

eISSN: 1305-1385

pISSN: 1305-130X

DOI: https://doi.org/10.18466/cbayarfbe.826090

Sayı

Yazarlar:

Nesrin ŞAHBAZ KARADUMAN

Yayıncı:

Celal Bayar University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Celal Bayar University Journal of Science 2021 Vol.17 Issue 2, pp.121-128

Belge Tipi:

Makale

Yayın Tarihi:

6/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000705718

Sıklık:

Üç Aylık

eISSN:

1305-1385

pISSN:

1305-130X

DOI:

https://doi.org/10.18466/cbayarfbe.826090