Investigation of Machinability of Aluminum (Al1070) Matrix, Silicon Carbide (SiC) and Boron Carbide (B4C) Reinforced Hybrid Composite Materials

Yunus Kartal; Ali Osman Er

Makale detayları

Investigation of Machinability of Aluminum (Al1070) Matrix, Silicon Carbide (SiC) and Boron Carbide (B4C) Reinforced Hybrid Composite Materials

Yazarlar:

Yunus Kartal | Ali Osman Er

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.16 Issue 1, pp.47-55

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001310730

pISSN:

1308-5506

Anahtar kelimeler:

Özet:

 In this study, the machinability of hybrid metal matrix composite MMC materials were investigated. Experiments were carried out on a CNC lathe using aluminium 1070 matrix SiC and B4C reinforced MMC materials without cooling fluid. The effect of cutting parameters and MMC reinforcement ratios on working has been examined. It has been tried to determine the optimum reinforcement ratio and cutting parameters in the machining process of hybrid reinforced MMC materials. As a result of this study, it was tried to contribute to the industrial area by determining the most suitable cutting parameters for Al1070 matrix SiC and B4C hybrid reinforced MMC materials.

 In this study, the machinability of hybrid metal matrix composite MMC materials were investigated. Experiments were carried out on a CNC lathe using aluminium 1070 matrix SiC and B4C reinforced MMC materials without cooling fluid. The effect of cutting parameters and MMC reinforcement ratios on working has been examined. It has been tried to determine the optimum reinforcement ratio and cutting parameters in the machining process of hybrid reinforced MMC materials. As a result of this study, it was tried to contribute to the industrial area by determining the most suitable cutting parameters for Al1070 matrix SiC and B4C hybrid reinforced MMC materials.

 In this study, the machinability of hybrid metal matrix composite MMC materials were investigated. Experiments were carried out on a CNC lathe using aluminium 1070 matrix SiC and B4C reinforced MMC materials without cooling fluid. The effect of cutting parameters and MMC reinforcement ratios on working has been examined. It has been tried to determine the optimum reinforcement ratio and cutting parameters in the machining process of hybrid reinforced MMC materials. As a result of this study, it was tried to contribute to the industrial area by determining the most suitable cutting parameters for Al1070 matrix SiC and B4C hybrid reinforced MMC materials.

 Bu çalışmada hibrit metal matrisli kompozit MMK malzemelerin işlenebilirliği incelenmiştir. Çalışma kesme sıvısının kullanılmadığı atmosferde gerçekleştirilmiş ve alüminyum 1070 matris SiC ve B4C takviyeli MMC malzemeleri kullanılarak, CNC tornalama tezgahında gerçekleştirilmiştir. Çalışmada hibrit takviyeli MMK malzemelerin talaşlı imalat sürecinde optimum takviye oranı ve kesme parametreleri belirlenmeye çalışılmıştır. Buna ek olarak kesme parametrelerinin ve MMK malzemesi takviye oranlarının işlenebilirliğe etkisi incelenmiştir. Bu çalışma sonucunda Al1070 matrisli SiC ve B4C hybrid takviyeli MMK malzemeleri için en uygun kesme parametreleri belirlenerek endüstriyel alana katkı sağlanmaya çalışılmıştır.

Makale detayları

Investigation of Machinability of Aluminum (Al1070) Matrix, Silicon Carbide (SiC) and Boron Carbide (B4C) Reinforced Hybrid Composite Materials

Yazarlar:

Yunus Kartal | Ali Osman Er

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.16 Issue 1, pp.47-55

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001310730

pISSN:

1308-5506

Hybrid MMC

Machinability

Hardness

Cutting force

Roughness

Turning.Hibrit MMK

İşlenebilirlik

Sertlik

Kesme kuvveti

Pürüzlülük

Tornalama

Sayı

Makale detayları

Yazarlar: Yunus Kartal | Ali Osman Er

Yayıncı: Kirikkale University

Ana Başlıklar: Mechanical Engineering

Dergi: International Journal of Engineering Research and Development Vol.16 Issue 1, pp.47-55

Belge Tipi: Makale

Yayın Tarihi: 1/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001310730

pISSN: 1308-5506

Sayı

Yazarlar:

Yunus Kartal | Ali Osman Er

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mechanical Engineering

Dergi:

International Journal of Engineering Research and Development Vol.16 Issue 1, pp.47-55

Belge Tipi:

Makale

Yayın Tarihi:

1/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001310730

pISSN:

1308-5506