Effect of Fiber Addition on Fluoride Release of Resin-Modified Glass Ionomer Cement

Muhittin Uğurlu; Gülben Çolak

Makale detayları

Effect of Fiber Addition on Fluoride Release of Resin-Modified Glass Ionomer Cement

Yazarlar:

Muhittin Uğurlu | Gülben Çolak

Yayıncı:

Selcuk University

Ana Başlıklar:

Dental Materials and Equipment | Restorative Dentistry

Dergi:

Selcuk Dental Journal Vol.12 Issue 1, pp.32-36

Belge Tipi:

Makale

Yayın Tarihi:

4/2025

Belge Dili:

Türkçe

Document ID (Org No.):

2001345477

pISSN:

2148-7529

Anahtar kelimeler:

Özet:

 Objective: The study aimed to evaluate the effect of adding fiber with different ratios to resin-modified glass ionomer cement RMGIC on fluoride release. Material and Methods: Four test groups were created by adding E-glass fiber at different weight ratios 5, 10, and 20 to the powder of an RMGIC Fuji II LC. Forty disk-shaped 8x2 samples were prepared using Teflon mold n10. After the samples were kept in tubes containing 5 ml of distilled water at 37C for 24 hours, they were removed from the distilled water and placed in a new tube containing distilled water. At the end of 24 hours, the fluoride concentration in the distilled water from which the samples were taken was measured by mixing it with the ionic strength adjustable buffer TISAB II solution and using an ion-selective fluoride electrode and an ion analyzer Thermo Orion 720. The same procedures were carried out at the end of the 3rd, 7th, 14th, 21st, and 28th days, and the amount of fluoride released was determined. Data were analyzed statistically using repeated measure ANOVA and Tukeys HSD multiple comparison tests p0.05. Results: The highest fluoride release was detected after 24 hours in all test groups p0.05. In all test periods, the highest fluoride release was found in the control and 5 fiber-added groups p0.05. No statistically significant difference was detected between these two groups p0.05. Adding 10 and 20 fiber to RMGIC caused a decrease in fluoride release p0.05. There was no statistically significant difference between these two groups p0.05. Conclusion: It was concluded that 5 fiber addition to RMGIC did not affect fluoride release, but 10 and 20 fiber addition reduced the amount of fluoride released. Key Words: Glass Ionomer Cement, Fiber, Fluoride, Resin.

 Objective: The study aimed to evaluate the effect of adding fiber with different ratios to resin-modified glass ionomer cement RMGIC on fluoride release. Material and Methods: Four test groups were created by adding E-glass fiber at different weight ratios 5, 10, and 20 to the powder of an RMGIC Fuji II LC. Forty disk-shaped 8x2 samples were prepared using Teflon mold n10. After the samples were kept in tubes containing 5 ml of distilled water at 37C for 24 hours, they were removed from the distilled water and placed in a new tube containing distilled water. At the end of 24 hours, the fluoride concentration in the distilled water from which the samples were taken was measured by mixing it with the ionic strength adjustable buffer TISAB II solution and using an ion-selective fluoride electrode and an ion analyzer Thermo Orion 720. The same procedures were carried out at the end of the 3rd, 7th, 14th, 21st, and 28th days, and the amount of fluoride released was determined. Data were analyzed statistically using repeated measure ANOVA and Tukeys HSD multiple comparison tests p0.05. Results: The highest fluoride release was detected after 24 hours in all test groups p0.05. In all test periods, the highest fluoride release was found in the control and 5 fiber-added groups p0.05. No statistically significant difference was detected between these two groups p0.05. Adding 10 and 20 fiber to RMGIC caused a decrease in fluoride release p0.05. There was no statistically significant difference between these two groups p0.05. Conclusion: It was concluded that 5 fiber addition to RMGIC did not affect fluoride release, but 10 and 20 fiber addition reduced the amount of fluoride released. Key Words: Glass Ionomer Cement, Fiber, Fluoride, Resin.

