Performance Analysis of Pressurized Irrigation Systems with COPAM Software: A Case of Burdur-Çavdır-Küçükalan

Can Özkaya; Yusuf Uçar

Makale detayları

Performance Analysis of Pressurized Irrigation Systems with COPAM Software: A Case of Burdur-Çavdır-Küçükalan

Yazarlar:

Can Özkaya | Yusuf Uçar

Yayıncı:

Isparta University of Applied Sciences

Ana Başlıklar:

Ziraat Mühendisliği

Dergi:

Ziraat Fakültesi Dergisi Vol.18 Issue 1, pp.50-58

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001291151

pISSN:

1304-9984

Anahtar kelimeler:

Özet:

 In this study, COPAM Classified Characteristic Curves Model computer software was used to analyze the performance of the Burdur Çavdır Küçükalan pressurized irrigation system. With the help of COPAM, analyses such as flow rate  water source elevation, detection of hydrants insufficient in terms of relative pressure, hydrant dependability, the sufficiency of hydrants at different water source elevations, re-calculation of pipe diameters in current conditions, comparison of old and new cost of the irrigation system according to calculated pipe diameters were made. At the end of the study, it was determined that the irrigation system could work with an efficiency of 90  under current conditions. In the study, it was also determined that 2 of the 42 hydrants in the system were insufficient in terms of relative pressure and their reliability values were -0-. In the evaluation made in terms of pipe diameters under current conditions, it was determined that while smaller diameter pipes should be used in 26 pipelines 6 818.50 m, larger diameter pipes should be used in 2 pipelines 491.40 m. In the case of using pipe diameters calculated with COPAM, hydrants numbers with relative pressure deficiency decreased to 1. In the cost analysis, it was determined that if the pipe diameters determined by the COPAM are used, 57 262.49  can be saved from the project cost. As a result, it has been concluded that the COPAM can be used in the performance analysis of pressurized irrigation systems. If COPAM or similar programs are used, it will be possible to increase the efficiency of the projects by reducing their investment costs. For this reason, it is thought that COPAM or similar programs should be used by relevant institutions for the evaluation of pressurized irrigation systems.

 In this study, COPAM Classified Characteristic Curves Model computer software was used to analyze the performance of the Burdur Çavdır Küçükalan pressurized irrigation system. With the help of COPAM, analyses such as flow rate  water source elevation, detection of hydrants insufficient in terms of relative pressure, hydrant dependability, the sufficiency of hydrants at different water source elevations, re-calculation of pipe diameters in current conditions, comparison of old and new cost of the irrigation system according to calculated pipe diameters were made. At the end of the study, it was determined that the irrigation system could work with an efficiency of 90  under current conditions. In the study, it was also determined that 2 of the 42 hydrants in the system were insufficient in terms of relative pressure and their reliability values were -0-. In the evaluation made in terms of pipe diameters under current conditions, it was determined that while smaller diameter pipes should be used in 26 pipelines 6 818.50 m, larger diameter pipes should be used in 2 pipelines 491.40 m. In the case of using pipe diameters calculated with COPAM, hydrants numbers with relative pressure deficiency decreased to 1. In the cost analysis, it was determined that if the pipe diameters determined by the COPAM are used, 57 262.49  can be saved from the project cost. As a result, it has been concluded that the COPAM can be used in the performance analysis of pressurized irrigation systems. If COPAM or similar programs are used, it will be possible to increase the efficiency of the projects by reducing their investment costs. For this reason, it is thought that COPAM or similar programs should be used by relevant institutions for the evaluation of pressurized irrigation systems.

 In this study, COPAM Classified Characteristic Curves Model computer software was used to analyze the performance of the Burdur Çavdır Küçükalan pressurized irrigation system. With the help of COPAM, analyses such as flow rate  water source elevation, detection of hydrants insufficient in terms of relative pressure, hydrant dependability, the sufficiency of hydrants at different water source elevations, re-calculation of pipe diameters in current conditions, comparison of old and new cost of the irrigation system according to calculated pipe diameters were made. At the end of the study, it was determined that the irrigation system could work with an efficiency of 90  under current conditions. In the study, it was also determined that 2 of the 42 hydrants in the system were insufficient in terms of relative pressure and their reliability values were -0-. In the evaluation made in terms of pipe diameters under current conditions, it was determined that while smaller diameter pipes should be used in 26 pipelines 6 818.50 m, larger diameter pipes should be used in 2 pipelines 491.40 m. In the case of using pipe diameters calculated with COPAM, hydrants numbers with relative pressure deficiency decreased to 1. In the cost analysis, it was determined that if the pipe diameters determined by the COPAM are used, 57 262.49  can be saved from the project cost. As a result, it has been concluded that the COPAM can be used in the performance analysis of pressurized irrigation systems. If COPAM or similar programs are used, it will be possible to increase the efficiency of the projects by reducing their investment costs. For this reason, it is thought that COPAM or similar programs should be used by relevant institutions for the evaluation of pressurized irrigation systems.

