FFC Seramik Sağlık Gereçlerinin Yarı Mamül ve Pişmiş Mamul Mukavemetlerini Arttırarak Ultra İnce FFC Lavaboların Üretimi

Nazım KUNDURACI; Tuna AYDIN

Makale detayları

FFC Seramik Sağlık Gereçlerinin Yarı Mamül ve Pişmiş Mamul Mukavemetlerini Arttırarak Ultra İnce FFC Lavaboların Üretimi

Yazarlar:

Nazım KUNDURACI | Tuna AYDIN

Yayıncı:

Kirikkale University

Dergi:

International Journal of Engineering Research and Development 2015 Vol.7 Issue 2, pp.0-0

Belge Tipi:

Makale

Yayın Tarihi:

6/2015

Belge Dili:

Türkçe

Document ID (Org No.):

2000647874

Sıklık:

İki Yıllık

eISSN:

1308-5514

Özet:

 


Large-sized products are casted by using FFC (fine fire clay) in ceramic sanitarywares production. Along with developing in the technology, high-pressure casting systems are increasingly common in forming processes. Depending on increasing in high-pressure systems, there is an increase in the use of FFC.  One of the main raw materials in FFC production is fireclay. In Turkish ceramic sanitaryware production, fireclay is used in ratio of 30 % wt. in receipts. However, fireclay is mostly imported from foreign country. Fireclay is composed of 50 % mullite, 5 % cristobalite, 5 % corundum and 40 % amorphous phase. As fireclay is a semi-finished and fired raw material, it provides strength for FFC bodies. The aim of this study is to develop materials, which provide more strength and lower cost for ceramic sanitarywares production and will be produced in Turkey, instead of fireclay. Thus, there will be able to provide increase in competitiveness with foreign manufacturers. Also, it is considered that this material will bring a significant amount of incomes with producing and exporting of this material. Now, lack of such a raw material in international market is important too.  

.

 



Large-sized products are casted by using FFC (fine 
fire clay) in ceramic sanitarywares production. Along with developing in
 the technology, high-pressure casting systems are increasingly common 
in forming processes. Depending on increasing in high-pressure systems, 
there is an increase in the use of FFC.  One of the main raw materials 
in FFC production is fireclay. In Turkish ceramic sanitaryware 
production, fireclay is used in ratio of 30 % wt. in receipts. However, 
fireclay is mostly imported from foreign country. Fireclay is composed 
of 50 % mullite, 5 % cristobalite, 5 % corundum and 40 % amorphous 
phase. As fireclay is a semi-finished and fired raw material, it 
provides strength for FFC bodies. The aim of this study is to develop 
materials, which provide more strength and lower cost for ceramic 
sanitarywares production and will be produced in Turkey, instead of 
fireclay. Thus, there will be able to provide increase in 
competitiveness with foreign manufacturers. Also, it is considered that 
this material will bring a significant amount of incomes with producing 
and exporting of this material. Now, lack of such a raw material in 
international market is important too.  


.

Makale detayları

FFC Seramik Sağlık Gereçlerinin Yarı Mamül ve Pişmiş Mamul Mukavemetlerini Arttırarak Ultra İnce FFC Lavaboların Üretimi

Yazarlar: Nazım KUNDURACI | Tuna AYDIN

Yayıncı: Kirikkale University

Dergi: International Journal of Engineering Research and Development 2015 Vol.7 Issue 2, pp.0-0

Belge Tipi: Makale

Yayın Tarihi: 6/2015

Belge Dili: Türkçe

Document ID (Org No.): 2000647874

Sıklık: İki Yıllık

eISSN: 1308-5514

Sayı

Yazarlar:

Nazım KUNDURACI | Tuna AYDIN

Yayıncı:

Kirikkale University

Dergi:

International Journal of Engineering Research and Development 2015 Vol.7 Issue 2, pp.0-0

Belge Tipi:

Makale

Yayın Tarihi:

6/2015

Belge Dili:

Türkçe

Document ID (Org No.):

2000647874

Sıklık:

İki Yıllık

eISSN:

1308-5514