Modelling of the Effect of Different Infeed Angles and Cutting Areas on the Cutting Forces in External Threading

Muammer NALBANT; Mustafa GÜNAY; Yakup YILDIZ

Makale detayları

Modelling of the Effect of Different Infeed Angles and Cutting Areas on the Cutting Forces in External Threading

Yazarlar:

Muammer NALBANT | Mustafa GÜNAY | Yakup YILDIZ

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Engineering and Environmental Sciences 2008 Vol.32 Issue 3, pp.153-161

Belge Tipi:

Makale

Yayın Tarihi:

2/2008

Belge Dili:

Türkçe

Document ID (Org No.):

2000744847

Sıklık:

Üç Yıllık

eISSN:

1303-6157

pISSN:

1300-0160

Özet:

 

Variations in cutting forces were investigated  experimentally depending on infeed angles and cutting areas in the  external threading on a CNC turning centre.  For this purpose, AISI  1050 workpiece material, 16ERM AG 60 IC 908 cutting tool, and SER 2525  M16 tool holder were used.  External threading operations were  performed using 0°, 14.5°, 15°, 27.5°, and 30° infeed angles while the  cutting speed was held constant at 100 m/min for the experiments.  Experimental results showed that the infeed angle and cutting area had  significant effects on the main cutting force and the radial force  components were considerable in threading operations in terms of  energy consumption.  In addition, the optimum infeed angle was 30° in  the external threading operations in terms of cutting forces.

 

Variations in cutting forces were investigated  experimentally depending on infeed angles and cutting areas in the  external threading on a CNC turning centre.  For this purpose, AISI  1050 workpiece material, 16ERM AG 60 IC 908 cutting tool, and SER 2525  M16 tool holder were used.  External threading operations were  performed using 0°, 14.5°, 15°, 27.5°, and 30° infeed angles while the  cutting speed was held constant at 100 m/min for the experiments.  Experimental results showed that the infeed angle and cutting area had  significant effects on the main cutting force and the radial force  components were considerable in threading operations in terms of  energy consumption.  In addition, the optimum infeed angle was 30° in  the external threading operations in terms of cutting forces.

Makale detayları

Modelling of the Effect of Different Infeed Angles and Cutting Areas on the Cutting Forces in External Threading

Yazarlar: Muammer NALBANT | Mustafa GÜNAY | Yakup YILDIZ

Yayıncı: TUBITAK

Dergi: Turkish Journal of Engineering and Environmental Sciences 2008 Vol.32 Issue 3, pp.153-161

Belge Tipi: Makale

Yayın Tarihi: 2/2008

Belge Dili: Türkçe

Document ID (Org No.): 2000744847

Sıklık: Üç Yıllık

eISSN: 1303-6157

pISSN: 1300-0160

Sayı

Yazarlar:

Muammer NALBANT | Mustafa GÜNAY | Yakup YILDIZ

Yayıncı:

TUBITAK

Dergi:

Turkish Journal of Engineering and Environmental Sciences 2008 Vol.32 Issue 3, pp.153-161

Belge Tipi:

Makale

Yayın Tarihi:

2/2008

Belge Dili:

Türkçe

Document ID (Org No.):

2000744847

Sıklık:

Üç Yıllık

eISSN:

1303-6157

pISSN:

1300-0160