Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS

Mehmet TAŞTAN; Hayrettin GÖKOZAN; Pınar SARI ÇAVDAR; Gürkan SOY; Uğur ÇAVDAR

doi:https://doi.org/10.29137/umagd.348072

Makale detayları

Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS

Yazarlar:

Mehmet TAŞTAN | Hayrettin GÖKOZAN | Pınar SARI ÇAVDAR | Gürkan SOY | Uğur ÇAVDAR

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

International Journal of Engineering Research and Development 2017 Vol.9 Issue 3, pp.174-185

Belge Tipi:

Makale

Yayın Tarihi:

12/2017

Belge Dili:

Türkçe

Document ID (Org No.):

2000647699

Sıklık:

İki Yıllık

eISSN:

1308-5514

DOI:

https://doi.org/10.29137/umagd.348072

Özet:

 


In
this study, pure aluminum (Al) powder metal (PM) compacts are sintered
conventional or induction systems. PM compacts are sintered by furnace at 600 °C
in 60 minutes in the conventional sintering process. In the other process, PM
compacts are sintered by induction system at seven different sintering
temperatures from 550°C to 610°C
in 4 minutes. 2.8 kW, 900 kHz ultra-high frequency induction system (UHFIS)
used for heating application of induction sintering process. Densities and
hardness values are investigated for both processes. During these sintering
processes, all energy consumption results are measured and calculated, than
compared with each other. The effects of the sintering time increase in the
induction sintering process on energy cost have been analyzed. Optimum
sintering temperature of the induction sintering process is determined. It has
been seen that the cheaper energy cost is obtained by the induction system for
sintering application.


.

Makale detayları

Energy Consumption Analysis of Sintering Temperature Optimization of Pure Aluminum Powder Metal Compacts Sintered by Using The UHFIS

Yazarlar: Mehmet TAŞTAN | Hayrettin GÖKOZAN | Pınar SARI ÇAVDAR | Gürkan SOY | Uğur ÇAVDAR

Yayıncı: Kirikkale University

Ana Başlıklar: Mühendislik ve uygulamalı operasyonlar

Dergi: International Journal of Engineering Research and Development 2017 Vol.9 Issue 3, pp.174-185

Belge Tipi: Makale

Yayın Tarihi: 12/2017

Belge Dili: Türkçe

Document ID (Org No.): 2000647699

Sıklık: İki Yıllık

eISSN: 1308-5514

DOI: https://doi.org/10.29137/umagd.348072

Sayı

Yazarlar:

Mehmet TAŞTAN | Hayrettin GÖKOZAN | Pınar SARI ÇAVDAR | Gürkan SOY | Uğur ÇAVDAR

Yayıncı:

Kirikkale University

Ana Başlıklar:

Mühendislik ve uygulamalı operasyonlar

Dergi:

International Journal of Engineering Research and Development 2017 Vol.9 Issue 3, pp.174-185

Belge Tipi:

Makale

Yayın Tarihi:

12/2017

Belge Dili:

Türkçe

Document ID (Org No.):

2000647699

Sıklık:

İki Yıllık

eISSN:

1308-5514

DOI:

https://doi.org/10.29137/umagd.348072