Real-time implementation of three-level inverter-based D-STATCOM using neuro-fuzzy controller

Resul ÇÖTELİ; Hakan AÇIKGÖZ; Beşir DANDIL; Servet TUNCER

Makale detayları

Real-time implementation of three-level inverter-based D-STATCOM using neuro-fuzzy controller

Yazarlar:

Resul ÇÖTELİ | Hakan AÇIKGÖZ | Beşir DANDIL | Servet TUNCER

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2018 Vol.26 Issue 4, pp.2088-2103

Belge Tipi:

Makale

Yayın Tarihi:

7/2018

Belge Dili:

Türkçe

Document ID (Org No.):

2000735002

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632

Özet:

 

A distribution static compensator (D-STATCOM) is a custom power device connected in parallel to a power system to address electric power quality problems caused by reactive power and harmonics. To obtain high performance from a D-STATCOM, the D-STATCOM's \textit{dq}-axis currents must be controlled in an internal control loop. However, control of the D-STATCOM's currents is difficult because of its nonlinear structure, cross-coupling effect between the \textit{d}- and \textit{q}-axis, undefined dynamics, and fast changing load. Therefore, the controller to be preferred for a D-STATCOM should have a nonlinear and robust structure. In this study, a neuro-fuzzy controller (NFC), which is a robust and nonlinear controller, is proposed for \textit{dq}-axis current control of a D-STATCOM. A DSP-based experimental setup is built for real-time control. The basic building block of the experimental setup is a three-level cascaded inverter. This inverter is constructed by using three IPM intelligent modules. A DS1103 controller card is used for real-time control of the D-STATCOM's experimental setup. The control algorithm is prepared in MATLAB/Simulink software and loaded to the DS1103 controller card.  The performance of the NFC current-controlled D-STATCOM is tested for different load conditions: no load to full inductive, no load to full capacitive, full inductive to full capacitive, and full capacitive to full inductive. For this aim, the reactive current setpoint is changed as a step.  The experimental results are presented to show the efficiency of the proposed controller under different load conditions.

Makale detayları

Real-time implementation of three-level inverter-based D-STATCOM using neuro-fuzzy controller

Yazarlar: Resul ÇÖTELİ | Hakan AÇIKGÖZ | Beşir DANDIL | Servet TUNCER

Yayıncı: TUBITAK

Dergi: Turkish Journal of Electrical Engineering and Computer Science 2018 Vol.26 Issue 4, pp.2088-2103

Belge Tipi: Makale

Yayın Tarihi: 7/2018

Belge Dili: Türkçe

Document ID (Org No.): 2000735002

Sıklık: İki Aylık

eISSN: 1303-6203

pISSN: 1300-0632

Sayı

Yazarlar:

Resul ÇÖTELİ | Hakan AÇIKGÖZ | Beşir DANDIL | Servet TUNCER

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Electrical Engineering and Computer Science 2018 Vol.26 Issue 4, pp.2088-2103

Belge Tipi:

Makale

Yayın Tarihi:

7/2018

Belge Dili:

Türkçe

Document ID (Org No.):

2000735002

Sıklık:

İki Aylık

eISSN:

1303-6203

pISSN:

1300-0632