Three-Dimensional Examination of Humerus and Antebrachium Bones in the Red hawk (Buteo Rufinus) with Computed tomography (CT)

Veysel Delibaş; Zafer Soygüder; Cemil Göya; Loğman Aslan; Gamze Çakmak

Makale detayları

Three-Dimensional Examination of Humerus and Antebrachium Bones in the Red hawk (Buteo Rufinus) with Computed tomography (CT)

Yazarlar:

Veysel Delibaş | Zafer Soygüder | Cemil Göya | Loğman Aslan | Gamze Çakmak

Yayıncı:

Van Yuzuncu Yıl University

Ana Başlıklar:

Görüntüleme Sistemleri

Dergi:

Van Veterinary Journal Vol.35 Issue 1, pp.70-76

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001314745

pISSN:

2149-3359

Anahtar kelimeler:

Özet:

 The red hawk Buteo Rufinus is a medium-sized bird of prey with wide wings, belonging to the order Falconiformes and a member of the Accipitridae family. The Red hawk is a wild bird species and is easily recognized by its black feathers and red color on its wing feathers. In poultry, the thoracic extremity is developed as a wing. Techniques such as radiography, computed tomography and magnetic resonance contribute significantly to the evaluation of biological data in endangered species and wildlife because they provide the best view of anatomical structures and organs, are non-invasive, and allow sensitive diagnoses. The aim of this study was to create 3D models of the humerus and antebrachium bones of the Red hawk, an important bird of prey, with multi-detector computer tomography and to examine the bones mentioned morphologically and morphometrically through the models obtained. Humerus and antebrachium bones of a total of 6 dead adult Red hawks, 3 females and 3 males, were used as materials. When the morphometric results were examined, the average humerus length, average ulna length and average radius length in Red hawks were expressed in mm for the left and right extremities, regardless of gender. Moreover morphometric measurements of the humerus, ulna and radius bones were compared statistically between the right and left wings, and it was concluded that there was a significant difference between some values with a value of p0.05.

 The red hawk Buteo Rufinus is a medium-sized bird of prey with wide wings, belonging to the order Falconiformes and a member of the Accipitridae family. The Red hawk is a wild bird species and is easily recognized by its black feathers and red color on its wing feathers. In poultry, the thoracic extremity is developed as a wing. Techniques such as radiography, computed tomography and magnetic resonance contribute significantly to the evaluation of biological data in endangered species and wildlife because they provide the best view of anatomical structures and organs, are non-invasive, and allow sensitive diagnoses. The aim of this study was to create 3D models of the humerus and antebrachium bones of the Red hawk, an important bird of prey, with multi-detector computer tomography and to examine the bones mentioned morphologically and morphometrically through the models obtained. Humerus and antebrachium bones of a total of 6 dead adult Red hawks, 3 females and 3 males, were used as materials. When the morphometric results were examined, the average humerus length, average ulna length and average radius length in Red hawks were expressed in mm for the left and right extremities, regardless of gender. Moreover morphometric measurements of the humerus, ulna and radius bones were compared statistically between the right and left wings, and it was concluded that there was a significant difference between some values with a value of p0.05.

 The red hawk Buteo Rufinus is a medium-sized bird of prey with wide wings, belonging to the order Falconiformes and a member of the Accipitridae family. The Red hawk is a wild bird species and is easily recognized by its black feathers and red color on its wing feathers. In poultry, the thoracic extremity is developed as a wing. Techniques such as radiography, computed tomography and magnetic resonance contribute significantly to the evaluation of biological data in endangered species and wildlife because they provide the best view of anatomical structures and organs, are non-invasive, and allow sensitive diagnoses. The aim of this study was to create 3D models of the humerus and antebrachium bones of the Red hawk, an important bird of prey, with multi-detector computer tomography and to examine the bones mentioned morphologically and morphometrically through the models obtained. Humerus and antebrachium bones of a total of 6 dead adult Red hawks, 3 females and 3 males, were used as materials. When the morphometric results were examined, the average humerus length, average ulna length and average radius length in Red hawks were expressed in mm for the left and right extremities, regardless of gender. Moreover morphometric measurements of the humerus, ulna and radius bones were compared statistically between the right and left wings, and it was concluded that there was a significant difference between some values with a value of p0.05.

