A real-time extraction of active and reactive current using microcontrollers for a multipulse STATCOM

Mehmet Ali ANADOL; Musa AYDIN; Tankut YALÇINÖZ

Makale detayları

A real-time extraction of active and reactive current using microcontrollers for a multipulse STATCOM

Yazarlar:

Mehmet Ali ANADOL | Musa AYDIN | Tankut YALÇINÖZ

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2013 Vol.21 Issue 4, pp.1044-1060

Belge Tipi:

Makale

Yayın Tarihi:

3/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000743262

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632

Özet:

 

In power transmission and distribution systems, the design  of a compensator that adjusts the power factor without causing  additional power losses requires the determination of the reactive  current components that are going to be supplied into the system.  In  this study, the determination of the active and reactive current  components is achieved via the use of the nonactive power theory and a  microcontroller-based control system.  The control system has been  implemented with low-cost 16-bit microcontrollers.  This system was  used to control a 3-phase, 12-pulse laboratory-size prototype of a  static synchronous compensator (STATCOM) with the structure of a  voltage source converter.  Verification of the STATCOM and its control  circuit were examined via experiments and simulation studies conducted  on a single-machine infinite-bus power transmission system.  The  simulation models for the power and control systems were built by  employing the PSCAD/EMTDC program's C programming interface and the  graphics-based models in its model library.  The experimental results  are compared with the results obtained from the PSCAD/EMTDC simulation  program.

 

In power transmission and distribution systems, the design  of a compensator that adjusts the power factor without causing  additional power losses requires the determination of the reactive  current components that are going to be supplied into the system.  In  this study, the determination of the active and reactive current  components is achieved via the use of the nonactive power theory and a  microcontroller-based control system.  The control system has been  implemented with low-cost 16-bit microcontrollers.  This system was  used to control a 3-phase, 12-pulse laboratory-size prototype of a  static synchronous compensator (STATCOM) with the structure of a  voltage source converter.  Verification of the STATCOM and its control  circuit were examined via experiments and simulation studies conducted  on a single-machine infinite-bus power transmission system.  The  simulation models for the power and control systems were built by  employing the PSCAD/EMTDC program's C programming interface and the  graphics-based models in its model library.  The experimental results  are compared with the results obtained from the PSCAD/EMTDC simulation  program.

Makale detayları

A real-time extraction of active and reactive current using microcontrollers for a multipulse STATCOM

Yazarlar: Mehmet Ali ANADOL | Musa AYDIN | Tankut YALÇINÖZ

Yayıncı: TUBITAK

Dergi: Turkish Journal of Electrical Engineering and Computer Science 2013 Vol.21 Issue 4, pp.1044-1060

Belge Tipi: Makale

Yayın Tarihi: 3/2013

Belge Dili: Türkçe

Document ID (Org No.): 2000743262

Sıklık: İki Aylık

eISSN: 1303-6203

pISSN: 1300-0632

Sayı

Yazarlar:

Mehmet Ali ANADOL | Musa AYDIN | Tankut YALÇINÖZ

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2013 Vol.21 Issue 4, pp.1044-1060

Belge Tipi:

Makale

Yayın Tarihi:

3/2013

Belge Dili:

Türkçe

Document ID (Org No.):

2000743262

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632