OPTIMUM DESIGN OF OVERHEAD CRANE CONSTRUCTION USING THE BEES ALGORITHM

Sami YEŞİLBEL; Mahmut ÇİMEN; Mete KALYONCU

Makale detayları

OPTIMUM DESIGN OF OVERHEAD CRANE CONSTRUCTION USING THE BEES ALGORITHM

Yazarlar:

Sami YEŞİLBEL | Mahmut ÇİMEN | Mete KALYONCU

Yayıncı:

Necip Fazıl YILMAZ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

The International Journal of Materials and Engineering Technology 2021 Vol.4 Issue 2, pp.157-167

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000664038

Sıklık:

İki Yıllık

eISSN:

2667-4033

Özet:

 

In this study, the optimum design of an overhead crane construction was carried out using The Bees Algorithm in order to have minimum weight while fulfilling the desired technical and functional features. The sheet materials, which are the girders of overhead cranes, are produced by forming boxes and welding to each other, the largest item is the amount of material used. In addition, the major factor affecting the movements and operating costs during their operations is the mechanical construction. For these reasons, it is very important that the weight of the crane that will do the lifting work with the same characteristics is low and the construction work is also outside the operation. Therefore, the purpose of the design of the crane is to provide maximum performance with minimum cost from the system. In the construction design of the overhead crane, it is necessary to make the most appropriate choices according to the important parameter, such as weight, overhead span, variable parameters of the working class, as well as minimized fire. In this type of displaying The Bees Algorithm, a sample overhead crane construction design, necessary and constraints were defined and the most appropriate parameters were provided. An overhead crane was compared numerically before and after optimization for the design parameters determined according to the FEM (Federation Europenne de la Manutetion) standard. Obtained results are given in the form of tables.

Makale detayları

OPTIMUM DESIGN OF OVERHEAD CRANE CONSTRUCTION USING THE BEES ALGORITHM

Yazarlar: Sami YEŞİLBEL | Mahmut ÇİMEN | Mete KALYONCU

Yayıncı: Necip Fazıl YILMAZ

Ana Başlıklar: Diğer mühendislik dalları

Dergi: The International Journal of Materials and Engineering Technology 2021 Vol.4 Issue 2, pp.157-167

Belge Tipi: Makale

Yayın Tarihi: 12/2021

Belge Dili: İngilizce

Document ID (Org No.): 2000664038

Sıklık: İki Yıllık

eISSN: 2667-4033

Sayı

Yazarlar:

Sami YEŞİLBEL | Mahmut ÇİMEN | Mete KALYONCU

Yayıncı:

Necip Fazıl YILMAZ

Ana Başlıklar:

Diğer mühendislik dalları

Dergi:

The International Journal of Materials and Engineering Technology 2021 Vol.4 Issue 2, pp.157-167

Belge Tipi:

Makale

Yayın Tarihi:

12/2021

Belge Dili:

İngilizce

Document ID (Org No.):

2000664038

Sıklık:

İki Yıllık

eISSN:

2667-4033