Investigation of Power Consumption in the Machining of S960QL Steel by Finite Elements Method

Rüstem BİNALİ; Süleyman YALDIZ; Süleyman NEŞELİ

doi:https://doi.org/10.36222/ejt.1066472

Makale detayları

Investigation of Power Consumption in the Machining of S960QL Steel by Finite Elements Method

Yazarlar:

Rüstem BİNALİ | Süleyman YALDIZ | Süleyman NEŞELİ

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2022 Vol.12 Issue 1, pp.43-48

Belge Tipi:

Makale

Yayın Tarihi:

6/2022

Belge Dili:

İngilizce

Document ID (Org No.):

2000425406

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.1066472

Özet:

 

Armor steels have good strength and corrosion resistance; however, due to their difficult machinability, high power consumption occurs. High power consumption increases the cost in machinability studies. Therefore, minimizing power consumption is important for sustainable and cleaner production. In order to minimize power consumption during machining, factors such as workpiece material, cutting tool material and geometry, machining conditions and cutting parameters must be compatible with each other. For this reason, power consumption modeling was carried out in the milling of S960QL structural steel material according to the finite elements method, depending on the cutting parameters. In this context, simulation processes were carried out at three levels for each factor: cutting speed, lateral depth, axial depth and feed rate. The most effective parameter in power consumption was the axial deep of cut. There was a 476% change between the highest and lowest power consumption. It is concluded that finite element modeling is feasible in order to determine the effect of processing parameters on power consumption.

Makale detayları

Investigation of Power Consumption in the Machining of S960QL Steel by Finite Elements Method

Yazarlar: Rüstem BİNALİ | Süleyman YALDIZ | Süleyman NEŞELİ

Yayıncı: Hibetullah KILIÇ

Ana Başlıklar: Diğer mühendislik dalları

Dergi: European Journal of Technique (EJT) 2022 Vol.12 Issue 1, pp.43-48

Belge Tipi: Makale

Yayın Tarihi: 6/2022

Belge Dili: İngilizce

Document ID (Org No.): 2000425406

eISSN: 2536-5134

pISSN: 2536-5010

DOI: https://doi.org/10.36222/ejt.1066472

Sayı

Yazarlar:

Rüstem BİNALİ | Süleyman YALDIZ | Süleyman NEŞELİ

Yayıncı:

Hibetullah KILIÇ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

European Journal of Technique (EJT) 2022 Vol.12 Issue 1, pp.43-48

Belge Tipi:

Makale

Yayın Tarihi:

6/2022

Belge Dili:

İngilizce

Document ID (Org No.):

2000425406

eISSN:

2536-5134

pISSN:

2536-5010

DOI:

https://doi.org/10.36222/ejt.1066472