Experimental testing of scroll machine driven by compressed air for power generation and its integration in small scale organic Rankine cycle

Pavan Kumar REDDY; M S BHAGYASHEKAR

doi:https://doi.org/10.18186/thermal.990826

Makale detayları

Experimental testing of scroll machine driven by compressed air for power generation and its integration in small scale organic Rankine cycle

Yazarlar:

Pavan Kumar REDDY | M S BHAGYASHEKAR

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Journal of Thermal Engineering 2021 Vol.7 Issue 6, pp.1457-1467

Belge Tipi:

Makale

Yayın Tarihi:

9/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000504994

Sıklık:

İki Aylık

eISSN:

2148-7847

DOI:

https://doi.org/10.18186/thermal.990826

Özet:

 

Organic Rankine Cycle (ORC) is a proven technology in the field of waste heat recovery and present days ORC is extensively being used in exploiting biomass, geothermal and solar energy. The overall performance of ORC depends on the expander, making it a core component of the system. Generally, these expanders are classified into velocity type and displacement type. The velocity type expanders find their applications in large scale power generation and are not preferred in small scale power applications as their rotational speeds exponentially increase with a decrease in expander power output. As a result, the displacement type expanders are best suited for small scale power generation in ORC. Yet, till date expanders capable of producing power at small scale are not commercially available in the market for ORC application. As an effect commercially available scroll compressors are modified to work as expanders in ORC systems. The present study aims to examine the feasibility of using one such scroll compressor as an expander in ORC with and without modification. A test rig was developed to test the compressor running in reverse as expander using compressed air, before and after modifications. The scroll machine was tested for operating conditions consisting of pressure varying from 0.5 bar to 4.5 bar and the load varying from 0.2 kg to 2.2 kg for a constant airflow rate. The configurations tested were, scroll compressor with the suction port as inlet, modified scroll compressor with the suction port as inlet and modified scroll compressor with discharge port as an inlet. Based on the experimental test data obtained it is observed that, in all three configurations, for various loading conditions at given inlet air pressure there exists a maximum power generation point and a further increase in the load at given pressure has a negative effect on power output. Also, a significant increase in speed is observed from 300 to 4250 rpm at no load condition with increasing inlet air pressures. Maximum power of 210 W was achieved at a load of 1.1 kg with the inlet pressure of 4.5 bar for modified scroll machine when the discharge port was used as an inlet. Finally, it is recommended to use a modified scroll machine with discharge port as inlet as it gives more power when compared with other configurations for the same operating conditions.

Makale detayları

Experimental testing of scroll machine driven by compressed air for power generation and its integration in small scale organic Rankine cycle

Yazarlar: Pavan Kumar REDDY | M S BHAGYASHEKAR

Yayıncı: Yildiz Technical University

Ana Başlıklar: Uygulamalı fizik

Dergi: Journal of Thermal Engineering 2021 Vol.7 Issue 6, pp.1457-1467

Belge Tipi: Makale

Yayın Tarihi: 9/2021

Belge Dili: İngilizce

Document ID (Org No.): 2000504994

Sıklık: İki Aylık

eISSN: 2148-7847

DOI: https://doi.org/10.18186/thermal.990826

Sayı

Yazarlar:

Pavan Kumar REDDY | M S BHAGYASHEKAR

Yayıncı:

Yildiz Technical University

Ana Başlıklar:

Uygulamalı fizik

Dergi:

Journal of Thermal Engineering 2021 Vol.7 Issue 6, pp.1457-1467

Belge Tipi:

Makale

Yayın Tarihi:

9/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000504994

Sıklık:

İki Aylık

eISSN:

2148-7847

DOI:

https://doi.org/10.18186/thermal.990826