Performance and flow distribution of the plate heat exchanger with supercritical fluid of carbon dioxide

Chi-Chuan Wang; Chen-Xi Zhu; Yi-Chun Tang

doi:https://doi.org/10.18186/jte.21471

Makale detayları

Performance and flow distribution of the plate heat exchanger with supercritical fluid of carbon dioxide

Yazarlar:

Chi-Chuan Wang | Chen-Xi Zhu | Yi-Chun Tang

Yayıncı:

Yildiz Technical University

Dergi:

Journal of Thermal Engineering 2015 Vol.1 Issue 3, pp.143-151

Belge Tipi:

Makale

Yayın Tarihi:

2/2015

Belge Dili:

İngilizce

Document ID (Org No.):

2000506671

Sıklık:

İki Aylık

eISSN:

2148-7847

DOI:

https://doi.org/10.18186/jte.21471

Özet:

 

The present study proposes a plate heat exchanger model that is capable of simulating the supercritical fluids like CO2. The plate heat exchanger is of U-type configuration, and the size of the plate is 600 mm wide and 218 mm in height. Simulations are carried out for both isothermal and nonisothermal cases with water-to-water and water-to-CO2 plate heat exchanger. The proposed model was first compared with some existing water-to-water plate heat exchanger data. Generally, the predicted water flow distributions are in line with the experimental data. Yet the simulation results of temperature distribution alongside the plate agree excellently with other predicted model. For the water side distribution within the plate heat exchanger, it is found that a detectable mal-distribution prevails and the flowrate shows a consistent decline from the first to the last plate. Basically, a larger mal-distribution is seen when the inlet flowrate is increased or when the plate number is increased. The simulation indicates that the inlet temperature of water casts negligible influence on the water flowrate distribution. By contrast, it is found that the inlet temperature difference for the CO2 side may raise significant changes of thermodynamics andtransport property of CO2, and result in a great difference in flow distribution. Generally the maldistribution of the CO2 is much less severe due to more even pressure difference between the intake and exhaust manifold. The effect of pressure on heating capacity for the water-CO2.

Makale detayları

Performance and flow distribution of the plate heat exchanger with supercritical fluid of carbon dioxide

Yazarlar: Chi-Chuan Wang | Chen-Xi Zhu | Yi-Chun Tang

Yayıncı: Yildiz Technical University

Dergi: Journal of Thermal Engineering 2015 Vol.1 Issue 3, pp.143-151

Belge Tipi: Makale

Yayın Tarihi: 2/2015

Belge Dili: İngilizce

Document ID (Org No.): 2000506671

Sıklık: İki Aylık

eISSN: 2148-7847

DOI: https://doi.org/10.18186/jte.21471

Sayı

Yazarlar:

Chi-Chuan Wang | Chen-Xi Zhu | Yi-Chun Tang

Yayıncı:

Yildiz Technical University

Dergi:

Journal of Thermal Engineering 2015 Vol.1 Issue 3, pp.143-151

Belge Tipi:

Makale

Yayın Tarihi:

2/2015

Belge Dili:

İngilizce

Document ID (Org No.):

2000506671

Sıklık:

İki Aylık

eISSN:

2148-7847

DOI:

https://doi.org/10.18186/jte.21471