Evaluation and characterization of orally disintegrating films loaded donepezil hydrochloride for Alzheimer’s disease

Oya Kerimoğlu

Makale detayları

Evaluation and characterization of orally disintegrating films loaded donepezil hydrochloride for Alzheimer’s disease

Yazarlar:

Oya Kerimoğlu

Yayıncı:

Marmara University

Ana Başlıklar:

Pharmaceutical Biotechnology

Dergi:

Journal of Research in Pharmacy Vol.27 Issue 2, pp.893-902

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001347849

pISSN:

2630-6344

Anahtar kelimeler:

Özet:

 Nowadays, innovative and more effective drug dosage forms continue to be researched and developed compared to traditional drug dosage forms. The importance of orally disintegrating films ODFs in current studies and advancements cannot be overstated. This study aims to create the optimum ODF formulations using pullulan and lycoat with donepezil hydrochloride donepezil HCl. Plasticizers such as polyethylene glycol 400 PEG-400 and glycerine were used to form flexible films. In the characterization studies of the films produced by the solvent casting technique: determination of morphology, determination of folding, determination of disintegration time, determination of thickness, determination of swelling, determination of pH, determination of mass uniformity, determination of In vitro release, and determination of content uniformity studies were carried out. According to the results obtained, the non- brittle, smooth-surfaced films were disintegrated in the mouth in an average of 35 seconds. Since the 10th minute, more than 85 of the active pharmaceutical ingredient API has been revealed. These values suggested that the pullulan polymer showed better film-forming capacity when used with lycoat polymer. Ultraviolet UV-visible spectrum studies were carried out to validate donepezil HCl. Thanks to the ODFs containing donepezil HCl, an effective and safe, innovative clinical use has been achieved in the treatment of diseases such as dementia and Alzheimer, which are characterized by a decrease in daily life activities and atrophy in cognitive abilities.

 Nowadays, innovative and more effective drug dosage forms continue to be researched and developed compared to traditional drug dosage forms. The importance of orally disintegrating films ODFs in current studies and advancements cannot be overstated. This study aims to create the optimum ODF formulations using pullulan and lycoat with donepezil hydrochloride donepezil HCl. Plasticizers such as polyethylene glycol 400 PEG-400 and glycerine were used to form flexible films. In the characterization studies of the films produced by the solvent casting technique: determination of morphology, determination of folding, determination of disintegration time, determination of thickness, determination of swelling, determination of pH, determination of mass uniformity, determination of In vitro release, and determination of content uniformity studies were carried out. According to the results obtained, the non- brittle, smooth-surfaced films were disintegrated in the mouth in an average of 35 seconds. Since the 10th minute, more than 85 of the active pharmaceutical ingredient API has been revealed. These values suggested that the pullulan polymer showed better film-forming capacity when used with lycoat polymer. Ultraviolet UV-visible spectrum studies were carried out to validate donepezil HCl. Thanks to the ODFs containing donepezil HCl, an effective and safe, innovative clinical use has been achieved in the treatment of diseases such as dementia and Alzheimer, which are characterized by a decrease in daily life activities and atrophy in cognitive abilities.

 Nowadays, innovative and more effective drug dosage forms continue to be researched and developed compared to traditional drug dosage forms. The importance of orally disintegrating films ODFs in current studies and advancements cannot be overstated. This study aims to create the optimum ODF formulations using pullulan and lycoat with donepezil hydrochloride donepezil HCl. Plasticizers such as polyethylene glycol 400 PEG-400 and glycerine were used to form flexible films. In the characterization studies of the films produced by the solvent casting technique: determination of morphology, determination of folding, determination of disintegration time, determination of thickness, determination of swelling, determination of pH, determination of mass uniformity, determination of In vitro release, and determination of content uniformity studies were carried out. According to the results obtained, the non- brittle, smooth-surfaced films were disintegrated in the mouth in an average of 35 seconds. Since the 10th minute, more than 85 of the active pharmaceutical ingredient API has been revealed. These values suggested that the pullulan polymer showed better film-forming capacity when used with lycoat polymer. Ultraviolet UV-visible spectrum studies were carried out to validate donepezil HCl. Thanks to the ODFs containing donepezil HCl, an effective and safe, innovative clinical use has been achieved in the treatment of diseases such as dementia and Alzheimer, which are characterized by a decrease in daily life activities and atrophy in cognitive abilities.

 Nowadays, innovative and more effective drug dosage forms continue to be researched and developed compared to traditional drug dosage forms. The importance of orally disintegrating films ODFs in current studies and advancements cannot be overstated. This study aims to create the optimum ODF formulations using pullulan and lycoat with donepezil hydrochloride donepezil HCl. Plasticizers such as polyethylene glycol 400 PEG-400 and glycerine were used to form flexible films. In the characterization studies of the films produced by the solvent casting technique: determination of morphology, determination of folding, determination of disintegration time, determination of thickness, determination of swelling, determination of pH, determination of mass uniformity, determination of In vitro release, and determination of content uniformity studies were carried out. According to the results obtained, the non- brittle, smooth-surfaced films were disintegrated in the mouth in an average of 35 seconds. Since the 10th minute, more than 85 of the active pharmaceutical ingredient API has been revealed. These values suggested that the pullulan polymer showed better film-forming capacity when used with lycoat polymer. Ultraviolet UV-visible spectrum studies were carried out to validate donepezil HCl. Thanks to the ODFs containing donepezil HCl, an effective and safe, innovative clinical use has been achieved in the treatment of diseases such as dementia and Alzheimer, which are characterized by a decrease in daily life activities and atrophy in cognitive abilities.

Makale detayları

Evaluation and characterization of orally disintegrating films loaded donepezil hydrochloride for Alzheimer’s disease

Yazarlar:

Oya Kerimoğlu

Yayıncı:

Marmara University

Ana Başlıklar:

Pharmaceutical Biotechnology

Dergi:

Journal of Research in Pharmacy Vol.27 Issue 2, pp.893-902

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001347849

pISSN:

2630-6344

Orally disintegrating film

donepezil hydrochloride

pullulan

lycoat

Sayı

Makale detayları

Evaluation and characterization of orally disintegrating films loaded donepezil hydrochloride for Alzheimer’s disease

Yazarlar: Oya Kerimoğlu

Yayıncı: Marmara University

Ana Başlıklar: Pharmaceutical Biotechnology

Dergi: Journal of Research in Pharmacy Vol.27 Issue 2, pp.893-902

Belge Tipi: Makale

Yayın Tarihi: 6/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001347849

pISSN: 2630-6344

Orally disintegrating film

donepezil hydrochloride

pullulan

lycoat

Sayı

Yazarlar:

Oya Kerimoğlu

Yayıncı:

Marmara University

Ana Başlıklar:

Pharmaceutical Biotechnology

Dergi:

Journal of Research in Pharmacy Vol.27 Issue 2, pp.893-902

Belge Tipi:

Makale

Yayın Tarihi:

6/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001347849

pISSN:

2630-6344