 Bu çalışmada, Burdur Çavdır Küçükalan basınçlı sulama sisteminin performans analizini yapmak için COPAM Sınıflandırılmış Karakteristik Eğriler Modeli bilgisayar yazılımı kullanılmıştır. Bu yazılım yardımıyla debi  su kaynağı kotu, bağıl basınç açısından yetersiz hidrantların tespiti, hidrant güvenilirliği, farklı kaynak yüksekliklerinde hidrantların yeterliliği, mevcut koşullarda boru çaplarının yeninden belirlenmesi, hesaplanan boru çaplarına göre sulama sisteminin eski ve yeni maliyetinin karşılaştırılması gibi analizler yapılmıştır. Çalışma sonunda, sulama sisteminin mevcut koşullarda 90lık bir verim ile çalışabileceği belirlenmiştir. Çalışmada ayrıca, sistemde bulunan 42 adet hidrantın 2sinde hem bağıl basınç açısından yetersizlik olduğu hem de güvenilirlik değerlerinin -0- olduğu saptanmıştır. Mevcut koşullarda boru çapları açısından yapılan değerlendirmede ise 26 boru hattında 6 815.50 m daha küçük çaplı borular kullanılması gerekirken 2 hatta 491.40 m ise daha büyük çaplı boruların kullanılması gerektiği saptanmıştır. COPAM yazılımıyla hesaplanan boru çaplarının kullanılması durumunda, bağıl basınç eksikliği olan hidrant sayısı 1e düşmüştür. Yapılan maliyet analizinde ise COPAM yazılımı ile belirlenen boru çaplarının kullanılması durumunda proje maliyetinden 57 262.49  tasarruf edilebileceği saptanmıştır. Sonuç olarak, basınçlı sulama sistemlerinin performans analizinde COPAM programının kullanılabileceği sonucuna ulaşılmıştır. COPAM veya benzeri programların kullanılması durumunda, projelerin yatırım maliyetlerini düşürerek verimliliklerini yükseltmek mümkün olabilecektir. Bu nedenle COPAM veya benzeri programların basınçlı sulama sistemlerinin değerlendirilmesi amacıyla ilgili kurumlar tarafından kullanılması gerektiği düşünülmektedir.

Makale detayları

Performance Analysis of Pressurized Irrigation Systems with COPAM Software: A Case of Burdur-Çavdır-Küçükalan

Yazarlar:

Can Özkaya | Yusuf Uçar

Yayıncı:

Isparta University of Applied Sciences

Ana Başlıklar:

Ziraat Mühendisliği

Dergi:

Ziraat Fakültesi Dergisi Vol.18 Issue 1, pp.50-58

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001291151

pISSN:

1304-9984

Burdur

Dependability

Hydrant analysis

Irrigation system cost analysis

Irrigation system performanceBurdur

Güvenilirlik

Hidrant analizi

Sulama sistemi maliyet analizi

Sulama sistem performansı

Sayı

Makale detayları

Yazarlar: Can Özkaya | Yusuf Uçar

Yayıncı: Isparta University of Applied Sciences

Ana Başlıklar: Ziraat Mühendisliği

Dergi: Ziraat Fakültesi Dergisi Vol.18 Issue 1, pp.50-58

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001291151

pISSN: 1304-9984

Sayı

Yazarlar:

Can Özkaya | Yusuf Uçar

Yayıncı:

Isparta University of Applied Sciences

Ana Başlıklar:

Ziraat Mühendisliği

Dergi:

Ziraat Fakültesi Dergisi Vol.18 Issue 1, pp.50-58

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001291151

pISSN:

1304-9984