Evaluation of the Polymerization Depth of Bulk Fill Resin Composites Polymerized by Different Procedures: An In-Vitro Study

Esra ÖZYURT; Aysegul KURT; Handan YILDIRIM

doi:https://doi.org/10.33808/clinexphealthsci.529030

Makale detayları

Evaluation of the Polymerization Depth of Bulk Fill Resin Composites Polymerized by Different Procedures: An In-Vitro Study

Yazarlar:

Esra ÖZYURT | Aysegul KURT | Handan YILDIRIM

Yayıncı:

Marmara University

Ana Başlıklar:

Sağlık teşvikleri

Dergi:

Clinical and Experimental Health Sciences 2019 Vol.9 Issue 4, pp.304-309

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000907036

Sıklık:

Aylık

eISSN:

2459-1459

DOI:

https://doi.org/10.33808/clinexphealthsci.529030

Özet:

 

Objective: The aim of this study is to investigate the depth of cure (DOC) of the bulk fill composite samples prepared in different thicknesses with two different modes of light curing device with Vickers hardness tester.Methods: Five different bulk-fill composite materials were used in the present study. 20 sample of 2 mm and 20 sample of 4 mm thick samples were prepared, 10 samples from each group were polymerized for 20 seconds with the standard mode (Mode 1) of the light curing device and 10 samples polymerized with soft-start mode (Mode 2) for 25 seconds (n=10). Hardness measurements were made from the upper and lower surfaces of each sample and the hardness ratio was calculated. The statistical analysis was performed using three-way analysis of variance (ANOVA) and Tukey multiple comparisons (p = 0.05).Results: The hardness ratios of all composites were determined to be over 80%, which is clinically acceptable. There was a statistically significant difference between the DOC levels according to the composites (p 0.05).Conclusions: The surface hardness ratios of all groups were determined to be over 80%, which is clinically acceptable. The polymerization with soft start technique may not different from the standard-mode for polymerization depth.

Makale detayları

Evaluation of the Polymerization Depth of Bulk Fill Resin Composites Polymerized by Different Procedures: An In-Vitro Study

Yazarlar: Esra ÖZYURT | Aysegul KURT | Handan YILDIRIM

Yayıncı: Marmara University

Ana Başlıklar: Sağlık teşvikleri

Dergi: Clinical and Experimental Health Sciences 2019 Vol.9 Issue 4, pp.304-309

Belge Tipi: Makale

Yayın Tarihi: 12/2019

Belge Dili: İngilizce

Document ID (Org No.): 2000907036

Sıklık: Aylık

eISSN: 2459-1459

DOI: https://doi.org/10.33808/clinexphealthsci.529030

Sayı

Yazarlar:

Esra ÖZYURT | Aysegul KURT | Handan YILDIRIM

Yayıncı:

Marmara University

Ana Başlıklar:

Sağlık teşvikleri

Dergi:

Clinical and Experimental Health Sciences 2019 Vol.9 Issue 4, pp.304-309

Belge Tipi:

Makale

Yayın Tarihi:

12/2019

Belge Dili:

İngilizce

Document ID (Org No.):

2000907036

Sıklık:

Aylık

eISSN:

2459-1459

DOI:

https://doi.org/10.33808/clinexphealthsci.529030