 Kızıl şahin Buteo Rufinus Falconiformes takımında yer alan ve Accipitridae familyasının bir üyesi olarak bulunan orta boylu geniş kanatlara sahip bir yırtıcı kuştur. Kızıl şahin yabani bir kanatlı türü olup kanat teleklerindeki siyah renkli tüyleri ve kızıl rengiyle kolayca tanınmaktadır. Kanatlılarda ön veya torakal extremite kanat halinde gelişmiştir. Kanat Ossa membri thoracicci ise sırasıyla scapula, clavicula, os coracoides, humerus, antebrachium ulna ve radius, carpus, metecarpus ve digitiden meydana gelmektedir. Radyografi, bilgisayarlı tomografi ve manyetik rezonans gibi teknikler, anatomik yapıların ve organların en iyi görünümünü sağlamaları, invaziv olmamaları ve hassas teşhislere imkan vermeleri nedeniyle nesli tükenmekte olan türlerin ve yaban hayatında biyolojik verilerin değerlendirilmesine önemli derecede katkı sağlamaktadır. Bu çalışma ile önemli bir yırtıcı kuş olan Kızıl şahinin humerus ve antebrachium kemiklerinin multi dedektörlü bilgisayarlı tomografi ile 3D modellerini oluşturmak, ayrıca elde edilen modeller aracılığı ile belirtilen kemiklerin morfolojik ve morfometrik olarak incelenmesi amaçlanmıştır. Materiyal olarak 3 adet dişi ve 3 adet erkek olmak üzere toplam 6 adet ölmüş erişkin Kızıl şahine ait humerus ve antebrachium kemikleri kullanıldı. Morfolojik olarak sonuçlar incelendiğinde, bilgisayarlı tomografi ile elde edilen 3 boyutlu görüntülerin anatomik yapıları net bir şekilde ortaya koyduğu sonucuna varılmıştr. Morfometrik sonuçlar incelendiğinde Kızıl şahinlerde ortalama humerus uzunluğu, ortlama ulna uzunluğu ve ortalama radius uzunluğu cinsiyet ayrımı yapmaksızın sol ve sağ extremite için mm şeklinde belirtilmiştir. Ayrıca humerus, ulna ve radius kemiklerinin morfometrik ölçümleri sağ ve sol kanat arasında istatistiksel olarak karşılaştırılmış ve bazı değerler arasında p0.05 değeri ile anlamlı bir farklılık olduğu sonucuna varılmıştır.

Makale detayları

Three-Dimensional Examination of Humerus and Antebrachium Bones in the Red hawk (Buteo Rufinus) with Computed tomography (CT)

Yazarlar:

Veysel Delibaş | Zafer Soygüder | Cemil Göya | Loğman Aslan | Gamze Çakmak

Yayıncı:

Van Yuzuncu Yıl University

Ana Başlıklar:

Görüntüleme Sistemleri

Dergi:

Van Veterinary Journal Vol.35 Issue 1, pp.70-76

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001314745

pISSN:

2149-3359

Computed tomography

Humerus

Red hawk

Radius

UlnaBilgisayarlı tomografi

Humerus

Kızıl şahin

Radius

Ulna

Sayı

Makale detayları

Yazarlar: Veysel Delibaş | Zafer Soygüder | Cemil Göya | Loğman Aslan | Gamze Çakmak

Yayıncı: Van Yuzuncu Yıl University

Ana Başlıklar: Görüntüleme Sistemleri

Dergi: Van Veterinary Journal Vol.35 Issue 1, pp.70-76

Belge Tipi: Makale

Yayın Tarihi: 3/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001314745

pISSN: 2149-3359

Sayı

Yazarlar:

Veysel Delibaş | Zafer Soygüder | Cemil Göya | Loğman Aslan | Gamze Çakmak

Yayıncı:

Van Yuzuncu Yıl University

Ana Başlıklar:

Görüntüleme Sistemleri

Dergi:

Van Veterinary Journal Vol.35 Issue 1, pp.70-76

Belge Tipi:

Makale

Yayın Tarihi:

3/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001314745

pISSN:

2149-3359