Design of wind speed and direction measurement device using laser-based sensors

İbrahim Işıklı; Bayram Köse; Mehmet Sagbas

Makale detayları

Design of wind speed and direction measurement device using laser-based sensors

Yazarlar:

İbrahim Işıklı | Bayram Köse | Mehmet Sagbas

Yayıncı:

Nigde Omer Halisdemir University

Ana Başlıklar:

Elektrik Mühendisliği

Dergi:

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi Vol.12 Issue 3, pp.752-761

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295904

pISSN:

2564-6605

Anahtar kelimeler:

Özet:

 Different types of anemometers and direction determining devices are used in measuring wind speed and direction. Especially, low-cost and accurate measuring devices are required for the production and estimates of electricity generated from wind energy. Therefore, a design for an anemometer has been carried out using appropriate low-cost laser distance sensors, microcontrollers, and integrated electronic circuit equipment. The resulting anemometer from the design works based on the distance from the measurement center that changes according to wind speed and direction. The wind speed and direction data are obtained by digitally calculating this distance. By following a different approach than the existing techniques in measuring wind speed and direction, the data obtained in this method was compared with a real anemometer and an error analysis was performed. The relative error value was found to be 0.01685 as a result of the error analysis.

 Different types of anemometers and direction determining devices are used in measuring wind speed and direction. Especially, low-cost and accurate measuring devices are required for the production and estimates of electricity generated from wind energy. Therefore, a design for an anemometer has been carried out using appropriate low-cost laser distance sensors, microcontrollers, and integrated electronic circuit equipment. The resulting anemometer from the design works based on the distance from the measurement center that changes according to wind speed and direction. The wind speed and direction data are obtained by digitally calculating this distance. By following a different approach than the existing techniques in measuring wind speed and direction, the data obtained in this method was compared with a real anemometer and an error analysis was performed. The relative error value was found to be 0.01685 as a result of the error analysis.

 Different types of anemometers and direction determining devices are used in measuring wind speed and direction. Especially, low-cost and accurate measuring devices are required for the production and estimates of electricity generated from wind energy. Therefore, a design for an anemometer has been carried out using appropriate low-cost laser distance sensors, microcontrollers, and integrated electronic circuit equipment. The resulting anemometer from the design works based on the distance from the measurement center that changes according to wind speed and direction. The wind speed and direction data are obtained by digitally calculating this distance. By following a different approach than the existing techniques in measuring wind speed and direction, the data obtained in this method was compared with a real anemometer and an error analysis was performed. The relative error value was found to be 0.01685 as a result of the error analysis.

 Rüzgâr hızı ve yönü ölçümlerinde çeşitli anemometreler ve yön belirleme cihazları kullanılmaktadır. Rüzgâr enerjisinden elektrik üretimi ve tahminleri için uygun maliyetli, hassas ölçüm aletlerine ihtiyaç duyulmaktadır. Bu çalışmada, lazer mesafe sensörleri, mikrodenetleyiciler ve bütünleşmiş elektronik devreler kullanarak bir anemometre tasarlanmıştır. Tasarım, ölçüm merkezinden sapan mesafeye göre rüzgâr hızı ve yönü ölçmektedir. Bu mesafe sayısal olarak hesaplanarak rüzgâr verileri elde edilmiştir. Mevcut tekniklerden farklı olarak tasarlanan bu yöntem, gerçek bir anemometre ile karşılaştırılmış ve hata analizi yapılmıştır. Hata analizi sonucu bağıl hata değeri 0.01685 olarak bulunmuştur. Bu çalışmada kullanılan yöntem, düşük maliyetli ve hassas bir anemometre tasarlama açısından önemli sonuçlar vermektedir.

Makale detayları

Design of wind speed and direction measurement device using laser-based sensors

Yazarlar:

İbrahim Işıklı | Bayram Köse | Mehmet Sagbas

Yayıncı:

Nigde Omer Halisdemir University

Ana Başlıklar:

Elektrik Mühendisliği

Dergi:

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi Vol.12 Issue 3, pp.752-761

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295904

pISSN:

2564-6605

Wind energy

Wind speed measurement

Wind direction determination

Anemometer

LIDAR sensor

Optoelectronic

Optical distance measurementRüzgar Enerjisi

Rüzgar Hızı Ölçümü

Rüzgar Yönü Tespiti

Anemometre

LIDAR Sensör

Optoelektronik

Optik Mesafe Ölçümü

Sayı

Makale detayları

Yazarlar: İbrahim Işıklı | Bayram Köse | Mehmet Sagbas

Yayıncı: Nigde Omer Halisdemir University

Ana Başlıklar: Elektrik Mühendisliği

Dergi: Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi Vol.12 Issue 3, pp.752-761

Belge Tipi: Makale

Yayın Tarihi: 7/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001295904

pISSN: 2564-6605

Sayı

Yazarlar:

İbrahim Işıklı | Bayram Köse | Mehmet Sagbas

Yayıncı:

Nigde Omer Halisdemir University

Ana Başlıklar:

Elektrik Mühendisliği

Dergi:

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi Vol.12 Issue 3, pp.752-761

Belge Tipi:

Makale

Yayın Tarihi:

7/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295904

pISSN:

2564-6605