Provincial Assessment of IPPC Compliance Status of Facilities Operating in the “Surface Treatment of Metals and Plastics (STM)” Sector

Rahman Çalhan

Makale detayları

Provincial Assessment of IPPC Compliance Status of Facilities Operating in the “Surface Treatment of Metals and Plastics (STM)” Sector

Yazarlar:

Rahman Çalhan

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Mühendislik

Dergi:

Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.22-34

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295375

pISSN:

2146-7277

Anahtar kelimeler:

Özet:

 This study is carried out in Turkey within the scope of Best Available Techniques BAT prepared in accordance with Article 16 2 of Council Directive 9661  EC IPPC Directive Reference Document BREF for facilities operating in the Surface Treatment of Metals and Plastics STM sector. It was conducted to ascertain the level of compliance with the Integrated Pollution Prevention and Control IPPC regulations of the facilities operating in Turkey, the transitional periods to IPPC, and their distribution by provinces. For the study, a survey of the facilities covered by the directive was conducted, and the responses from the institutions were statistically analyzed. According to the results of the analysis, the distribution of the facilities within the scope by provinces in Turkey, which BAT should be prioritized for IPPC compliance, and the time required for the necessary improvementsinvestments were determined.

 This study is carried out in Turkey within the scope of Best Available Techniques BAT prepared in accordance with Article 16 2 of Council Directive 9661  EC IPPC Directive Reference Document BREF for facilities operating in the Surface Treatment of Metals and Plastics STM sector. It was conducted to ascertain the level of compliance with the Integrated Pollution Prevention and Control IPPC regulations of the facilities operating in Turkey, the transitional periods to IPPC, and their distribution by provinces. For the study, a survey of the facilities covered by the directive was conducted, and the responses from the institutions were statistically analyzed. According to the results of the analysis, the distribution of the facilities within the scope by provinces in Turkey, which BAT should be prioritized for IPPC compliance, and the time required for the necessary improvementsinvestments were determined.

 This study is carried out in Turkey within the scope of Best Available Techniques BAT prepared in accordance with Article 16 2 of Council Directive 9661  EC IPPC Directive Reference Document BREF for facilities operating in the Surface Treatment of Metals and Plastics STM sector. It was conducted to ascertain the level of compliance with the Integrated Pollution Prevention and Control IPPC regulations of the facilities operating in Turkey, the transitional periods to IPPC, and their distribution by provinces. For the study, a survey of the facilities covered by the directive was conducted, and the responses from the institutions were statistically analyzed. According to the results of the analysis, the distribution of the facilities within the scope by provinces in Turkey, which BAT should be prioritized for IPPC compliance, and the time required for the necessary improvementsinvestments were determined.

 Bu çalışma Metallerin ve Plastiklerin Yüzey İşlemi STM sektöründe faaliyet gösteren tesisler Referans Belgesi BREF, 9661  EC sayılı Konsey Direktifinin IPPC Direktifi 16 2 Maddesi uyarınca hazırlanan Mevcut En İyi Teknikler MET kapsamında Türkiyede faaliyet gösteren tesislerin Entegre Kirlilik Önleme ve Kontrolü EKÖK mevzuatına uyum durumunun, EKÖKe geçiş sürelerinin ve illere göre dağılımlarının belirlenmesi amacıyla gerçekleştirilmiştir. Çalışmada, direktif kapsamına giren tesislere anket düzenlenmiş ve tesislerden gelen cevaplar istatiksel olarak analiz edilmiştir. Analiz sonuçlarına göre kapsam dahilindeki tesislerin Türkiyede illere göre dağılımları, EKÖK uyumu için hangi METlere öncelik verilmesi gerektiği ve gereken iyileştirmeyatırımlar için gereken süreler belirlenmiştir.

Makale detayları

Provincial Assessment of IPPC Compliance Status of Facilities Operating in the “Surface Treatment of Metals and Plastics (STM)” Sector

Yazarlar:

Rahman Çalhan

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Mühendislik

Dergi:

Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.22-34

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295375

pISSN:

2146-7277

Integrated pollution prevention and control

Surface treatment of metals and plastics

Best available techniques

Surface coating

Galvanizing

WastewaterEntegre kirlilik önleme ve kontrol

Metallerin ve plastiklerin yüzey işlemi

Mevcut en iyi teknikler

Yüzey kaplama

Galvaniz

Atıksu

Sayı

Makale detayları

Yazarlar: Rahman Çalhan

Yayıncı: Zonguldak Bulent Ecevit University

Ana Başlıklar: Mühendislik

Dergi: Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.22-34

Belge Tipi: Makale

Yayın Tarihi: 6/2023

Belge Dili: Türkçe

Document ID (Org No.): 2001295375

pISSN: 2146-7277

Sayı

Yazarlar:

Rahman Çalhan

Yayıncı:

Zonguldak Bulent Ecevit University

Ana Başlıklar:

Mühendislik

Dergi:

Karaelmas Fen ve Mühendislik Dergisi Vol.13 Issue 1, pp.22-34

Belge Tipi:

Makale

Yayın Tarihi:

6/2023

Belge Dili:

Türkçe

Document ID (Org No.):

2001295375

pISSN:

2146-7277