Mechanical Properties of LLDPE Composites Reinforced with Woven Horsehair Fabrics

Sümeyye Üstüntağ

Makale detayları

Mechanical Properties of LLDPE Composites Reinforced with Woven Horsehair Fabrics

Yazarlar:

Sümeyye Üstüntağ

Yayıncı:

Cukurova University

Ana Başlıklar:

Tekstil Bilimi

Dergi:

Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.40 Issue 1, pp.99-109

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001343972

pISSN:

2757-9255

Anahtar kelimeler:

Özet:

 This study aims to enhance the mechanical properties of linear low-density polyethylene LLDPE based composites by utilizing fabrics woven from horse tail hair as reinforcement. The warp and weft thread comprised bundles containing 20 hairs each in fabric production. The warp density was kept constant while two different weft densities, 5 bundlescm and 7 bundlescm, were used. Plain and 21 twill were selected as the weave type. All fabrics, except for the reference sample, were coated with ethylene vinyl acetate EVA. The coating increased the tensile strength of the composite in the weft direction by 11.69 compared to untreated fabrics. As the fabrics weft density increased, the tensile and flexural strength of the composites in the weft direction improved. A slight decrease in tensile strength was observed in the composites with the 21 twill weaving structure compared to the plain weaving, while an increase in flexural strength was noted with the plain weaving structure.

 This study aims to enhance the mechanical properties of linear low-density polyethylene LLDPE based composites by utilizing fabrics woven from horse tail hair as reinforcement. The warp and weft thread comprised bundles containing 20 hairs each in fabric production. The warp density was kept constant while two different weft densities, 5 bundlescm and 7 bundlescm, were used. Plain and 21 twill were selected as the weave type. All fabrics, except for the reference sample, were coated with ethylene vinyl acetate EVA. The coating increased the tensile strength of the composite in the weft direction by 11.69 compared to untreated fabrics. As the fabrics weft density increased, the tensile and flexural strength of the composites in the weft direction improved. A slight decrease in tensile strength was observed in the composites with the 21 twill weaving structure compared to the plain weaving, while an increase in flexural strength was noted with the plain weaving structure.

 This study aims to enhance the mechanical properties of linear low-density polyethylene LLDPE based composites by utilizing fabrics woven from horse tail hair as reinforcement. The warp and weft thread comprised bundles containing 20 hairs each in fabric production. The warp density was kept constant while two different weft densities, 5 bundlescm and 7 bundlescm, were used. Plain and 21 twill were selected as the weave type. All fabrics, except for the reference sample, were coated with ethylene vinyl acetate EVA. The coating increased the tensile strength of the composite in the weft direction by 11.69 compared to untreated fabrics. As the fabrics weft density increased, the tensile and flexural strength of the composites in the weft direction improved. A slight decrease in tensile strength was observed in the composites with the 21 twill weaving structure compared to the plain weaving, while an increase in flexural strength was noted with the plain weaving structure.

 Bu çalışma, takviye malzemesi olarak at kuyruğu kılından dokunmuş kumaşlar kullanarak LLDPE Doğrusal Düşük Yoğunluklu Polietilen bazlı kompozitlerin mekanik özelliklerini iyileştirmeyi amaçlamaktadır. Kumaş üretiminde çözgü ve atkı iplikleri olarak her biri 20 kıldan oluşan demetler kullanılmıştır. Çözgü sıklığı sabit tutulurken, iki farklı atkı sıklığı 5 demetcm ve 7 demetcm kullanılmıştır. Dokuma tipi olarak 21 dimi ve düz dokuma seçilmiştir. Referans numune hariç tüm kumaşlar etilen vinil asetat EVA ile kaplanmıştır. Kaplama işlemi, işlenmemiş kumaşlara kıyasla kompozitin atkı yönündeki çekme dayanımını 11,69 oranında artırmıştır. Kumaşın atkı sıklığı arttıkça, kompozitlerin atkı yönündeki çekme ve eğilme dayanımları iyileşmiştir. 21 dimi dokuma yapısına sahip kompozitlerde, düz dokumaya kıyasla çekme dayanımında hafif bir azalma gözlemlenirken, eğilme dayanımında ise düz dokuma yapısıyla artış kaydedilmiştir.

Makale detayları

Mechanical Properties of LLDPE Composites Reinforced with Woven Horsehair Fabrics

Yazarlar:

Sümeyye Üstüntağ

Yayıncı:

Cukurova University

Ana Başlıklar:

Tekstil Bilimi

Dergi:

Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.40 Issue 1, pp.99-109

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001343972

pISSN:

2757-9255

Horsehair

Woven fabric

Composite

Ethylene vinyl acetate

Linear low-density polyethyleneAt kılı

Dokuma kumaş

Kompozit

Etilen vinil asetat

Doğrusal Düşük Yoğunluklu Polietilen

Sayı

Makale detayları

Yazarlar: Sümeyye Üstüntağ

Yayıncı: Cukurova University

Ana Başlıklar: Tekstil Bilimi

Dergi: Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.40 Issue 1, pp.99-109

Belge Tipi: Makale

Yayın Tarihi: 3/2025

Belge Dili: İngilizce

Document ID (Org No.): 2001343972

pISSN: 2757-9255

Sayı

Yazarlar:

Sümeyye Üstüntağ

Yayıncı:

Cukurova University

Ana Başlıklar:

Tekstil Bilimi

Dergi:

Çukurova Üniversitesi Mühendislik Fakültesi Dergisi Vol.40 Issue 1, pp.99-109

Belge Tipi:

Makale

Yayın Tarihi:

3/2025

Belge Dili:

İngilizce

Document ID (Org No.):

2001343972

pISSN:

2757-9255