Assessment of the Altering of Tool Wear and Surface Finish in X2CrNiMoN2253 Stainless Steel Under Dry  Machining Conditions

Fikret Sönmez

Makale detayları

Assessment of the Altering of Tool Wear and Surface Finish in X2CrNiMoN2253 Stainless Steel Under Dry Machining Conditions

Yazarlar:

Fikret Sönmez

Yayıncı:

Hitit University

Ana Başlıklar:

Machining

Dergi:

Hittite Journal of Science and Engineering Vol.12 Issue 1, pp.35-41

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001343842

pISSN:

2148-4171

Anahtar kelimeler:

Özet:

 Machining is a challenging manufacturing method used for precision parts. In this method, tool wear is inevitable and increases constantly. Surface roughness values change caused by tool wear until the tool life is assumed to be complete. In this investigation, tool wear and the effect of tool wear on surface roughness were analyzed. For this purpose, the cutting experiments were performed on stainless steel material under dry machining circumstances at 1 mm depth of cut, 120 mmin cutting speed, and 0.1 mmrev feed. The tool wear and surface roughness values were inspected at the finish of each operation on the CNC turning center without removing the workpiece. As a consequence of the measurements, it was concluded that the surface roughness values generally deteriorated, and the tool wear increased regularly. Flank wear was found to be the primary type of wear in the experiments, and interestingly, the surface roughness decreased at the end of tool wear. In addition, it was determined that the tool wear reached the limit at the completion of the machining time of 14.4 minutes.

 Machining is a challenging manufacturing method used for precision parts. In this method, tool wear is inevitable and increases constantly. Surface roughness values change caused by tool wear until the tool life is assumed to be complete. In this investigation, tool wear and the effect of tool wear on surface roughness were analyzed. For this purpose, the cutting experiments were performed on stainless steel material under dry machining circumstances at 1 mm depth of cut, 120 mmin cutting speed, and 0.1 mmrev feed. The tool wear and surface roughness values were inspected at the finish of each operation on the CNC turning center without removing the workpiece. As a consequence of the measurements, it was concluded that the surface roughness values generally deteriorated, and the tool wear increased regularly. Flank wear was found to be the primary type of wear in the experiments, and interestingly, the surface roughness decreased at the end of tool wear. In addition, it was determined that the tool wear reached the limit at the completion of the machining time of 14.4 minutes.

 Machining is a challenging manufacturing method used for precision parts. In this method, tool wear is inevitable and increases constantly. Surface roughness values change caused by tool wear until the tool life is assumed to be complete. In this investigation, tool wear and the effect of tool wear on surface roughness were analyzed. For this purpose, the cutting experiments were performed on stainless steel material under dry machining circumstances at 1 mm depth of cut, 120 mmin cutting speed, and 0.1 mmrev feed. The tool wear and surface roughness values were inspected at the finish of each operation on the CNC turning center without removing the workpiece. As a consequence of the measurements, it was concluded that the surface roughness values generally deteriorated, and the tool wear increased regularly. Flank wear was found to be the primary type of wear in the experiments, and interestingly, the surface roughness decreased at the end of tool wear. In addition, it was determined that the tool wear reached the limit at the completion of the machining time of 14.4 minutes.

 Machining is a challenging manufacturing method used for precision parts. In this method, tool wear is inevitable and increases constantly. Surface roughness values change caused by tool wear until the tool life is assumed to be complete. In this investigation, tool wear and the effect of tool wear on surface roughness were analyzed. For this purpose, the cutting experiments were performed on stainless steel material under dry machining circumstances at 1 mm depth of cut, 120 mmin cutting speed, and 0.1 mmrev feed. The tool wear and surface roughness values were inspected at the finish of each operation on the CNC turning center without removing the workpiece. As a consequence of the measurements, it was concluded that the surface roughness values generally deteriorated, and the tool wear increased regularly. Flank wear was found to be the primary type of wear in the experiments, and interestingly, the surface roughness decreased at the end of tool wear. In addition, it was determined that the tool wear reached the limit at the completion of the machining time of 14.4 minutes.

Makale detayları

Assessment of the Altering of Tool Wear and Surface Finish in X2CrNiMoN2253 Stainless Steel Under Dry Machining Conditions

Yazarlar:

Fikret Sönmez

Yayıncı:

Hitit University

Ana Başlıklar:

Machining

Dergi:

Hittite Journal of Science and Engineering Vol.12 Issue 1, pp.35-41

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001343842

pISSN:

2148-4171

Tool wear

Surface roughness

Machining

Hard-to-cut materials

Sayı

Makale detayları

Assessment of the Altering of Tool Wear and Surface Finish in X2CrNiMoN2253 Stainless Steel Under Dry Machining Conditions

Yazarlar: Fikret Sönmez

Yayıncı: Hitit University

Ana Başlıklar: Machining

Dergi: Hittite Journal of Science and Engineering Vol.12 Issue 1, pp.35-41

Belge Tipi: Makale

Yayın Tarihi: 3/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001343842

pISSN: 2148-4171

Tool wear

Surface roughness

Machining

Hard-to-cut materials

Sayı

Yazarlar:

Fikret Sönmez

Yayıncı:

Hitit University

Ana Başlıklar:

Machining

Dergi:

Hittite Journal of Science and Engineering Vol.12 Issue 1, pp.35-41

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001343842

pISSN:

2148-4171