Design of Double Stator Axial Flux Permanent Magnet Synchronous Motor

Sümeyye Sarıdağ; Mustafa Eker

Makale detayları

Design of Double Stator Axial Flux Permanent Magnet Synchronous Motor

Yazarlar:

Sümeyye Sarıdağ | Mustafa Eker

Yayıncı:

Tokat Gaziosmanpasa University

Ana Başlıklar:

Elektrik Makineleri ve Sürücüler | Elektrik Mühendisliği (Diğer)

Dergi:

Journal of New Results in Engineering and Natural Sciences Vol.2024 Issue 21, pp.30-46

Belge Tipi:

Makale

Yayın Tarihi:

1/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001334709

pISSN:

2651-4583

Anahtar kelimeler:

Özet:

 In this study, the design of a Double Stator Single Rotor Axial Flux Permanent Magnet Synchronous Motor DS-AFPMSM is investigated. The motor design is carried out using an analytical approach, followed by the creation of a 3D solid model of the motor. The performance of the motor is investigated in detail using Finite Element Analysis FEA, and based on the preliminary results, optimization studies are carried out to improve the torque ripple value. The Multi-Objective Genetic Algorithm MOGA approach was used to optimize the magnets embrace, inner diameter, and outside diameter, among other factors. In this manner, average torque values and desired values were acquired, and torque ripple was improved. Finally, the load characteristics of the designed motor are extracted with SEY, and the performance of the motor under real operating conditions is analyzed. This study aims to contribute to the design and optimization processes of axial flow motors.

 In this study, the design of a Double Stator Single Rotor Axial Flux Permanent Magnet Synchronous Motor DS-AFPMSM is investigated. The motor design is carried out using an analytical approach, followed by the creation of a 3D solid model of the motor. The performance of the motor is investigated in detail using Finite Element Analysis FEA, and based on the preliminary results, optimization studies are carried out to improve the torque ripple value. The Multi-Objective Genetic Algorithm MOGA approach was used to optimize the magnets embrace, inner diameter, and outside diameter, among other factors. In this manner, average torque values and desired values were acquired, and torque ripple was improved. Finally, the load characteristics of the designed motor are extracted with SEY, and the performance of the motor under real operating conditions is analyzed. This study aims to contribute to the design and optimization processes of axial flow motors.

 In this study, the design of a Double Stator Single Rotor Axial Flux Permanent Magnet Synchronous Motor DS-AFPMSM is investigated. The motor design is carried out using an analytical approach, followed by the creation of a 3D solid model of the motor. The performance of the motor is investigated in detail using Finite Element Analysis FEA, and based on the preliminary results, optimization studies are carried out to improve the torque ripple value. The Multi-Objective Genetic Algorithm MOGA approach was used to optimize the magnets embrace, inner diameter, and outside diameter, among other factors. In this manner, average torque values and desired values were acquired, and torque ripple was improved. Finally, the load characteristics of the designed motor are extracted with SEY, and the performance of the motor under real operating conditions is analyzed. This study aims to contribute to the design and optimization processes of axial flow motors.

 Bu çalışmada, Çift Statorlu Tek Rotorlu Eksenel Akılı Sürekli Mıknatıslı Senkron Motor DS AFSM tasarımı ele alınmıştır. Motor tasarımı analitik bir yaklaşımla gerçekleştirilmiş, ardından motorun 3D katı modeli oluşturulmuştur. Motorun performansı, Sonlu Elemanlar Analizi SEY kullanılarak detaylı bir şekilde incelenmiş ve elde edilen ilk sonuçlar doğrultusunda, tork ripple değerinin iyileştirilmesine yönelik optimizasyon çalışmaları yapılmıştır. Optimizasyon sürecinde, MOGA Çok Amaçlı Genetik Algoritma yöntemi kullanılarak mıknatısın embrace, iç çapı ve dış çapı gibi parametreler optimize edilmiştir. Bu sayede, tork ripple ve ortalama tork değerlerinde iyileştirmeler sağlanmış ve hedeflenen değerler elde edilmiştir. Son olarak, tasarlanan motorun yük karakteristiği SEY ile çıkarılarak, motorun gerçek çalışma koşullarındaki performansı analiz edilmiştir. Bu çalışma, eksenel akılı motor tasarımı ve optimizasyon süreçlerine katkı sağlamayı amaçlamaktadır.

Makale detayları

Design of Double Stator Axial Flux Permanent Magnet Synchronous Motor

Yazarlar:

Sümeyye Sarıdağ | Mustafa Eker

Yayıncı:

Tokat Gaziosmanpasa University

Ana Başlıklar:

Elektrik Makineleri ve Sürücüler | Elektrik Mühendisliği (Diğer)

Dergi:

Journal of New Results in Engineering and Natural Sciences Vol.2024 Issue 21, pp.30-46

Belge Tipi:

Makale

Yayın Tarihi:

1/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001334709

pISSN:

2651-4583

Axial Flux Motor

FEA

MOGAEksenel Akılı Motor

SEY

MOGA

Sayı

Makale detayları

Design of Double Stator Axial Flux Permanent Magnet Synchronous Motor

Yazarlar: Sümeyye Sarıdağ | Mustafa Eker

Yayıncı: Tokat Gaziosmanpasa University

Ana Başlıklar: Elektrik Makineleri ve Sürücüler | Elektrik Mühendisliği (Diğer)

Dergi: Journal of New Results in Engineering and Natural Sciences Vol.2024 Issue 21, pp.30-46

Belge Tipi: Makale

Yayın Tarihi: 1/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001334709

pISSN: 2651-4583

Axial Flux Motor

FEA

MOGAEksenel Akılı Motor

SEY

MOGA

Sayı

Yazarlar:

Sümeyye Sarıdağ | Mustafa Eker

Yayıncı:

Tokat Gaziosmanpasa University

Ana Başlıklar:

Elektrik Makineleri ve Sürücüler | Elektrik Mühendisliği (Diğer)

Dergi:

Journal of New Results in Engineering and Natural Sciences Vol.2024 Issue 21, pp.30-46

Belge Tipi:

Makale

Yayın Tarihi:

1/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001334709

pISSN:

2651-4583