INVESTIGATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES PRODUCED BY USING THERMAL ANALYSIS IN THE PRODUCTION OF CAST IRON MATERIAL WITH VERMICULAR GRAPHITE

Hasan Hasırcı

Makale detayları

INVESTIGATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES PRODUCED BY USING THERMAL ANALYSIS IN THE PRODUCTION OF CAST IRON MATERIAL WITH VERMICULAR GRAPHITE

Yazarlar:

Hasan Hasırcı

Yayıncı:

Gazi University

Ana Başlıklar:

Mühendislik

Dergi:

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.11 Issue 2, pp.542-548

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292431

pISSN:

2147-9526

Anahtar kelimeler:

Özet:

 In this study; microstructure and mechanical properties of Vermicular Graphite Cast Iron VGCI material in accordance with EURO6 standard were evaluated by using thermal analysis during the production of engine block. Production of this engine block was performed by ladle metallurgy method with a new production approach suitable for mass production in Erkunt Industry company. Thermal analysis technique was used during production as a production control tool. Samples taken from the block material produced were examined in order to analyze microstructural and mechanical properties. The study results showed that the engine block produced was liable to the standards in terms of chemical composition, structure and mechanical properties. It was determined that the conformity of the microstructure and mechanical properties to the targeted standards can be ensured by using thermal analysis technique. Some foreign European countries approvals have been obtained for the material produced.

 In this study; microstructure and mechanical properties of Vermicular Graphite Cast Iron VGCI material in accordance with EURO6 standard were evaluated by using thermal analysis during the production of engine block. Production of this engine block was performed by ladle metallurgy method with a new production approach suitable for mass production in Erkunt Industry company. Thermal analysis technique was used during production as a production control tool. Samples taken from the block material produced were examined in order to analyze microstructural and mechanical properties. The study results showed that the engine block produced was liable to the standards in terms of chemical composition, structure and mechanical properties. It was determined that the conformity of the microstructure and mechanical properties to the targeted standards can be ensured by using thermal analysis technique. Some foreign European countries approvals have been obtained for the material produced.

 In this study; microstructure and mechanical properties of Vermicular Graphite Cast Iron VGCI material in accordance with EURO6 standard were evaluated by using thermal analysis during the production of engine block. Production of this engine block was performed by ladle metallurgy method with a new production approach suitable for mass production in Erkunt Industry company. Thermal analysis technique was used during production as a production control tool. Samples taken from the block material produced were examined in order to analyze microstructural and mechanical properties. The study results showed that the engine block produced was liable to the standards in terms of chemical composition, structure and mechanical properties. It was determined that the conformity of the microstructure and mechanical properties to the targeted standards can be ensured by using thermal analysis technique. Some foreign European countries approvals have been obtained for the material produced.

 In this study; microstructure and mechanical properties of Vermicular Graphite Cast Iron VGCI material in accordance with EURO6 standard were evaluated by using thermal analysis during the production of engine block. Production of this engine block was performed by ladle metallurgy method with a new production approach suitable for mass production in Erkunt Industry company. Thermal analysis technique was used during production as a production control tool. Samples taken from the block material produced were examined in order to analyze microstructural and mechanical properties. The study results showed that the engine block produced was liable to the standards in terms of chemical composition, structure and mechanical properties. It was determined that the conformity of the microstructure and mechanical properties to the targeted standards can be ensured by using thermal analysis technique. Some foreign European countries approvals have been obtained for the material produced.

Makale detayları

INVESTIGATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES PRODUCED BY USING THERMAL ANALYSIS IN THE PRODUCTION OF CAST IRON MATERIAL WITH VERMICULAR GRAPHITE

Yazarlar:

Hasan Hasırcı

Yayıncı:

Gazi University

Ana Başlıklar:

Mühendislik

Dergi:

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.11 Issue 2, pp.542-548

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292431

pISSN:

2147-9526

Vermicular Graphitic Cast Iron (VGCI)

EURO6 standard

Thermal analysis

Microstructure

Mechanical propertiesVermicular Graphitic Cast Iron (VGCI)

EURO6 standard

Thermal analysis

Microstructure

Mechanical properties

Sayı

Makale detayları

Yazarlar: Hasan Hasırcı

Yayıncı: Gazi University

Ana Başlıklar: Mühendislik

Dergi: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.11 Issue 2, pp.542-548

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001292431

pISSN: 2147-9526

Sayı

Yazarlar:

Hasan Hasırcı

Yayıncı:

Gazi University

Ana Başlıklar:

Mühendislik

Dergi:

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji Vol.11 Issue 2, pp.542-548

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001292431

pISSN:

2147-9526