Obtaining Mathematical Formulations of Electrical Properties in Nanosized Tin and Sodium Doped Bi-2212 Superconductor System

Mehmet Ersin Aytekin; Ali Yüce; Berdan Özkurt

Makale detayları

Obtaining Mathematical Formulations of Electrical Properties in Nanosized Tin and Sodium Doped Bi-2212 Superconductor System

Yazarlar:

Mehmet Ersin Aytekin | Ali Yüce | Berdan Özkurt

Yayıncı:

Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar:

Malzeme Üretim Teknolojileri

Dergi:

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1864-1877

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001304681

pISSN:

2687-3729

Anahtar kelimeler:

Özet:

 In the presented study, the effect of nano-sized tin doping on strontium sites in the sodium-doped Bi-2212 superconductor system was investigated. Superconducting samples produced using the solid-state reaction method were characterized by X-ray diffraction analysis XRD and resistivity temperature measurements ρ-T. In addition, using the data obtained from the resistivity temperature graph, the theoretical relationship between the nanosized tin doping rate and the superconductivity transition temperature was obtained. Although some impurity phases were formed in the phase analyzes performed by XRD measurement, it was determined that the basic phase structure was Bi-2212 high temperature phase in all samples. In the findings obtained from the resistivity temperature graph, it was observed that all samples exhibited superconducting behavior. It was determined that the sample containing 0.05 nano size tin additive had better superconductivity properties compared to the other samples as a result of the experimental study. On the other hand, the mathematical formulations were obtained using the curve fitting tool in Matlab environment. Using the obtained mathematical formulations, it was theoretically determined that 0.682 nano-sized tin additives could provide optimum superconductivity properties.

 In the presented study, the effect of nano-sized tin doping on strontium sites in the sodium-doped Bi-2212 superconductor system was investigated. Superconducting samples produced using the solid-state reaction method were characterized by X-ray diffraction analysis XRD and resistivity temperature measurements ρ-T. In addition, using the data obtained from the resistivity temperature graph, the theoretical relationship between the nanosized tin doping rate and the superconductivity transition temperature was obtained. Although some impurity phases were formed in the phase analyzes performed by XRD measurement, it was determined that the basic phase structure was Bi-2212 high temperature phase in all samples. In the findings obtained from the resistivity temperature graph, it was observed that all samples exhibited superconducting behavior. It was determined that the sample containing 0.05 nano size tin additive had better superconductivity properties compared to the other samples as a result of the experimental study. On the other hand, the mathematical formulations were obtained using the curve fitting tool in Matlab environment. Using the obtained mathematical formulations, it was theoretically determined that 0.682 nano-sized tin additives could provide optimum superconductivity properties.

 In the presented study, the effect of nano-sized tin doping on strontium sites in the sodium-doped Bi-2212 superconductor system was investigated. Superconducting samples produced using the solid-state reaction method were characterized by X-ray diffraction analysis XRD and resistivity temperature measurements ρ-T. In addition, using the data obtained from the resistivity temperature graph, the theoretical relationship between the nanosized tin doping rate and the superconductivity transition temperature was obtained. Although some impurity phases were formed in the phase analyzes performed by XRD measurement, it was determined that the basic phase structure was Bi-2212 high temperature phase in all samples. In the findings obtained from the resistivity temperature graph, it was observed that all samples exhibited superconducting behavior. It was determined that the sample containing 0.05 nano size tin additive had better superconductivity properties compared to the other samples as a result of the experimental study. On the other hand, the mathematical formulations were obtained using the curve fitting tool in Matlab environment. Using the obtained mathematical formulations, it was theoretically determined that 0.682 nano-sized tin additives could provide optimum superconductivity properties.

 Sunulan çalışmada, sodyum katkılı Bi-2212 süperiletken sisteminde stronsiyum sitelere nano boyutta kalay katkısının etkisi araştırılmıştır. Katı hal tepkime yöntemi kullanılarak üretilen süperiletken örnekler X-ışını kırınım analizi XRD ve özdirenç sıcaklık ölçümleri ρ-T ile karakterize edildi. Bunun yanında, özdirenç sıcaklık grafiğinden elde edilen veriler kullanılarak, nano boyutta kalay katkılama oranı ve süperiletkenlik geçiş sıcaklığı arasında teoriksel ilişki elde edildi. XRD ölçümü ile yapılan faz analizlerinde bazı safsızlık fazlarının oluşmasına rağmen tüm örneklerde temel faz yapısının Bi-2212 yüksek sıcaklık fazının olduğu tespit edildi. Özdirenç sıcaklık grafiğinden elde edilen bulgularda tüm örneklerin süperiletken davranış sergilediği gözlemlendi. Deneysel çalışma sonucunda, 0.05 oranında nano boyutta kalay katkısı içeren örnek diğer örnekler ile karşılaştırıldığında daha iyi süperiletkenlik özelliklere sahip olduğu belirlendi. Diğer taraftan, Matematiksel formülasyonların elde edilmesi işlemi Matlab ortamında eğri uydurma aracı kullanılarak gerçekleştirildi. Elde edilen matematiksel formülasyonlardan yararlanarak 0.682 oranında nano boyutta kalay katkısının optimum süperiletkenlik özelliklerini sağlayabileceği teoriksel olarak belirlendi.

Makale detayları

Obtaining Mathematical Formulations of Electrical Properties in Nanosized Tin and Sodium Doped Bi-2212 Superconductor System

Yazarlar:

Mehmet Ersin Aytekin | Ali Yüce | Berdan Özkurt

Yayıncı:

Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar:

Malzeme Üretim Teknolojileri

Dergi:

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1864-1877

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001304681

pISSN:

2687-3729

Bi-2212

Superconductivity Transition Temperature

Resistivity

Curve FittingBi-2212

Süperiletkenlik Geçiş Sıcaklığı

Eğri Uydurma

Özdirenç

Sayı

Makale detayları

Yazarlar: Mehmet Ersin Aytekin | Ali Yüce | Berdan Özkurt

Yayıncı: Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar: Malzeme Üretim Teknolojileri

Dergi: Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1864-1877

Belge Tipi: Makale

Yayın Tarihi: 4/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001304681

pISSN: 2687-3729

Sayı

Yazarlar:

Mehmet Ersin Aytekin | Ali Yüce | Berdan Özkurt

Yayıncı:

Osmaniye Korkut Ata Üniversitesi

Ana Başlıklar:

Malzeme Üretim Teknolojileri

Dergi:

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi Vol.6 Issue 3, pp.1864-1877

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001304681

pISSN:

2687-3729