CERAMIC PRODUCTION WITH THREE-D PRINTERS FROM THE FIRST TYPE OF NEOLITIC POTS TO THE PRESENT

Serap Ünal; Uygar Hasekioğlu

Makale detayları

CERAMIC PRODUCTION WITH THREE-D PRINTERS FROM THE FIRST TYPE OF NEOLITIC POTS TO THE PRESENT

Yazarlar:

Serap Ünal | Uygar Hasekioğlu

Yayıncı:

Motif Yayıncılık

Ana Başlıklar:

Seramik ve Cam Tasarımı | Kültürel çalışmalar

Dergi:

Motif Akademi Halkbilimi Dergisi Vol.16 Issue 42, pp.821-835

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001290895

pISSN:

1308-4445

Anahtar kelimeler:

Özet:

 The method of creating the form by raising the form with the coiling technique, which is widely used in hand shaping in pottery, which is called the first type of pottery, is also maintained as an important cultural value today. This method has also inspired contemporary technologies. The technological basis of the forms produced with polymer and earth materials in three-dimensional printers is the first type of primitive pottery. Machine-assisted development of pottery production; From the wheel pottery to the production style made with 3D computer-aided printers, which has an important place among todays innovative production technologies, and in a further development, it has been carried to the construction of housing in architecture with the Delta Wasp system. In the study, it was emphasized that pottery, which is approximately 9000 years of terracotta production and culture, is a valuable material cultural element, its inspiring reflections on the contemporary ceramic industry and art were examined, together with the aforementioned biomimetic and historical transfer, Texture profile analysis TPA was made with the clays of the Lake District with 3D printers. It is aimed to produce information about ceramic production and applications.

 The method of creating the form by raising the form with the coiling technique, which is widely used in hand shaping in pottery, which is called the first type of pottery, is also maintained as an important cultural value today. This method has also inspired contemporary technologies. The technological basis of the forms produced with polymer and earth materials in three-dimensional printers is the first type of primitive pottery. Machine-assisted development of pottery production; From the wheel pottery to the production style made with 3D computer-aided printers, which has an important place among todays innovative production technologies, and in a further development, it has been carried to the construction of housing in architecture with the Delta Wasp system. In the study, it was emphasized that pottery, which is approximately 9000 years of terracotta production and culture, is a valuable material cultural element, its inspiring reflections on the contemporary ceramic industry and art were examined, together with the aforementioned biomimetic and historical transfer, Texture profile analysis TPA was made with the clays of the Lake District with 3D printers. It is aimed to produce information about ceramic production and applications.

 The method of creating the form by raising the form with the coiling technique, which is widely used in hand shaping in pottery, which is called the first type of pottery, is also maintained as an important cultural value today. This method has also inspired contemporary technologies. The technological basis of the forms produced with polymer and earth materials in three-dimensional printers is the first type of primitive pottery. Machine-assisted development of pottery production; From the wheel pottery to the production style made with 3D computer-aided printers, which has an important place among todays innovative production technologies, and in a further development, it has been carried to the construction of housing in architecture with the Delta Wasp system. In the study, it was emphasized that pottery, which is approximately 9000 years of terracotta production and culture, is a valuable material cultural element, its inspiring reflections on the contemporary ceramic industry and art were examined, together with the aforementioned biomimetic and historical transfer, Texture profile analysis TPA was made with the clays of the Lake District with 3D printers. It is aimed to produce information about ceramic production and applications.

 Birinci tür çömlekçilik olarak adlandırılan, elle şekillendirmede yaygın olarak kullanılan, formu fitil tekniği ile yükselterek oluşturma yöntemi, günümüzde de aynı zamanda önemli bir kültürel değer olarak sürdürülmektedir. Bu tarz üretimin ilk ustasının günümüzden 50-60 milyon yıl önce varlığı ön görülen çömlekçi yaban arısı olduğu da göz ardı edilmemelidir. Aynı zamanda bu yöntem çağdaş teknolojilere de esin vermiştir. Üç boyutlu yazıcılarda polimer ve toprak malzemelerle üretilen formların teknolojik temelde çıkış noktası birinci tür ilkel çömlekçiliktir. Çömlek üretiminin makine destekli gelişimi; çarklı çömlekçilikten itibaren, günümüzün inovatif üretim teknolojileri arasında önemli bir yer tutan 3B bilgisayar destekli yazıcılarla yapılan üretim tarzına ve daha da ileriye dönük bir gelişim içinde Delta Wasp sistemiyle mimaride konut yapımına kadar taşınmıştır. Çalışmada, yaklaşık 9000 yıllık pişmiş toprak üretimi ve kültürü olan çömlekçiliğin değerli bir maddi kültür unsuru olduğu vurgulanmış, çağdaş seramik endüstrisi ve sanatına ilham veren yansımaları incelenmiş, anılan biyomimetik ve tarihsel aktarımla birlikte, 3B yazıcılarla Göller Bölgesi killeri ile Tekstür profil analizi TPA yapılarak seramik üretimi ve uygulamaları hakkında bilgi üretilmesi amaçlanmıştır. Anahtar kelimeler: Çömlekçilik, Kültürel Miras, 3B Seramik Üretimi, Tekstür profil analizi.

Makale detayları

CERAMIC PRODUCTION WITH THREE-D PRINTERS FROM THE FIRST TYPE OF NEOLITIC POTS TO THE PRESENT

Yazarlar:

Serap Ünal | Uygar Hasekioğlu

Yayıncı:

Motif Yayıncılık

Ana Başlıklar:

Seramik ve Cam Tasarımı | Kültürel çalışmalar

Dergi:

Motif Akademi Halkbilimi Dergisi Vol.16 Issue 42, pp.821-835

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001290895

pISSN:

1308-4445

Pottery

Cultural Heritage

3D Ceramic Production

Texture profile analysisÇömlekçilik

Kültürel Miras

3B Seramik Üretimi

Tekstür profil analizi

Sayı

Makale detayları

Yazarlar: Serap Ünal | Uygar Hasekioğlu

Yayıncı: Motif Yayıncılık

Ana Başlıklar: Seramik ve Cam Tasarımı | Kültürel çalışmalar

Dergi: Motif Akademi Halkbilimi Dergisi Vol.16 Issue 42, pp.821-835

Belge Tipi: Makale

Yayın Tarihi: 12/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001290895

pISSN: 1308-4445

Sayı

Yazarlar:

Serap Ünal | Uygar Hasekioğlu

Yayıncı:

Motif Yayıncılık

Ana Başlıklar:

Seramik ve Cam Tasarımı | Kültürel çalışmalar

Dergi:

Motif Akademi Halkbilimi Dergisi Vol.16 Issue 42, pp.821-835

Belge Tipi:

Makale

Yayın Tarihi:

12/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001290895

pISSN:

1308-4445