INVESTIGATION OF THE HUB DIAMETER EFFECT ON PROPELLER THRUST

Enes COŞKUN; Mehmet Hanifi DOĞRU

Makale detayları

INVESTIGATION OF THE HUB DIAMETER EFFECT ON PROPELLER THRUST

Yazarlar:

Enes COŞKUN | Mehmet Hanifi DOĞRU

Yayıncı:

Necip Fazıl YILMAZ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

The International Journal of Materials and Engineering Technology 2022 Vol.5 Issue 1, pp.43-47

Belge Tipi:

Makale

Yayın Tarihi:

6/2022

Belge Dili:

İngilizce

Document ID (Org No.):

2000664010

Sıklık:

İki Yıllık

eISSN:

2667-4033

Özet:

 

With the widespread of unmanned aerial vehicles in the aviation industry, the importance of detailed examination of propellers, whose task is to provide thrust, has also increased. A propeller is a part that is formed by attaching more than one aerodynamically shaped blade to a hub and produces thrust by being rotated by a motor. The amount of thrust that is produced by a propeller depends on some parameters such as diameter, number of blades, pitch angle etc. The aim of this study is to investigate the thrust distribution along a propeller diameter section with the gradual increase of the hub diameter. Related studies show that the maximum thrust of a propeller is obtained in the region between 75% and 85% of the propeller length. In order to obtain the necessary data, numerical flow analyzes were made and the results were discussed. As a conclusion, at the very closer to the root of the propeller blade, the amount of produced thrust is considerably low compared to the near tip of propeller. Therefore, the thrust loss due to the increase of the propeller hub diameter is negligible and maximum thrust obtained in the expected region.

Makale detayları

INVESTIGATION OF THE HUB DIAMETER EFFECT ON PROPELLER THRUST

Yazarlar: Enes COŞKUN | Mehmet Hanifi DOĞRU

Yayıncı: Necip Fazıl YILMAZ

Ana Başlıklar: Diğer mühendislik dalları

Dergi: The International Journal of Materials and Engineering Technology 2022 Vol.5 Issue 1, pp.43-47

Belge Tipi: Makale

Yayın Tarihi: 6/2022

Belge Dili: İngilizce

Document ID (Org No.): 2000664010

Sıklık: İki Yıllık

eISSN: 2667-4033

Sayı

Yazarlar:

Enes COŞKUN | Mehmet Hanifi DOĞRU

Yayıncı:

Necip Fazıl YILMAZ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

The International Journal of Materials and Engineering Technology 2022 Vol.5 Issue 1, pp.43-47

Belge Tipi:

Makale

Yayın Tarihi:

6/2022

Belge Dili:

İngilizce

Document ID (Org No.):

2000664010

Sıklık:

İki Yıllık

eISSN:

2667-4033