DEVELOPMENT OF MULTI-MATERIAL COMPONENTS VIA ROBOTIC WIRE ARC ADDITIVE MANUFACTURING

Uğur GÜROL; Batuhan TURGUT; Nurten GÜLEÇYÜZ; Savaş DİLİBAL; Mustafa KOÇAK

Makale detayları

DEVELOPMENT OF MULTI-MATERIAL COMPONENTS VIA ROBOTIC WIRE ARC ADDITIVE MANUFACTURING

Yazarlar:

Uğur GÜROL | Batuhan TURGUT | Nurten GÜLEÇYÜZ | Savaş DİLİBAL | Mustafa KOÇAK

Yayıncı:

Kerim ÇETİNKAYA

Ana Başlıklar:

İmalat

Dergi:

International Journal of 3D Printing Technologies and Digital Industry 2021 Vol.5 Issue 3, pp.721-729

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

Türkçe

Document ID (Org No.):

2000473112

Sıklık:

Üç Yıllık

eISSN:

2602-3350

pISSN:

2602-3350

Özet:

 

Additive manufacturing technologies are applied in different industrial fields. It is possible to produce 3D parts in complex form at a lower cost with faster production capability using additive manufacturing compared to traditional subtractive manufacturing. Robotic welding-based wire arc additive manufacturing (WAAM) is a novel additive manufacturing technology which offers various solutions. Many products can be produced through the additive manufacturing in the fields of defense, aerospace, and automotive industries. In this study, multi-material metallic parts were produced by depositing ferritic ER 70 S-6 and stainless steel ER316L welding wires using robotic WAAM technology. Detailed microstructural analysis and hardness tests were conducted on the manufactured samples including interfaces between two different materials. Characterization of Fe-austenite weld interfaces has shown the presence of hard phases due to migration of hardening elements. The microhardness examination revealed that the highest hardness values are recorded at the bimetallic interface due to Fe and C migration through the interface layer.

 


Additive manufacturing technologies are applied in different industrial fields. It is possible to produce 3D parts in complex form at a lower cost with faster production capability using additive manufacturing compared to traditional subtractive manufacturing. Robotic welding-based wire arc additive manufacturing (WAAM) is a novel additive manufacturing technology which offers various solutions. Many products can be produced through the additive manufacturing in the fields of defense, aerospace, and automotive industries. In this study, multi-material metallic parts were produced by depositing ferritic ER 70 S-6 and stainless steel ER316L welding wires using robotic WAAM technology. Detailed microstructural analysis and hardness tests were conducted on the manufactured samples including interfaces between two different materials. Characterization of Fe-austenite weld interfaces has shown the presence of hard phases due to migration of hardening elements. The microhardness examination revealed that the highest hardness values are recorded at the bimetallic interface due to Fe and C migration through the interface layer.

.

Makale detayları

DEVELOPMENT OF MULTI-MATERIAL COMPONENTS VIA ROBOTIC WIRE ARC ADDITIVE MANUFACTURING

Yazarlar: Uğur GÜROL | Batuhan TURGUT | Nurten GÜLEÇYÜZ | Savaş DİLİBAL | Mustafa KOÇAK

Yayıncı: Kerim ÇETİNKAYA

Ana Başlıklar: İmalat

Dergi: International Journal of 3D Printing Technologies and Digital Industry 2021 Vol.5 Issue 3, pp.721-729

Belge Tipi: Makale

Yayın Tarihi: 12/2021

Belge Dili: Türkçe

Document ID (Org No.): 2000473112

Sıklık: Üç Yıllık

eISSN: 2602-3350

pISSN: 2602-3350

Sayı

Yazarlar:

Uğur GÜROL | Batuhan TURGUT | Nurten GÜLEÇYÜZ | Savaş DİLİBAL | Mustafa KOÇAK

Yayıncı:

Kerim ÇETİNKAYA

Ana Başlıklar:

İmalat

Dergi:

International Journal of 3D Printing Technologies and Digital Industry 2021 Vol.5 Issue 3, pp.721-729

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

Türkçe

Document ID (Org No.):

2000473112

Sıklık:

Üç Yıllık

eISSN:

2602-3350

pISSN:

2602-3350