 Objective: The study aimed to evaluate the effect of adding fiber with different ratios to resin-modified glass ionomer cement RMGIC on fluoride release. Material and Methods: Four test groups were created by adding E-glass fiber at different weight ratios 5, 10, and 20 to the powder of an RMGIC Fuji II LC. Forty disk-shaped 8x2 samples were prepared using Teflon mold n10. After the samples were kept in tubes containing 5 ml of distilled water at 37C for 24 hours, they were removed from the distilled water and placed in a new tube containing distilled water. At the end of 24 hours, the fluoride concentration in the distilled water from which the samples were taken was measured by mixing it with the ionic strength adjustable buffer TISAB II solution and using an ion-selective fluoride electrode and an ion analyzer Thermo Orion 720. The same procedures were carried out at the end of the 3rd, 7th, 14th, 21st, and 28th days, and the amount of fluoride released was determined. Data were analyzed statistically using repeated measure ANOVA and Tukeys HSD multiple comparison tests p0.05. Results: The highest fluoride release was detected after 24 hours in all test groups p0.05. In all test periods, the highest fluoride release was found in the control and 5 fiber-added groups p0.05. No statistically significant difference was detected between these two groups p0.05. Adding 10 and 20 fiber to RMGIC caused a decrease in fluoride release p0.05. There was no statistically significant difference between these two groups p0.05. Conclusion: It was concluded that 5 fiber addition to RMGIC did not affect fluoride release, but 10 and 20 fiber addition reduced the amount of fluoride released. Key Words: Glass Ionomer Cement, Fiber, Fluoride, Resin.

 Amaç: Bu çalışmanın amacı rezin modifiye cam iyonomer simana RMCİS farklı miktarlarda fiber ilavesinin florid salınımına etkisini değerlendirilmektir. Gereç ve Yöntemler: Bir RMCİSin Fuji II LC tozuna ağırlıkça farklı oranlarda 5, 10 ve 20 E-cam fiber ilave edilerek kontrol grubu ile birlikte dört test grubu oluşturuldu. Teflon kalıp kullanılarak 40 adet disk şeklinde 8x2 örnek hazırlandı n10. Örnekler 37Cde 5 ml distile su içeren tüpler içerisinde 24 saat bekletildikten sonra distile sudan çıkarılıp yeni bir distile su içeren tüpe konuldu. 24 saat sonunda örneklerin çıkarıldığı distile su içerisindeki florid konsantrasyonu iyonik gücü ayarlanabilir tampon TISAB II çözeltisi ile karıştırılarak, iyon selektif flor elektrodu ve bir iyon analizörü Thermo Orion 720 kullanılarak ölçüldü. Aynı işlemler 3, 7, 14, 21 ve 28. günlerin sonunda da yapılarak salınan florid miktarları belirlendi. Veriler tekrarlayan ölçümlü varyans analizi ve Tukeys HSD çoklu karşılaştırma testleri kullanılarak istatistiksel olarak analiz edildi p0,05. Bulgular: Test gruplarının hepsinde en yüksek florid salınımı 24 saat sonunda saptandı p0,05. Bütün test periyotlarında en fazla florid salınımı kontrol grubunda ve 5 fiber ilave edilen grupta bulundu p0,05. Bu iki grup arasında istatistiksel olarak anlamlı fark tespit edilmedi p0,05. RMCİSe 10 ve 20 fiber ilave edilmesi florid salınımının azalmasına neden oldu p0,05. Bu iki grup arasında istatistiksel olarak anlamlı bir fark bulunmadı p0,05. Sonuç: RMCİSe 5 oranında fiber ilavesinin florid salınımını etkilemediği, ancak 10 ve 20 oranında fiber ilavesinin salınan florid miktarını azalttığı sonucuna varılmıştır. Anahtar Kelimeler: Cam İyonomer Siman, Fiber, Florid, Rezin.

Makale detayları

Effect of Fiber Addition on Fluoride Release of Resin-Modified Glass Ionomer Cement

Yazarlar:

Muhittin Uğurlu | Gülben Çolak

Yayıncı:

Selcuk University

Ana Başlıklar:

Dental Materials and Equipment | Restorative Dentistry

Dergi:

Selcuk Dental Journal Vol.12 Issue 1, pp.32-36

Belge Tipi:

Makale

Yayın Tarihi:

4/2025

Belge Dili:

Türkçe

Document ID (Org No.):

2001345477

pISSN:

2148-7529

Glass ionomer cement

Fiber

Fluoride

ResinCam iyonomer siman

Fiber

Florid

Rezin

Sayı

Makale detayları

Yazarlar: Muhittin Uğurlu | Gülben Çolak

Yayıncı: Selcuk University

Ana Başlıklar: Dental Materials and Equipment | Restorative Dentistry

Dergi: Selcuk Dental Journal Vol.12 Issue 1, pp.32-36

Belge Tipi: Makale

Yayın Tarihi: 4/2025

Belge Dili: Türkçe

Document ID (Org No.): 2001345477

pISSN: 2148-7529

Sayı

Yazarlar:

Muhittin Uğurlu | Gülben Çolak

Yayıncı:

Selcuk University

Ana Başlıklar:

Dental Materials and Equipment | Restorative Dentistry

Dergi:

Selcuk Dental Journal Vol.12 Issue 1, pp.32-36

Belge Tipi:

Makale

Yayın Tarihi:

4/2025

Belge Dili:

Türkçe

Document ID (Org No.):

2001345477

pISSN:

2148-7529