Effect of molybdenum application in pepper (Capsicum annuum L.) under cold stress conditions

Sultan Dere

Makale detayları

Effect of molybdenum application in pepper (Capsicum annuum L.) under cold stress conditions

Yazarlar:

Sultan Dere

Yayıncı:

Gültekin ÖZDEMİR

Ana Başlıklar:

Vegetable Growing and Treatment | Green-House Growing and Treatment

Dergi:

International Journal of Agriculture Environment and Food Sciences Vol.7 Issue 4, pp.838-846

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001300546

pISSN:

2618-5946

Anahtar kelimeler:

Özet:

 Cold stress low temperature stress is one of the abiotic stress factors. It causes many morphological and physiological problems in plants. One of the applications to eliminate and alleviate these negative effects is molybdenum application. The aim of this study was to determine the effect of molybdenum application on cold stress in commercial variety Mazamort pepper. In the experiment, control, 25 ppm molybdenum concentration, 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress applications were included. Pots of 2 L were used to grow the plants and the growing medium was a mixture of peat and perlite in a ratio of 2:1 by volume. Climatic chamber conditions were set to 241C during the day and 181C at night with 168 h lightdark photoperiodicity for control conditions and 241C during the day and 51C at night with photoperiodicity for cold stress conditions. The experiment was planned according to the random plots factorial design with 3 replications and 6 plants in each replicate. At the end of the study, plant height, stem diameter, number of leaves, plant fresh and dry weight, SPAD, wet basis moisture content, leaf proportional water content and ion leakage parameters were analysed. The highest plant height of Mazamort pepper variety was determined in 25 ppm molybdenum72 hours cold stress application 44.51 cm. Application of 25 ppm molybdenum was effective in alleviating the negative effect of cold stress on plant stem diameter, plant fresh-dry weight and turgor potential. Moisture content wet basis was lowest in 25 ppm molybdenum 72 hours cold stress application. SPAD value in pepper plants decreased under cold stress conditions. It was observed that 25 ppm molybdenum application was ineffective and the decrease increased under cold stress conditions. Ion leakage in Mazamort pepper variety was highest under 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress conditions. Under cold stress conditions, 25 ppm molybdenum application was ineffective. Molybdenum application under cold stress conditions was found to have positive effects on some parameters in general. In future studies, we believe that the application of different molybdenum concentrations and different cold stress periods will reveal the effects of molybdenum more clearly.

 Cold stress low temperature stress is one of the abiotic stress factors. It causes many morphological and physiological problems in plants. One of the applications to eliminate and alleviate these negative effects is molybdenum application. The aim of this study was to determine the effect of molybdenum application on cold stress in commercial variety Mazamort pepper. In the experiment, control, 25 ppm molybdenum concentration, 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress applications were included. Pots of 2 L were used to grow the plants and the growing medium was a mixture of peat and perlite in a ratio of 2:1 by volume. Climatic chamber conditions were set to 241C during the day and 181C at night with 168 h lightdark photoperiodicity for control conditions and 241C during the day and 51C at night with photoperiodicity for cold stress conditions. The experiment was planned according to the random plots factorial design with 3 replications and 6 plants in each replicate. At the end of the study, plant height, stem diameter, number of leaves, plant fresh and dry weight, SPAD, wet basis moisture content, leaf proportional water content and ion leakage parameters were analysed. The highest plant height of Mazamort pepper variety was determined in 25 ppm molybdenum72 hours cold stress application 44.51 cm. Application of 25 ppm molybdenum was effective in alleviating the negative effect of cold stress on plant stem diameter, plant fresh-dry weight and turgor potential. Moisture content wet basis was lowest in 25 ppm molybdenum 72 hours cold stress application. SPAD value in pepper plants decreased under cold stress conditions. It was observed that 25 ppm molybdenum application was ineffective and the decrease increased under cold stress conditions. Ion leakage in Mazamort pepper variety was highest under 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress conditions. Under cold stress conditions, 25 ppm molybdenum application was ineffective. Molybdenum application under cold stress conditions was found to have positive effects on some parameters in general. In future studies, we believe that the application of different molybdenum concentrations and different cold stress periods will reveal the effects of molybdenum more clearly.

