Optimization of the Process the Mixture of Copper ores for Melting the Analytical Method

Muharrem ZABELİ; Bastri ZEKA; Nurten DEVA

Makale detayları

Optimization of the Process the Mixture of Copper ores for Melting the Analytical Method

Yazarlar:

Muharrem ZABELİ | Bastri ZEKA | Nurten DEVA

Yayıncı:

Selcuk University

Dergi:

Journal of International Environmental Application and Science 2017 Vol.12 Issue 1, pp.59-62

Belge Tipi:

Makale

Yayın Tarihi:

3/2017

Belge Dili:

İngilizce

Document ID (Org No.):

2000483825

Sıklık:

Üç Aylık

eISSN:

2636-7661

pISSN:

1307-0428

Özet:

 


The basic aim of the process of smelting in furnaces
with flame is smelting full of material and reaching effects optimal technical
or economical to process with minimum consumption of fuel, maximum speed and
pass as full of copper in the main product of the merger in Matte. In oven with
flame, except concentration concentrate can be processed and also other
material that contents copper or other precious metals that are characterized
by the fine granulomeric structure as: Rich copper ore; Rich ores of precious
metals; Furnace dust in copper metallurgy; The converter slag; Restoration
materials with flame furnace; Surpluses and by-products of different branches
of the metallurgy. One of the most important factors to good work the operation
of the furnace development of chemical reactions that enable the creation of
products composed of certain (mattes and slag) is the process of calculating
(determining) the amount of ore that must be mixed and which are available
amalgamation. Determination as accurate enabled by knowledge on the theoretical
foundations of the process of melting the ore different copper chemical
reactions that must take place during melting, accurate calculations and work
much better furnace for melting with all assistive devices.

.

Makale detayları

Optimization of the Process the Mixture of Copper ores for Melting the Analytical Method

Yazarlar: Muharrem ZABELİ | Bastri ZEKA | Nurten DEVA

Yayıncı: Selcuk University

Dergi: Journal of International Environmental Application and Science 2017 Vol.12 Issue 1, pp.59-62

Belge Tipi: Makale

Yayın Tarihi: 3/2017

Belge Dili: İngilizce

Document ID (Org No.): 2000483825

Sıklık: Üç Aylık

eISSN: 2636-7661

pISSN: 1307-0428

Sayı

Yazarlar:

Muharrem ZABELİ | Bastri ZEKA | Nurten DEVA

Yayıncı:

Selcuk University

Dergi:

Journal of International Environmental Application and Science 2017 Vol.12 Issue 1, pp.59-62

Belge Tipi:

Makale

Yayın Tarihi:

3/2017

Belge Dili:

İngilizce

Document ID (Org No.):

2000483825

Sıklık:

Üç Aylık

eISSN:

2636-7661

pISSN:

1307-0428