Investigation of Microstructure and Mechanical Properties (Ni-Cr-Mo) Dental Prosthesis

Ebuzer Aygül

Makale detayları

Investigation of Microstructure and Mechanical Properties (Ni-Cr-Mo) Dental Prosthesis

Yazarlar:

Ebuzer Aygül

Yayıncı:

Mus Alparslan University

Ana Başlıklar:

Biyomedikal Mühendisliğinde Biyomateryaller

Dergi:

Hendese Teknik Bilimler ve Mühendislik Dergisi Vol.1 Issue 2, pp.62-66

Belge Tipi:

Makale

Yayın Tarihi:

10/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001330560

pISSN:

3023-7777

Anahtar kelimeler:

Özet:

 Ni63.4-Cr23.6-Si1.4-Mo11 metal ceramic CERMET dental alloy is widely used in dentistry applications instead of expensive alloys. The biocompatibility of the Ni63.4-Cr23.6-Si1.4-Mo11 alloy may pose a problem due to the metals present in the alloy as a result of corrosion activity, so examining its microstructure and mechanical properties is quite important. 11mm diameter Ni63,4-Cr23,6-Si1,4-Mo11 alloy disc was produced using the standard casting method for analyzing. Scanning Electron Microscope SEM, X-ray Diffraction XRD, Energy Dispersive X-ray Spectroscopy EDX, Electrochemical Corrosion Tafel extrapolation and Micro Hardness test methods were used to examine the microstructure and mechanical properties of the alloy produced. According to the findings obtained from the results, the corrosion rate of the sample was measured as 940,3 x 10-3mpy and the average Vickers hardness value was 366,54 kg x mm-2. It was seen that the alloy was in dendritic structure from SEM analysis, and Ni dominant XRD phase was detected in XRD tester. It was seen in SEM mapping that all the elements used in the alloy showed a homogeneous structure.

 Ni63.4-Cr23.6-Si1.4-Mo11 metal ceramic CERMET dental alloy is widely used in dentistry applications instead of expensive alloys. The biocompatibility of the Ni63.4-Cr23.6-Si1.4-Mo11 alloy may pose a problem due to the metals present in the alloy as a result of corrosion activity, so examining its microstructure and mechanical properties is quite important. 11mm diameter Ni63,4-Cr23,6-Si1,4-Mo11 alloy disc was produced using the standard casting method for analyzing. Scanning Electron Microscope SEM, X-ray Diffraction XRD, Energy Dispersive X-ray Spectroscopy EDX, Electrochemical Corrosion Tafel extrapolation and Micro Hardness test methods were used to examine the microstructure and mechanical properties of the alloy produced. According to the findings obtained from the results, the corrosion rate of the sample was measured as 940,3 x 10-3mpy and the average Vickers hardness value was 366,54 kg x mm-2. It was seen that the alloy was in dendritic structure from SEM analysis, and Ni dominant XRD phase was detected in XRD tester. It was seen in SEM mapping that all the elements used in the alloy showed a homogeneous structure.

 Ni63.4-Cr23.6-Si1.4-Mo11 metal ceramic CERMET dental alloy is widely used in dentistry applications instead of expensive alloys. The biocompatibility of the Ni63.4-Cr23.6-Si1.4-Mo11 alloy may pose a problem due to the metals present in the alloy as a result of corrosion activity, so examining its microstructure and mechanical properties is quite important. 11mm diameter Ni63,4-Cr23,6-Si1,4-Mo11 alloy disc was produced using the standard casting method for analyzing. Scanning Electron Microscope SEM, X-ray Diffraction XRD, Energy Dispersive X-ray Spectroscopy EDX, Electrochemical Corrosion Tafel extrapolation and Micro Hardness test methods were used to examine the microstructure and mechanical properties of the alloy produced. According to the findings obtained from the results, the corrosion rate of the sample was measured as 940,3 x 10-3mpy and the average Vickers hardness value was 366,54 kg x mm-2. It was seen that the alloy was in dendritic structure from SEM analysis, and Ni dominant XRD phase was detected in XRD tester. It was seen in SEM mapping that all the elements used in the alloy showed a homogeneous structure.

 Ni63.4-Cr23.6-Si1.4-Mo11 metal ceramic CERMET dental alloy is widely used in dentistry applications instead of expensive alloys. The biocompatibility of the Ni63.4-Cr23.6-Si1.4-Mo11 alloy may pose a problem due to the metals present in the alloy as a result of corrosion activity, so examining its microstructure and mechanical properties is quite important. 11mm diameter Ni63,4-Cr23,6-Si1,4-Mo11 alloy disc was produced using the standard casting method for analyzing. Scanning Electron Microscope SEM, X-ray Diffraction XRD, Energy Dispersive X-ray Spectroscopy EDX, Electrochemical Corrosion Tafel extrapolation and Micro Hardness test methods were used to examine the microstructure and mechanical properties of the alloy produced. According to the findings obtained from the results, the corrosion rate of the sample was measured as 940,3 x 10-3mpy and the average Vickers hardness value was 366,54 kg x mm-2. It was seen that the alloy was in dendritic structure from SEM analysis, and Ni dominant XRD phase was detected in XRD tester. It was seen in SEM mapping that all the elements used in the alloy showed a homogeneous structure.

Makale detayları

Investigation of Microstructure and Mechanical Properties (Ni-Cr-Mo) Dental Prosthesis

Yazarlar:

Ebuzer Aygül

Yayıncı:

Mus Alparslan University

Ana Başlıklar:

Biyomedikal Mühendisliğinde Biyomateryaller

Dergi:

Hendese Teknik Bilimler ve Mühendislik Dergisi Vol.1 Issue 2, pp.62-66

Belge Tipi:

Makale

Yayın Tarihi:

10/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001330560

pISSN:

3023-7777

Dental prosthesis

Microstructure

Ni-Cr-MoDental prosthesis

Microstructure

Ni-Cr-Mo

Sayı

Makale detayları

Investigation of Microstructure and Mechanical Properties (Ni-Cr-Mo) Dental Prosthesis

Yazarlar: Ebuzer Aygül

Yayıncı: Mus Alparslan University

Ana Başlıklar: Biyomedikal Mühendisliğinde Biyomateryaller

Dergi: Hendese Teknik Bilimler ve Mühendislik Dergisi Vol.1 Issue 2, pp.62-66

Belge Tipi: Makale

Yayın Tarihi: 10/2024

Belge Dili: İngilizce

Document ID (Org No.): 2001330560

pISSN: 3023-7777

Dental prosthesis

Microstructure

Ni-Cr-MoDental prosthesis

Microstructure

Ni-Cr-Mo

Sayı

Yazarlar:

Ebuzer Aygül

Yayıncı:

Mus Alparslan University

Ana Başlıklar:

Biyomedikal Mühendisliğinde Biyomateryaller

Dergi:

Hendese Teknik Bilimler ve Mühendislik Dergisi Vol.1 Issue 2, pp.62-66

Belge Tipi:

Makale

Yayın Tarihi:

10/2024

Belge Dili:

İngilizce

Document ID (Org No.):

2001330560

pISSN:

3023-7777