 Cold stress low temperature stress is one of the abiotic stress factors. It causes many morphological and physiological problems in plants. One of the applications to eliminate and alleviate these negative effects is molybdenum application. The aim of this study was to determine the effect of molybdenum application on cold stress in commercial variety Mazamort pepper. In the experiment, control, 25 ppm molybdenum concentration, 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress applications were included. Pots of 2 L were used to grow the plants and the growing medium was a mixture of peat and perlite in a ratio of 2:1 by volume. Climatic chamber conditions were set to 241C during the day and 181C at night with 168 h lightdark photoperiodicity for control conditions and 241C during the day and 51C at night with photoperiodicity for cold stress conditions. The experiment was planned according to the random plots factorial design with 3 replications and 6 plants in each replicate. At the end of the study, plant height, stem diameter, number of leaves, plant fresh and dry weight, SPAD, wet basis moisture content, leaf proportional water content and ion leakage parameters were analysed. The highest plant height of Mazamort pepper variety was determined in 25 ppm molybdenum72 hours cold stress application 44.51 cm. Application of 25 ppm molybdenum was effective in alleviating the negative effect of cold stress on plant stem diameter, plant fresh-dry weight and turgor potential. Moisture content wet basis was lowest in 25 ppm molybdenum 72 hours cold stress application. SPAD value in pepper plants decreased under cold stress conditions. It was observed that 25 ppm molybdenum application was ineffective and the decrease increased under cold stress conditions. Ion leakage in Mazamort pepper variety was highest under 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress conditions. Under cold stress conditions, 25 ppm molybdenum application was ineffective. Molybdenum application under cold stress conditions was found to have positive effects on some parameters in general. In future studies, we believe that the application of different molybdenum concentrations and different cold stress periods will reveal the effects of molybdenum more clearly.

 Cold stress low temperature stress is one of the abiotic stress factors. It causes many morphological and physiological problems in plants. One of the applications to eliminate and alleviate these negative effects is molybdenum application. The aim of this study was to determine the effect of molybdenum application on cold stress in commercial variety Mazamort pepper. In the experiment, control, 25 ppm molybdenum concentration, 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress applications were included. Pots of 2 L were used to grow the plants and the growing medium was a mixture of peat and perlite in a ratio of 2:1 by volume. Climatic chamber conditions were set to 241C during the day and 181C at night with 168 h lightdark photoperiodicity for control conditions and 241C during the day and 51C at night with photoperiodicity for cold stress conditions. The experiment was planned according to the random plots factorial design with 3 replications and 6 plants in each replicate. At the end of the study, plant height, stem diameter, number of leaves, plant fresh and dry weight, SPAD, wet basis moisture content, leaf proportional water content and ion leakage parameters were analysed. The highest plant height of Mazamort pepper variety was determined in 25 ppm molybdenum72 hours cold stress application 44.51 cm. Application of 25 ppm molybdenum was effective in alleviating the negative effect of cold stress on plant stem diameter, plant fresh-dry weight and turgor potential. Moisture content wet basis was lowest in 25 ppm molybdenum 72 hours cold stress application. SPAD value in pepper plants decreased under cold stress conditions. It was observed that 25 ppm molybdenum application was ineffective and the decrease increased under cold stress conditions. Ion leakage in Mazamort pepper variety was highest under 72 hours cold stress and 25 ppm molybdenum 72 hours cold stress conditions. Under cold stress conditions, 25 ppm molybdenum application was ineffective. Molybdenum application under cold stress conditions was found to have positive effects on some parameters in general. In future studies, we believe that the application of different molybdenum concentrations and different cold stress periods will reveal the effects of molybdenum more clearly.

Makale detayları

Effect of molybdenum application in pepper (Capsicum annuum L.) under cold stress conditions

Yazarlar:

Sultan Dere

Yayıncı:

Gültekin ÖZDEMİR

Ana Başlıklar:

Vegetable Growing and Treatment | Green-House Growing and Treatment

Dergi:

International Journal of Agriculture Environment and Food Sciences Vol.7 Issue 4, pp.838-846

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001300546

pISSN:

2618-5946

Pepper

Molybdenum

Cold stress

Low temperature

Abiotic stress

Sayı

Makale detayları

Effect of molybdenum application in pepper (Capsicum annuum L.) under cold stress conditions

Yazarlar: Sultan Dere

Yayıncı: Gültekin ÖZDEMİR

Ana Başlıklar: Vegetable Growing and Treatment | Green-House Growing and Treatment

Dergi: International Journal of Agriculture Environment and Food Sciences Vol.7 Issue 4, pp.838-846

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001300546

pISSN: 2618-5946

Pepper

Molybdenum

Cold stress

Low temperature

Abiotic stress

Sayı

Yazarlar:

Sultan Dere

Yayıncı:

Gültekin ÖZDEMİR

Ana Başlıklar:

Vegetable Growing and Treatment | Green-House Growing and Treatment

Dergi:

International Journal of Agriculture Environment and Food Sciences Vol.7 Issue 4, pp.838-846

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001300546

pISSN:

2618-5946