Coating of AISI 1018 steel with the pack-boriding method

Ramazan Erarslan; Uğur Öztürk; Fikret Yılmaz

Makale detayları

Coating of AISI 1018 steel with the pack-boriding method

Yazarlar:

Ramazan Erarslan | Uğur Öztürk | Fikret Yılmaz

Yayıncı:

Tokat Gaziosmanpasa University

Ana Başlıklar:

Engineering

Dergi:

Journal of New Results in Science Vol.12 Issue 1, pp.14-21

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001289050

pISSN:

1304-7981

Anahtar kelimeler:

Özet:

 In this study, AISI 1018 steel with low carbon content was coated with the pack-boriding method at 950 C for 2h and 4h. A two-layer structure was observed in the 2h boronized material: the thin FeB phase and the more prominent Fe2B phase. In addition to this two-phase structure, undesirable phases SiC and Fe3O4 were detected in the material boronized for 4h. It was observed that the wear resistance and hardness of the boronized materials increased greatly, which is explained by the hard FeB and Fe2B phases. In addition, as the heat treatment time increases, the thickness of the FeB phase increases while the thickness of the Fe2B phase decreases.

 In this study, AISI 1018 steel with low carbon content was coated with the pack-boriding method at 950 C for 2h and 4h. A two-layer structure was observed in the 2h boronized material: the thin FeB phase and the more prominent Fe2B phase. In addition to this two-phase structure, undesirable phases SiC and Fe3O4 were detected in the material boronized for 4h. It was observed that the wear resistance and hardness of the boronized materials increased greatly, which is explained by the hard FeB and Fe2B phases. In addition, as the heat treatment time increases, the thickness of the FeB phase increases while the thickness of the Fe2B phase decreases.

 In this study, AISI 1018 steel with low carbon content was coated with the pack-boriding method at 950 C for 2h and 4h. A two-layer structure was observed in the 2h boronized material: the thin FeB phase and the more prominent Fe2B phase. In addition to this two-phase structure, undesirable phases SiC and Fe3O4 were detected in the material boronized for 4h. It was observed that the wear resistance and hardness of the boronized materials increased greatly, which is explained by the hard FeB and Fe2B phases. In addition, as the heat treatment time increases, the thickness of the FeB phase increases while the thickness of the Fe2B phase decreases.

 In this study, AISI 1018 steel with low carbon content was coated with the pack-boriding method at 950 C for 2h and 4h. A two-layer structure was observed in the 2h boronized material: the thin FeB phase and the more prominent Fe2B phase. In addition to this two-phase structure, undesirable phases SiC and Fe3O4 were detected in the material boronized for 4h. It was observed that the wear resistance and hardness of the boronized materials increased greatly, which is explained by the hard FeB and Fe2B phases. In addition, as the heat treatment time increases, the thickness of the FeB phase increases while the thickness of the Fe2B phase decreases.

Makale detayları

Coating of AISI 1018 steel with the pack-boriding method

Yazarlar:

Ramazan Erarslan | Uğur Öztürk | Fikret Yılmaz

Yayıncı:

Tokat Gaziosmanpasa University

Ana Başlıklar:

Engineering

Dergi:

Journal of New Results in Science Vol.12 Issue 1, pp.14-21

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001289050

pISSN:

1304-7981

AISI 1018 steel

Pack boriding

Wear properties

Hardness

Sayı

Makale detayları

Coating of AISI 1018 steel with the pack-boriding method

Yazarlar: Ramazan Erarslan | Uğur Öztürk | Fikret Yılmaz

Yayıncı: Tokat Gaziosmanpasa University

Ana Başlıklar: Engineering

Dergi: Journal of New Results in Science Vol.12 Issue 1, pp.14-21

Belge Tipi: Makale

Yayın Tarihi: 4/2023

Belge Dili: İngilizce

Document ID (Org No.): 2001289050

pISSN: 1304-7981

AISI 1018 steel

Pack boriding

Wear properties

Hardness

Sayı

Yazarlar:

Ramazan Erarslan | Uğur Öztürk | Fikret Yılmaz

Yayıncı:

Tokat Gaziosmanpasa University

Ana Başlıklar:

Engineering

Dergi:

Journal of New Results in Science Vol.12 Issue 1, pp.14-21

Belge Tipi:

Makale

Yayın Tarihi:

4/2023

Belge Dili:

İngilizce

Document ID (Org No.):

2001289050

pISSN:

1304-7981