Curing Temperature Effect on Slag Based Geopolymer Mortars Produced Using KOH Solution with Different Molarities

Murat Çavuş; Şinasi Bingöl

Makale detayları

Curing Temperature Effect on Slag Based Geopolymer Mortars Produced Using KOH Solution with Different Molarities

Yazarlar:

Murat Çavuş | Şinasi Bingöl

Yayıncı:

Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar:

İnşaat Mühendisliği

Dergi:

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1959-1970

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001304667

pISSN:

2687-3729

Anahtar kelimeler:

Özet:

 In this study, the physical and mechanical properties of high furnace slag HFS geopolymer mortars with different curing temperatures and different potassium hydroxide KOH ratios were examined. In the mixture of geopolimer mortars; While the amount of YFC, water and aggregates was kept constant, KOHs molarite was determined as 5, 10, 15, 20 M. The prepared mortars were placed in prism molds in sizes 40x40x160 mm and sphered for 24 hours at temperatures of 50, 75 and 100 C. The strength values of the samples were determined after waiting 1, 7, and 28 days in laboratory conditions. The physical properties of 28-day mortars were also determined, including unit weight, water absorption, clearance rate, and ultrases transition rate.

 In this study, the physical and mechanical properties of high furnace slag HFS geopolymer mortars with different curing temperatures and different potassium hydroxide KOH ratios were examined. In the mixture of geopolimer mortars; While the amount of YFC, water and aggregates was kept constant, KOHs molarite was determined as 5, 10, 15, 20 M. The prepared mortars were placed in prism molds in sizes 40x40x160 mm and sphered for 24 hours at temperatures of 50, 75 and 100 C. The strength values of the samples were determined after waiting 1, 7, and 28 days in laboratory conditions. The physical properties of 28-day mortars were also determined, including unit weight, water absorption, clearance rate, and ultrases transition rate.

 In this study, the physical and mechanical properties of high furnace slag HFS geopolymer mortars with different curing temperatures and different potassium hydroxide KOH ratios were examined. In the mixture of geopolimer mortars; While the amount of YFC, water and aggregates was kept constant, KOHs molarite was determined as 5, 10, 15, 20 M. The prepared mortars were placed in prism molds in sizes 40x40x160 mm and sphered for 24 hours at temperatures of 50, 75 and 100 C. The strength values of the samples were determined after waiting 1, 7, and 28 days in laboratory conditions. The physical properties of 28-day mortars were also determined, including unit weight, water absorption, clearance rate, and ultrases transition rate.

 Bu çalışmada, farklı kür sıcaklıklarına ve farklı potasyum hidroksit KOH oranlarına sahip yüksek fırın cüruflu YFC geopolimer harçların fiziksel ve mekanik özellikleri incelenmiştir. Geopolimer harçların karışımında; YFC, su ve agrega miktarı sabit tutulurken KOHin molaritesi 5, 10, 15, 20 M olarak belirlenmiştir. Hazırlanan harçlar 40x40x160 mm ebatlarında prizma kalıplara yerleştirilmiş ve 50, 75 ve 100 C sıcaklıklarda 24 saat küre tabi tutulmuşlardır. Elde edilen numuneler; 1, 7 ve 28 gün laboratuvar koşullarında bekletildikten sonra dayanım değerleri belirlenmiştir. Ayrıca 28 günlük harçların birim ağırlık, su emme, boşluk oranı ve ultrases geçiş hızı gibi fiziksel özellikleri belirlenmiştir.

Makale detayları

Curing Temperature Effect on Slag Based Geopolymer Mortars Produced Using KOH Solution with Different Molarities

Yazarlar:

Murat Çavuş | Şinasi Bingöl

Yayıncı:

Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar:

İnşaat Mühendisliği

Dergi:

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1959-1970

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001304667

pISSN:

2687-3729

High furnace slag

Geopolymer mortar

Compressive strengthYüksek fırın cürufu

Geopolimer harç

Basınç dayanımı

Sayı

Makale detayları

Curing Temperature Effect on Slag Based Geopolymer Mortars Produced Using KOH Solution with Different Molarities

Yazarlar: Murat Çavuş | Şinasi Bingöl

Yayıncı: Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar: İnşaat Mühendisliği

Dergi: Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1959-1970

Belge Tipi: Makale

Yayın Tarihi: 4/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001304667

pISSN: 2687-3729

High furnace slag

Geopolymer mortar

Compressive strengthYüksek fırın cürufu

Geopolimer harç

Basınç dayanımı

Sayı

Yazarlar:

Murat Çavuş | Şinasi Bingöl

Yayıncı:

Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar:

İnşaat Mühendisliği

Dergi:

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1959-1970

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001304667

pISSN:

2687-3729